Browsing by Author "Artsis, Marina"
Now showing 1 - 18 of 18
Results Per Page
Sort Options
- Item11th International conference «On frontiers of polymers and advanced materials» (ICFPAM) (Incorporating Biomaterials Africa 2011)(Publishing House of Lviv Polytechnic National University, 2011) Zaikov, Gennady; Madyuskina, Larisa; Artsis, Marina
- Item12th European meeting on fire retardant polymers(Publishing House of Lviv Polytechnic National University, 2010) Zaikov, Gennady; Madyuskina, Larisa; Artsis, Marina
- Item14th International scientific conference on “Polymeric materials”(Publishing House of Lviv Polytechnic National University, 2010) Zaikov, Gennady; Artsis, Marina; Madyuskina, Larisa
- Item16th International conference for renewable resources and plant biotechnology (NAROSSA® 2010)(Publishing House of Lviv Polytechnic National University, 2010) Zaikov, Gennady; Madyuskina, Larisa; Artsis, Marina
- Item20th annual recent advances in flame retardancy of polymeric materials(Publishing House of Lviv Polytechnic National University, 2009) Artsis, Marina; Zaikov, Gennady; Madyuskina, Larisa
- Item5th International conference on “Times of polymer (TOP) and composites”(2010) Zaikov, Gennady; Artsis, Marina; Madyuskina, Larisa
- Item6th International conference on “Times of polymer (TOP) and composites”(Publishing House of Lviv Polytechnic National University, 2012) Zaikov, Gennady; Zimina, Lidiya; Artsis, Marina; Madyuskina, Larisa
- ItemAchievements and research tasks for polyvinylchloride ageing and stabilization(Publishing House of Lviv Polytechnic National University, 2008) Minsker, Karl; Zaikov, Gennady; Artsis, MarinaPerspectives of polyvinylchloride (PVC) production without labile groups in a backbone have been considered. It has been shown that such production provides drastic increase of an intrinsic stability of polymeric products, possibility of PVC processing with the minimum amounts or in total absence of stabilizers and other chemicals-additives and the opportunity of creation materials and products on a PVC basis with the essentially increased life time. Data allowing to create rigid, semi-rigid and flexible (plasticized) materials and products with the minimum amounts of chemicals-additives and prolonged life time of their service at exploitation under natural and special conditions are presented. Розглянуто перспективи виробництва полівінілхлориду (ПВХ) за відсутності лабільних груп у головному ланцюгу. Показано, що таке виробництво забезпечує значне підвищення внутрішньої стабільності полімерних продуктів, можливість обробки ПВХ за мінімальної кількості або відсутності стабілізаторів та інших хімічних додатків. Це також дозволяє створювати матеріали і продукти на основі ПВХ з продовженим терміном експлуатації. Наведені результати дозволяють створювати жорсткі, напівжорсткі та гнучкі (пластичні) матеріали і продукти з мінімальним вмістом хімічних додатків та продовженим терміном експлуатації за природних та спеціальних умов.
- ItemBiodegradation of polymeric material and adhesive properties of cells of microorganisms(Publishing House of Lviv Polytechnic National University, 2010) Zaikov, Gennady; Gumargalieva, Klara; Artsis, MarinaThe chemical composition of cell membranes of microscopic fungi destroying polymericmaterials is analyzed. The concentrations of the major chemical components –phospholipids, glycans, and amines – in nine types of fungi are estimated. The measured ratios of these components provide an estimate of the hydrophobic properties of conidia, controlling microorganism adhesion to polymer surface and subsequent degradation of polymeric materials. Проаналізовано хімічну структуру клітинних мембран мікроскопічних грибків, що руйнують полімерні матеріали. Для дев’ятьох типів грибків встановлені концентрації основних хімічних компонентів – фосфоліпідів, глісанів і амінів. Одержані дані дозволяють оцінити гідрофобні властивості конідії, що дає можливість контролювати її адгезію до полімерних поверхонь та подальшу деградацію полімерних матеріалів.
- ItemComparative dynamic characteristics of electrospun ultrathin fibers and films based on poly(3-hydroxybutyrate)(Publishing House of Lviv Polytechnic National University, 2016) Staroverova, Olga; Karpova, Svetlana; Iordanskii, Alexey; Olkhov, Anatoliy; Khvatov, Anatoliy; Grumezescu, Alexandru Mihai; Kildeeva, Natalia; Artsis, Marina; Zaikov, GennadyThe dynamic of polymer chains for electrospun poly(3-hydroxybutyrate) (PHB) fibers and the PHB films was studied with spin probe characteristics obtained by ESR technique. The ESR data combined with DSC analysis reveal the presence of two TEMPO probe populations with different correlation times indicating the heterogeneous structure of intercrystalline areas in the films, fibers and the cold rolled fiber mats. The ESR data are in agreement with the 2-mode model of amorphous state in semicrystalline polymers. The difference in peak intensities shows that effective correlation time in the electrospun fibers exceeds the same characteristic in the film, that also indicates the slower molecular mobility in the low-dense amorphous fraction of PHB fibers as compared to the film. The impact of potential aggressive factors such as water, temperature and ozone upon probe mobility allows suggesting that both the fiber electrospinning and the cold-rolling procedure lead to rearrangement in the intercrystalline fields of PHB that contribute to the progress in the fiber stabilization against the aggressive factors. З метою дослідження динаміки полімерних сегментів методом зондової спектроскопії ЕПР проведено порівняльний аналіз плівок та ультратонких волокон полі(3-гідроксибутирату) (ПГБ). Волокна отримані методом електроформування і додатково досліджені методом ДСК. Показано, що у міжкристалічних областях існують дві популяції молекулярного зонду ТЕМПО, які відрізняються часом кореляції і розташовані у більш або менш щільних областях ПГБ, що узгоджується з бімодальною моделлю аморфного стану в частково кристалічних полімерах. Різниця в ЕПР спектрах доводить, що молекулярна рухомість зонду у волокнах сповільнена порівняно з його рухомістю у плівках ПГБ. Додатково розглянутий вплив агресивного середовища (води і озону) за підвищених температур і показано, що в процесах холодної обкатки або витягуванні волокна при електроформуванні відбувається перебудова міжкристалічних областей ПГБ, що сприяє стабілізації фібрилярної структури проти дії зовнішнього агресивного середовища.
- ItemDegradation of polymers in aggressive media. Kinetic approach(Publishing House of Lviv Polytechnic National University, 2009) Zaikov, Gennady; Artsis, MarinaThe degradation of polymers in aggressive media is a complex physico-chemical process including adsorption, diffusion and the dissociation of chemically unstable bonds. The course of degradation has a number of special features, which are linked both with the specific structure of polymeric materials and with specific kinetics of reactions in solids. Показано що розклад полімерів в агресивному середовищі є складним фізико-хімічним процесом який включає в себе адсорбцію, дифузію і дисоціацію хімічно нестабільних зв'язків. Встановлено, що на розклад впливає як будова полімерних матеріалів, так і кінетика реакцій у твердому стані.
- ItemElastomery 2013 “Science and industry” XV International science and technology conference(Publishing House of Lviv Polytechnic National University, 2014) Zaikov, Gennady; Madyuskina, Larisa; Artsis, Marina; Zimina, Lidiya
- ItemFirst International conference on biodegradable polymers and sustainable composites(Publishing House of Lviv Polytechnic National University, 2008) Zaikov, Gennady; Artsis, Marina
- ItemIV International Conference on “Times of Polymer (top) and Composites"(Publishing House of Lviv Polytechnic National University, 2009) Zaikov, Gennady; Artsis, Marina; Madyuskina, Larisa
- ItemSecond international conference on Biodegradable Polymers and Sustainable Composites (BIOPOL-2009)(Publishing House of Lviv Polytechnic National University, 2010) Zaikov, Gennady; Madyuskina, Larisa; Artsis, Marina
- ItemStabilization of polymers from the influence of biological media. Kinetic method of biocide efficiency estimation(Publishing House of Lviv Polytechnic National University, 2011) Artsis, Marina; Zimina, Lidiya; Gumargalieva, Klara; Zaikov, GennadyIn this paper the contributors show the value of application of kinetic methods for the estimation of biocide activity. The authors have developed methods of quantitative estimation of biocide efficiency independent of its solubility in water. It is found that inhibited kinetics of microscopic fungal growth on nutriments with biocides is described by a logistic equation. They suggest parameters for the characterization of biocides efficiency. Показано застосування кінетичних методів для оцінки активності біоцидів. Розроблено методи кількісної оцінки ефективності біоцидів незалежно від їх розчинності у воді. Знайдено, що інгібована кінетика росту мікроскопічних грибків для кормів з біоцидами описується логістичним рівнянням. Запропоновано параметри характеристики ефективності біоцидів.
- ItemXX Semenov’s Readings(Publishing House of Lviv Polytechnic National University, 2008) Zaikov, Gennady; Artsis, Marina
- ItemXXXI International vacuum microbalance techniques conference(Publishing House of Lviv Polytechnic National University, 2008) Zaikov, Gennady; Artsis, Marina