Радіоелектроніка та телекомунікації. – 2016. – №849
Permanent URI for this collectionhttps://ena.lpnu.ua/handle/ntb/36073
Відображено результати досліджень з теорії та проектування радіоелектронних кіл та пристроїв, антен і пристроїв НВЧ-діапазону, систем телекомунікації та інформаційних мереж, а також математичного моделювання та конструювання радіоелектронних схем і радіоапаратури. Для наукових працівників, інженерів та студентів старших курсів, фахівців з радіотехніки, інформаційних технологій та телекомунікаційних систем, матеріалознавства, інформатики, вимірювання і контролю якості.
Вісник Національного університету «Львівська політехніка». Серія: Радіоелектроніка та телекомунікації : збірник наукових праць / Міністерство освіти і науки України, Національний університет «Львівська політехніка»; голова Редакційно-видавничої ради Н. І. Чухрай. – Львів : Видавництво Львівської політехніки, 2016. – № 849. – 307 с. : іл.
Browse
Item Моделювання плазмонних властивостей нанокомпозитних матеріалів на основі алмазоподібної вуглецевої плівки та наночастинок срібла(Видавництво Львівської політехніки, 2016) Яремчук, І. Я.; Фітьо, В. М.; Бобицький, Я. В.Розраховано оптичні константи алмазоподібної вуглецевої плівки, з диспергованими в неї наночастинками срібла різної форми, за допомогою ефективної теорії Максвелла–Гарнетта. Здійснено моделювання оптичних характеристик нанокомпозитного матеріалу залежно від розміру і форми включень та матеріалу матриці. Optical characteristics of nanocomposite materials have been modeled depends on materials of the nanoparticles and the matrix, the size and shape of nanoparticles. The optical constants of diamond-like carbon films doped with nanoparticles of silver are considered within the framework of the effective theory of Maxwell–Garnett. It is shown that the concentration, size, shape of nanoparticles and the interaction between them affect the value of the complex effective refractive index of the nanocomposite and are crucial for provision of maximum absorption peak (plasmon peak) and the width of the absorption spectrum. The modeling of the optical properties of the diamond-like carbon film doped by silver nanoparticles with spheroidal shape was provided. In this case the plasmon peaks are shifted to longer wavelengths and broadened. In addition, additionale absorption peaks appear. It is demonstrate that renormalized Maxwell–Garnett effective theory, which includes size effect and near field interaction between nanoparticles, can be successfully applied to describe the optical properties of silver diamond-like carbon nanocomposite films with the high concentration of Ag nanoparticles. The obtained results suggest as well that a random mixture consisting of a diamond-like carbon film with embedded isolated silver inclusions is promising material for the fabrication of tunable nanocomposites that could used in different optical systems employing surface plasmon resonance.Item Захист інформації з інтелектуальною підтримкою організаційно-технічного й оперативного управління(Видавництво Львівської політехніки, 2016) Толюпа, С. В.; Пархоменко, І. І.Для успішного використання сучасних інформаційних технологій необхідно ефективно управляти не тільки мережею, але і її системою захисту інформації (СЗІ), при цьому на рівні інформаційної системи автономно повинна працювати система, яка реалізує управління складом подій інформаційної безпеки, планування модульного складу СЗІ й аудиту. З огляду на те, що СЗІ є доволі складною організаційно-технічною системою, що функціонує в умовах невизначеності, суперечливості та неповноти знань про стан інформаційного середовища, управління такою системою має ґрунтуватися на застосуванні методів теорії прийняття рішень і необхідності застосування інтелектуальних технологій. For the successful use of modern information technologies, it is necessary to effectively manage not only the network, but also information systems security (ISS), the information system on the level of the system must operate autonomously implementing the management structure of information security events, planning the composition of modular ISS and audit. ISS is a very complex organizational and technical system, which works under conditions of uncertainty, inconsistency and incompleteness of knowledge about the state of the information environment, the management of such system should be based on the use of methods of the theory of decision-making and the need for the use of intelligent technologies. One solution to this problem is to use the intelligent methods to support decision-making in the management of IS local information system, which, in turn, requires the development based on the principles of system analysis and general scientific approaches methodological framework for the protection of information management, the relevant models, methods, algorithms and software. The circuit of organizational and technical management are mechanisms to protect the information management infrastructure with changing business applications, information processing plans and corresponding to the level of data protection requirements. The circuit includes: intelligent decision support for the choice of strategies to protect system security level evaluation system (risk) control action is implemented by employees of information security department. The command information is generated during the planning - targeted selection of a rational complex remedies. Formed operational command information that is communicated to the security administrator control object or automatically by means of implementing control actions on the built-in protection circuit control modules in the operational management. The proposed structure of building intellectual support system of operational management can be built by this principle. By development of the intellectual system of operative management it is suggested to choose an unclear model. It is related to that considerable part of information about reasons and sources of anomalous events can be got only an expert way or as heuristic descriptions of processes. For determination of sources of АP IS must be presented by the model of that informative network to that she is oriented. This model divides the task of moving to information between computers through the environment of network on the amount of levels of less large and easier solvable small tasks. Each of these small tasks decides by means of one network level. Thus it can be argued that the methodological basis of the information security management in the segment of the local information system, based on system analysis and general laws of building management systems, the novelty of which lies in the totality of the developed methods, principles of building architecture information security management system with intelligent support for organizational and technical and operational management, which allows a rapid and informed decisions to ensure the required level of data protection.Item Дослідження доступності у хмарних сервісних системах(Видавництво Львівської політехніки, 2016) Климаш, М. М.; Демидов, І. В.; Мохамед Мехді Ель Хатрі; Дещинський, Ю. Л.Наведено результати числового моделювання сервісної доступності хмарних сервісних систем для різних їх конфігурацій, характеристик трафіку та режимів роботи, а також проведено оцінювання ефективності застосування запропонованого методу підвищення показників доступності вузлів хмарної платформи. This paper is devoted to the numerical investigation of the availability at cloud service systems. In this paper criteria and constraints calculations were performed and obtained results were analyzed for synthesis purposes of distributed service platforms based on the cloud service-oriented architecture such as availability and system performance index variations by defined set of the main parameters. The method of synthesis has been numerically generalized considering the type of service workload in statistical form by Hurst parameter application for each integrated service that requires implementation within the service delivery platform, which is synthesized by structural matching of virtual machines using combination of elementary servicing components up to functionality into a best-of-breed solution. As a result of restrictions from Amdahl’s Law the necessity of cloud-networks clustering was shown, which makes it possible to break the complex dynamic network into separate segments that simplifies access to the resources of virtual machines and, in general, to the "clouds" and respectively simplifies complex topological structure, enhancing the overall system performance. In overall, proposed approaches and obtained results numerically justifying and algorithmically describing the process of structural and functional synthesis of efficient distributed service platforms, which under process of their configuring and exploitation provides an opportunity to act on the dynamic environment in terms of comprehensive services range and nomadic users’ workload pulsing. It was also proved that using proposed approach and algorithm promotes us to determine structural-topological changes operatively in dynamics. It allows improving workload balancing in the servicing nodes, avoiding the proximity of workflows and components of complex services to structural irregularities. The whole spatial workflow distribution on the servicing network is optimized and smoothed in accordance with operatively determined workload and structural features. Cloud system service node’s availability is improved. Prospective usage of proposed algorithm is looking effectively within distance-vector routing protocols (such as BGP) and, in particular at hyperbolic virtual coordinates mapping, where hyper-aggregation of the flows on the edges of Poincare disk’s irregularities is observed.Item Оптимізація геометрії лінійного електрооптичного ефекту в кристалах LiNbO3:MgO(Видавництво Львівської політехніки, 2016) Бурий, О. А.; Андрущак, Н. А.; Яремко, О. М.; Убізський, С. Б.За методом екстремальних поверхонь визначено глобальний максимум лінійного електрооптичного ефекту в кристалах LiNbO3:MgO. Показано, що максимально досяжні наведені значення зміни оптичного шляху для звичайної та незвичайної хвиль становлять 119 та 277 пм/В для довжини хвилі 632.8 нм та кімнатної температури, а глобальний максимум за різницею ходу для хвиль ортогональної поляризації становить 269 пм/В. Ці величини перевищують у ~1.5; 1.7 та 2.3 разу відповідні значення ефекту на прямих зрізах цих кристалів. The global maxima of linear electro-optic effect are determined for LiNbO3:MgO crystal by extreme surfaces method. As it is shown, the maximal achievable values of the reduced optical pathlength changes for the ordinary and extraordinary waves are equal to 119 and 277 pm/V correspondingly for the wavelength of 632.8 nm and room temperature whereas the global maximum of the path difference between the orthogonally polarized waves is equal to 269 pm/V. These maxima are 1.5, 1.7 and 2.3 times higher than the corresponding values for the direct cuts of these crystals.Item SPICE модель квадратурного синхронного детектора вимірювальних перетворювачів імпедансу(Видавництво Львівської політехніки, 2016) Барило, Г. І.; Вірт, В. В.; Голяка, Р. Л.; Готра, З. Ю.Представлена задача SPICE моделювання вимірювальних перетворювачів імпедансу, на яких оснований широкий ряд мікроелектронних сенсорів імпедансної спектроскопії, зокрема, для Інтернету речей. Запропоновано SPICE модель та методику параметричного аналізу синхронних детекторів пристроїв імпедансної спектроскопії, основою якої є поєднання двох типів аналізу – AC analysis та Transient analysis. На основі AC аналізу отримують номінальні значення активної ReZ та реактивної ImZ складових імпедансу. Натомість, на основі Transient аналізу отримують значення цих складових з урахуванням фактичних параметрів сигналів та елементної бази вимірювального перетворювача. Поєднання AC та Transient аналізів з порівнянням їх результатів забезпечує можливість подальшої оптимізації та покращення параметрів схем вимірювальних перетворювачів імпедансу. The task of impedance measurement transducers’ SPICE simulation is presented. Wide range of impedance spectroscopy microelectronic sensors, namely, for Internet of things, are based on such measurement transducers. One of the attractive aspect of impedance spectroscopy as a tool for investigating is the direct connection that often exists between the behavior of a real system and that of an idealized model circuit consisting of discrete electrical components. The paper describes the approach to Nyquist impedance plot calculation using SPICE models based on quadrature synchronous detectors. Based on AC analysis and Transient analysis combination a SPICE model and a technique for parametric analysis of impedance spectroscopy devices’ quadrature synchronous detectors are proposed. Nominal values of impedance, namely its real ReZ and imaginary ImZ parts, are calculating using the SPICE models AC analysis. On the contrary, caused by factual parameters of signals and transducer circuit components the factual real and imaginary parts values of impedances are calculating using the SPICE model Transient analysis. A signal of impedances real part is detecting and integrating inphase with driving wave, namely, the sinusoidal current wave through object to be measured, while a signal of imaginary part is detecting and integrating with p/2 phase shift. Both of AC and Transient analysis combination and its data comparison is the key solution to further optimization and parameters improvement of impedance measurement transducer circuits.Item Синтез передавальної функції за відомою амплітудно-частотною характеристикою(Видавництво Львівської політехніки, 2016) Матвійчук, Я. М.Показано обчислення коефіцієнтів передавальної функції лінійної системи із зосередженими постійними параметрами, що відтворює задану амплітудно-частотну характеристику, двома методами. Застосовано перетворення Гільберта для розрахунку фазо-частотної характеристики з мінімальною фазою. Методи порівняно на конкретному прикладі. Всі розрахунки виконано в системі MATLAB. The calculation of the coefficients of linear system transfer function with the lumped constant parameters which corresponds to the preset frequency response is present. Calculation of the transfer function on a given frequency response is the optimization problem. Direct solution has multiextremal nonlinear optimization. Hilbert transform is applied to calculate the minimum-phase phase response. Therefore, the optimization problem of calculating the coefficients of the transfer function has complex goal function with some restrictions. An example of the synthesis transfer function of the order seven for a given frequency response of real parametric amplifier is present. We obtain repeatability of the frequency response of less than 3%. All calculations is made in the systemMATLAB.Item Аналогова ФАПЧ як схемотехнічна основа ЧМ радіоприймачів(Видавництво Львівської політехніки, 2016) Павлов, Б. О.; Мелень, М. В.; Павлов, Ф. Б.Використання пристроїв фазового автопідстроювання частоти (ФАПЧ) як демодулятора сигналів з частотною модуляцією (ЧМ) дає змогу понизити поріг завадостійкості ЧМ радіоприймачів. Розглядаються характеристики і схемотехніка ЧМ демодуляторів, виконаних на основі аналогового пристрою ФАПЧ: діодних і транзисторного фазових детекторів, фільтрів нижніх частот, керованих напругою гетеродинів. Demodulators of broadband frequency modulated (FM) signals are characterized by noise immunity threshold – the phenomenon of rapid deterioration of signal-to-noise ratio on its output with the slight deterioration of this ratio on its input. The classic elements of the block diagram of FM signals receiving devices are the amplitude limiter and frequency detector, where the last one is practically implemented by transforming frequency modulation into phase modulation and phase modulation into amplitude modulation. But nowadays there are many other methods of receiving and demodulating of FM signals that provide greater noise immunity. These known noise immune systems with revers control are described by differential equations, which is a particular case of phase-locked loop (PLL) device equations, or are driven to them. The optimum filter to track the frequency that is slowly changing, is the PLL system with second-order proportionalintegrating filter. This conclusion is approved by the theory of optimal linear filtering. With minor interference and relatively small signal jitter comparatively to own generator frequency accept that working area of phase detector characteristics is linear, and transfer ratio coefficient in a locked loop is defined by a formula known from the theory of linear reverse connection. The final results of the calculation of amplitude-phase-frequency characteristics of PLL device are listed in the normalized parameters as frequency hodograph. In the practical implementation of the PLL its parameters adequacy must be checked by calculations. Such verification performed at frequencies with maximum transfer rate is equal to 1 and 0,7. The presence of parasitic frequency dependent elements in a reverse locked loop circuit results in the deterioration of the real system functioning. Since one of the noise immunity characteristics of the device is its noise band, the requirement of slight increase of this band was adopted as the noise immunity criterion in circuit with real elements comparing to theoretical model. The bridge phase detectors with diodes, with diodes and additional resistors, and parametric phase detectors with transistors are considered. For these circuit schemes, input and output resistors, transfer coefficients ant thermal currency instability were defined. Further the low-pass filters schemes, that have minimal phase shift at high frequencies and contribute to the stability conditions are considered. Also circuit voltage controlled oscillator for LC and RC-elements by their frequency generation and temperature stability are analyzed.Item Дослідження похибок суміщення стереопари растрів(Видавництво Львівської політехніки, 2016) Регуш, А. В.Проаналізовано похибки суміщення стереопари растрів, які виникають за рахунок геометричних та нелінійних спотворень окремих растрів. Розглянуто сумарну похибку місцеположення елементів суміщених растрів за рахунок цих спотворень. Stereo television scanning optical microscope (STSOM) – is a microscope, its operating principle is based on using as the light source cathode ray tubes (CRT). Using STSOM which provide three-dimensional perception of the image investigated object (IO), significantly expands descriptiveness and as a result speed and quality of conducting research. For forming the stereoscopic image in STSOM is used stereo pair united in the plane of IO two rasters. There are following variants of forming stereo pair of rasters: with two CRT and with one CRT. The two rasters are combined in the plane of IO by using: lens which axis are located parallel or at an angle and lens which axis are parallel and are shifted relative to the center. The choice of a variant depends on the geometric distortion of stereo pair of rasters which affect on precision of forming stereoscopic image of IO. At combining of stereo pair arise a distortion which make obstacle in perception of stereo effect and might lead to his loss. One of the important parameters of any stereo system is its number of plans by depth which is determined by distance between two points of rasters for the left and right eye which can be distinguish. Minimal relative error of any element location of first scanning raster in relation to the corresponding element of the second scanning raster of stereo pair of rasters depends on the number of plans by depth and. Total error of location determined by errors at the expense of geometrical distortions of rasters, nonlinear distortions of rasters, unequal dimensions of scanning rasters, offset of a one rasters of stereo pair with regard to the second raster and rotation one rasters of stereo pair with regard to the second raster. Analysis of errors that arise by combining two rasters was conducted. By combining two rasters centers of rasters are combined and errors their respective points are added. By combining two rasters with identical distortions horizontal error or vertical error will remain such for one raster, as combined raster elements will be shifted by the same amount, stereo effect will be not lost. The biggest error will be at the combining rasters with distortion “barrel” in one raster and distortion “pillow” in the second raster. The total error of geometrical distortion at every point of scanning rasters will be determined by the square root of the sum of squared errors horizontally and vertically. By using two CRTs total error will be the biggest at the edges of the raster and will fall to zero as it approaches to the center of the raster. By using one CRT total error of geometrical distortion is biggest with the combining rasters with distortions such as: trapeze – trapeze, trapeze – parallelogram and parallelogram – parallelogram. The analysis of errors by nonlinear distortions of raster were conducted. The biggest error is the combination of one edge of rasters. The smallest nonlinearity error is the combining in the deflection zone which corresponds to the time 0,6 line period.Item Модель мережі радіодоступу з використанням методу адаптивного формування структури(Видавництво Львівської політехніки, 2016) Гуськов, П. О.; Цуркан, А. С.; Шпур, О. М.; Бугиль, Б. А.; Климаш, М. М.Запропоновано метод адаптивного структурного синтезу мережі радіодоступу. Цей метод призначений для побудови мережі радіодоступу з використанням принципів детермінованої та стохастичної геометрії. Використовуючи засоби імітаційного моделювання, розроблено модель гетерогенної мережі, яка залежно від просторової локалізації та розподілу абонентського навантаження формує структуру мережі радіодоступу. Отримано залежності пропускної здатності, системної спектральної ефективності та розподілу навантаження по кожному структурному елементу мережі. Constantly increasing demand by mobile devices for higher data rates and new multimedia services support creates unprecedented challenges for future fifth generation (5G) mobile networks: 1000 times higher system capacity, up to 100 times higher peak user data rates and 10 times lower energy efficiency of today’s 4G networks. This stipulates changes of modern radio access networks (RAN). Existing deterministic approaches for RAN deployment and analysis that are used for optimal resource allocation are not compatible with future multitier heterogeneous networks, especially because of the fixed cells’ radius restrictions and the impossibility to respond to non-uniform load conditions. According to mentioned requirements, reasonable deployment expenditures and consistent quality of experience assurance small cells occur the most reasonable solution. In comparison to macrocells, low-cost small cells offer a significant capacity gain due to spatial reuse of spectrum. This paper presents the new approach for small cells deployment based on adaptive RAN structure synthesis method that generates the base stations on/off switching patterns and serves users by appropriate RAN entities according to current load distribution and network conditions. We consider three-tier Heterogeneous network where we integrate macro-, femtoand picocells. A method for services differentiation between RAN structural entities on different layers that support traffic aggregation is proposed. We developed simulation model that reflects the functioning of a RAN in real time and displays dependences of the network capacity, system spectral efficiency and load distribution on each RAN structural entity. The main advantages of proposed approach are flexibility, adaptability to non-uniform spatially distributed traffic and energy efficiency. The results show that with a slight decrease in the average throughput per UE (2–4 %) was observed the gain in energy consumption, by reducing the number of active elements in RAN structure by 30–40%. Future activities to this work involve assessing the network structure on the number of handovers, the development of intelligent frequency planning methods and the evaluation of backhaul capacity on overall performance in case of small cells deployment.Item Імітаційна макромодель поведінки абонентів у мережі коміркового зв’язку(Видавництво Львівської політехніки, 2016) Бак, Р. І.; Гуськов, П. О.; Лаврів, О. А.Запропоновано імітаційну макромодель поведінки абонентів у мережі коміркового зв’язку, яка враховує її структуру, особливості переміщення абонентів та їхню активність, зокрема процес генерації запитів абонентськими терміналами. На вході моделі задають параметри коміркової структури, інтервал моделювання, параметри потоку абонентських викликів, кількість груп абонентів за швидкістю переміщення та максимальну можливу швидкість переміщення абонентів. Результатами моделювання є сформована згідно із заданими правилами коміркова структура з базовими станціями, які розміщені в центрі шестикутних комірок, ємність мережі за викликами, згенеровані на інтервалі моделювання виклики абонентів, характеристика їх обслуговування та кількість необслужених викликів унаслідок перевантаження мережі з урахуванням особливостей переміщення абонентів. The paper proposes the simulation macro model of subscribers’ behavior in cellular communications network, considering its structure, peculiarities of the subscribers’ movement and their activity, including the requests generation process by subscribers’ terminals. Model input obtains the set of cellular structure parameters, simulation interval, parameters of the user’s requests flow, number or caller groups by moving speed and maximum possible speed of subscribers. The results of the simulation are: generated according to the set rules cellular structure of the base stations, which are located in the center of hexagonal cells, the capacity of the network in terms of calls, generated subscriber’s requests in the range of simulation interval, characteristics of their processing and the number of non-processed requests in the reason of network congestion considering the subscribers movement. The continuous hexagonal coverage of a given area with lowest possible ceiling and the maximal distances between neighboring base stations according with their cell ranges is received based on the proposed method of forming the cellular structure of mobile network received. It shows the number of base stations, their location. Based on subscriber’s movement simulation we define a set of coordinates of each subscriber location at any simulation step. These coordinates depict different scenarios of subscribers moving that consist of individual trajectories for each subscriber considering their personal speed and movement direction. The amount of required equipment to service the subscriber load entering the coverage zone may be calculated based on simulation results.Item Метод розроблення двочастотних мікрохвильових дискретних фазообертачів з відмінними фазовими зсувами у смугах частот(Видавництво Львівської політехніки, 2016) Прудиус, І. Н.; Оборжицький, В. І.; Сторож, В. Г.Запропоновано метод розрахунку електричних параметрів дискретних фазообертачів на комутованих каналах з двома робочими смугами частот і з різними в смугах значеннями різницевого фазового зсуву – дискрету фази. Метод ґрунтується на розробленні перемикачів з узгодженням і розв’язкою у двох робочих смугах і на заміні частотнозалежними еквівалентними ланками відрізків ліній у каналах, параметри яких відповідають відмінним у смугах частот фазовим дискретам. Наведено результати розрахунків і моделювання двоканального перемикача та фазообертачів з дискретами фази 450/450 і 450/900 на частотах 2,4/5,2 ГГц та 450/–450 на частотах 0,95/2,15 ГГц. This paper is devoted to design method of dual-band phase shifters, which can execute the assigned to them functions in operating bands for example of two different telecommunication standards. In the circuit of phase shifter, where the differential phase shift is provided by the switching of channels of passing the signal the parameters of switching elements do not determine this shift unlike the other well-known circuits. However in case of bad matching and isolation of switches the frequency bands are narrowed, the losses and imbalance of amplitudes in two states are grown. The dual-frequency matching and isolation are reached in the SPMT switch by means of impedance transformers which can be located on the input of switch before branching, or in channels after the switching elements before outputs. The methods of calculation of such dual-frequency transformers based on the asymmetrical one-stub circuit and the symmetrical two-stub circuit, and also the methods of calculation of circuits which are needed for realization of reactance with the appropriate values at two operating frequencies is offered. The calculation and simulation of the SPDT switch for use as a part of the phase shifter with operating frequencies of 2,4/5,2 GHz was executed by these methods. For obtaining of arbitrary difference phase shift at two frequencies the replacement of line segments in channels of phase shifter by the dual-frequency equivalent circuits is carried out. The method of calculation of such P-type circuit for replacement of a segment with different values of characteristic impedance and electrical length at operating frequencies is offered. The offered approach was investigated on examples of calculation and simulation of the dual-frequency phase shifters with identical 450/450 and distinct 450/900 differential phase shifts at operating frequencies 2,4/5,2 GHz and with shifts 450/–450 at frequencies 0,95/2,15 GHz.Item Дослідження ширини робочого сектора безпошукового цифрового кореляційно-інтерферометричного пеленгатора з реконструюванням просторового аналітичного сигналу(Видавництво Львівської політехніки, 2016) Ципоренко, В. В.Виконано дослідження ширини робочого сектора та точності пеленгування безпошукового цифрового кореляційно-інтерферометричного пеленгатора, що використовує реконструювання просторового аналітичного сигналу. Запропоновано методи розширення робочого сектора пеленгування з використанням реконструювання просторового комплексного сигналу. It was conducted the research of the width of the working sector and the exactness of direct digital correlative-interferometric direction finder that uses reconstruction of spatial analytical signal. It is shown that the main operation that has a basic effect on the width of the working sector of the direction finder is the parallel two-dimensional filtration of the radiation with using of algorithm of fast Fourier transform (FFT). Two-dimensional filtration of the radiation should be carried out in frequency-spatial field of determination with using of two-step fast reconstruction of harmonic components of radio emission. At first stage the parallel frequency filtration of the radiation is implemented in direction finding channels on an intermediate frequency using fast Fourier transform algorithm, followed by rapid reconstruction of selected radiation in the time domain. At second stage the parallel spatial filtration is implemented using a digital synthesis of the multidirected directional pattern, which blocks the working sector of direction finding. It was determined that the width of working sector of direction finding is limited by parasitic distortions in the synthesis of the multidirected directional pattern and depends on the type of weight function of digital pattern formation ("window"), aperture size and number of elements of linear antenna lattice. It was conducted the research of the methods of rapid reconstruction of radio emission in their frequency filtration using real and complex forms of signal representation and its impact on the width of the working sector of direction finding. It was shown the expediency of using of complex reconstructed radiation implementations. The proposed method of expansion of the working sector of direction finding that uses reconstruction of spatial complex analytical signal provides the wider [15–165] degrees sector of direction finding and significantly simplifies direction finding algorithm.Item Адаптивний алгоритм виявлення рухомих об’єктів під час відеомоніторингу(Видавництво Львівської політехніки, 2016) Гривачевський, А. П.; Прудиус, І. Н.На основі аналізу наявних методів виявлення рухомих об’єктів запропоновано адаптивний до дестабілізувальних факторів алгоритм виявлення, що ґрунтується на паралельному використанні двох методів: методу віднімання фону та методу міжкадрової різниці, а також представлено результати його моделювання. Статистична оцінка параметрів, що виконується в процесі навчання алгоритму, дозволяє використовувати цей алгоритм без налаштування його параметрів практично з будьякою відеокамерою незалежно від рівня її власних шумів. У результаті роботи запропонованого алгоритму досягається ефективне виділення рухомих об’єктів у їх природних кольорах без малоінформативного фону. Використання цього алгоритму, наприклад, в системах відеоспостереження, дасть змогу спростити сприйняття інформації та зменшити психологічне навантаження оператора. The paper based on the analysis of existing methods of detecting moving objects offer combined detection algorithm that adapts to such destabilizing factors as: the noise of the equipment (photoelectron matrix converter, amplifier, analog-to-digital converter), change lighting scenes, change the background. The essence of the proposed algorithm is used two parallel detection methods: the method of background subtraction and frame difference method, which allows the algorithm to work effectively in cases of dynamic background. Statistical evaluation of parameters of the model background, which is performed in the process of learning algorithm for each pixel of the video frame in order to determine the optimal threshold binarization algorithm enables this without setting its parameters with just about any camera, regardless of the level of intrinsic noise eyo, which each camera is different. To increase the efficiency of detection of moving objects in the final stage of the algorithm is filtered binary mask by applying morphological operations to remove wrongly marked pixels and combining pixel marked correctly in the objects. The results of the simulation of information processing in the systemof video monitoring of mobile objects on a real video signal. As a result of the proposed algorithm is achieved by efficient allocation of moving objects in their natural colors without uninformative background. Using this algorithm, for example, in video surveillance systems, will significantly reduce the amount of data that will be stored in the video archive and will simplify the perception of information by the operator and reduce its psychological burden. The results of the algorithm in the future can be used for high-level analysis of mobile objects, in particular, identifying objects and determining their trajectories.Item Метод контролю якості обробки інформаційних потоків у мережі 5G(Видавництво Львівської політехніки, 2016) Скулиш, М. А.; Заставенко, А. А.Розглянуто проблеми функціонування систем забезпечення якості у мережах п’ятого покоління. Розроблено метод контролю якості передавання відеопотоків у мережах п’ятого покоління на основі технології Smart Grid, який враховує вимоги до якості передавання відео у телекомунікаційному середовищі та використовує досягнення у процесі контролю якості передавання цифрового телебачення. The problems of functioning of quality assurance systems in the 5th generation mobile networks are discussed. The method of quality control of transmission of video streams in the 5th generation networks based Smart Grid, which takes into account the quality requirements for video transmission in the telecommunications environment and uses advances in process quality control transmission of digital television is presented.Item Відображення впливу морфології на характеристики електронних пристроїв(Видавництво Львівської політехніки, 2016) Кудря, В. Г.Запропоновано методи поліпшення якості аналізу електронних пристроїв. Використання елементів теорії електромагнітного поля та теорії електричних кіл у межах системного дослідження дало змогу об’єднати схемотехнічне та конструктивно-технологічне проектування електронних систем та їх компонентів. Для ілюстрації запропонованого підходу вибрана схема підсилювача. Представлена модель відтворює конструктивні особливості друкованої плати у вигляді електродинамічних параметрів конструкції. Параметри моделі аналізуються в межах квазістаціонарного наближення електромагнітних взаємовпливів міжкомпонентних з’єднань провідникових структур. Застосування принципу аналогії сферопаралельних та площинно-паралельних полів дозволило визначити потоки вектора електричної індукції як різниці скалярних потенціалів, тобто без застосування числового інтегрування по поверхнях провідників міжкомпонентних з’єднань, що значно зменшує обчислювальну складність. Запропонована модель встановлює алгоритмічний зв’язок конструкцій друкованих плат з системними: часовими, частотними, завадостійкими та іншими схемотехнічними характеристиками об’єкта проектування. The article suggests methods for improving the quality of analysis of electronic devices. Using the electromagnetic field theory and the theory of electrical circuits within the system allowed to combine research and schematic structural and technological design of electronic systems and their components. To illustrate the proposed approach chosen amplifier circuit. The model reproduces the design features of the PCB in the form of electromagnetic design parameters. Parameters of the model are analyzed under quasistationary approximation electromagnetic interferences between component connections conductor structures. Application of the principle of analogy between spherical and planar parallel field allowed to determine the flow of electric displacement field as scalar potential difference, that is, without the use of numerical integration on the surface of conductors between component connections, which greatly simplifies the computational complexity. The model establishes a relationship algorithmic designs PCB with the system: time; frequency; noiseimmunity circuit and other features of the design.Item Метод підвищення енергетичної ефективності HQPSK сигналів(Видавництво Національного університету "Львівська політехніка", 2016) Бондарєв, А. П.; Максимів, І. П.; Максимюк, Т. А.Показано можливість зростання енергетичної ефективності систем коміркового зв’язку за рахунок зменшення порогового відношення сигнал/шум за заданої частоти появи бітової помилки, з використанням особливого типу квадратурної фазової модуляції (HQPSK) і модифікованого фазового детектора. Обидва методи мають і переваги, і недоліки. Комбінація цих двох методів теоретично може зменшити їх недоліки, роблячи їх вигіднішими, ніж наявні методи. With the development of cellular communications, the different problems of effective spectrum utilization to provide a high quality of service for large number of mobile users have been emerged. For the last years the development of wireless communications became a large scale, inducing developers of radiotechnic devices to find new solutions to the problem of effective utilization of the allocated spectrum and effective power maintenance. Many types of spectral-efficient modulation of radio signals and new protocols that enable efficient distribution of network traffic have been proposed so far. One of the key parameters that are used for channel efficiency estimation is signal-to-noise ratio (SNR): the higher SNR results in lower bit-error rate and vice versa. Dependence between bit-error rate and signal-to-noise ratio is the key characteristic of the communication channel and optimization of this characteristic is an important task for communication networks. This paper shows the possibility of reducing the signal-to-noise ratio while maintaining the required bit-error rate by using specific type of quadrature phase shift keying (HQPSK) complemented by modified phase detector. Both methods have their advantages and disadvantages. The combination of these two methods can theoretically reduce their cons while effectively exploiting their advantages. The feature of the first method lies in power saving approach, providing the use of only one quadrature component during signal modulation, while the second quadrature component is coded using additional frequency subcarriers. The second method allows detection of quadrature signals at high noise power condition. This benefit is achieved by implementation of specific narrowband filters into phase detector.Item Кристалічна структура змішаних феритів рідкісноземельних елементів Pr0,5R0,5FeO3 (R = Nd, Gd, Tb, Dy, Ho)(Видавництво Львівської політехніки, 2016) Павловська, О. Б.; Василечко, Л. О.У роботі досліджено фазовий склад та кристалічну структуру нових змішаних феритів рідкісноземельних елементів Pr0,5R0,5FeO3 (R = Nd, Gd, Tb, Dy, Ho), отриманих методом твердофазного синтезу. Встановлено, що всі синтезовані зразки мають ромбічну структуру перовськіту типу GdFeO3. Структурні параметри змішаних феритів РЗЕ, отримані повнопрофільним методом Рітвельда, добре узгоджуються з даними для “чистих” сполук PrFeO3 та RFeO3, що вказує на можливість утворення безперервних твердих розчинів Pr1-xRxFeO3 у системах PrFeO3 – RFeO3 (R = Nd, Gd, Tb, Dy, Ho). The work deals with the study of the phase composition and crystal structure of new mixed ferrites Pr0,5R0,5FeO3 (R = Nd, Gd, Tb, Dy, Ho) obtained by solid state reactions technique. It was established that all samples synthesized adopt orthorhombic perovskite structure isotypic with GdFeO3. Unit cell dimensions and atomic coordinates of the mixed rare earth ferrites derived by full profile Rietveld refinement technique agree well with the data of the “pure” PrFeO3 and RFeO3 compounds, thus proving formation of continuous solid solutions Pr1-xRxFeO3 in the PrFeO3 –RFeO3 systems (R = Nd, Gd, Tb, Dy, Ho).Item Дослідження принципів побудови транспортних мереж на основі технології OLS(Видавництво Львівської політехніки, 2016) Кайдан, М. В.; Андрущак, В. С.; Думич, С. С.; Пашкевич, В. З.Викладено основні принципи роботи транспортної технології OLS. Особливу увагу зосереджено на двох режимах передавання даних – коли корисне навантаження передається з пакетом-заголовком (міткою) у спільних або різних оптичних каналах. Досліджено основні проблеми розвитку технології OLS і встановлено, що одним із вузьких місць цієї технології є використання оптичних буферів. Крім того, існують проблеми визначення розміру транспортного модуля технології OLS, синхронізації транспортного модуля і мітки, архітектури проміжного вузла такої оптичної транспортної мережі. Unified network platform to support voice, data and multimedia applications is attractive for optical level. Optical packet switching (OPS) provides a platform where the only transport data unit for all type of traffic will be package. On the other hand, quality of service (QoS), class of service (CoS) and the type of service (ToS) required for the future of the Internet more elaborated and more powerful control plane. Optical switching labels (OLS) supports OPS, optical flow switching (OFS) and optical burst switching (OBS) with full interoperability of QoS, CoS and ToS. In paper presented basic principles of the technology OLS where attention was focused on the rules of processing optical labels. Described in detail the principles of data transmission in optical transport networks with technology OLS, namely data transmission modes where the payload with label are transmitted in common and different optical channels. Investigated bottlenecks of each mode of data transmission, where established that one such place is the using of optical buffers in intermediate nodes. Presented the simplified structure of the intermediate node for optical transport network technology OLS. Particular attention in the modes of data transmission was focused the rules of transfer labels between boundary nodes, calculation time between payload and label, data processing at intermediate nodes and the implementation of optical switching. Considered data transfer mode where unnecessary use of optical buffers. Special attention is focused on the existing problems of technology OLS, such as determining the size of the transport data unit, content and size of the packet-header (label), the high cost of accurate optical buffers, absence of algorithms for accurate synchronization label and transport data unit, design architecture intermediate node and optical switch.Item Символьна модель квадратурного детектора(Видавництво Львівської політехніки, 2016) Маньковський, С. В.; Маньковська, Е. Й.Запропоновано символьну модель квадратурного детектора. В запропонованій моделі вихідний сигнал представляється у вигляді матриці, яка містить параметри частотних складових вихідного сигналу, зокрема частоту, амплітуду та фазу. Запропонована модель корисна для розв’язання задач аналізу, оптимізації та синтезу. Quadrature detectors (QD) are widely used in a radioelectronic devices as alternative to the synchronous detectors. There are many applications where there is necessary to measure the amplitude of input signal with specified frequency, but unknown or variable phase. For such cases the quadrature detectors are often used. The key advantage of quadrature detectors is that output signal is invariant to the phase of the input signal. This paper is devoted to the symbolic model of the quadrature detector. The output signal is represented as a matrix contains the parameters of this signal frequency components (frequencies, amplitudes and phases). Proposed model is useful for analysis, optimization and statistical problems. Proposed symbolic model of quadrature detector allows to obtain symbolic model once per given quadrature detector architecture and use this model many times for solving a lot of engineering problems like optimization or statistical analysis. The symbolic model can be used for quick output signal calculation. To do this the corresponding numerical values should be substituted instead of symbolic parameters. The restriction of proposed model is that it allows to build the symbolic model in the frequency domain for all blocks of quadrature detector except SQRT block. But this model allows easily calculate SQRT output signal in time domain. To do this the matrix representation of SQRT input signal is converted to the time domain signal according to the given in paper equation and square root can be easily calculated. The drawback of proposed model is that the case of complicated input signal, which contains a lot of frequency components, causes to the symbolic model complexity increase due the order of matrix model increase proportionally to the number of frequency components in the input signal.Item Ряди Вольтерри для моделей Ходжкіна–Хакслі та ФітцХ’ю-Нагумо нейрона(Видавництво Львівської політехніки, 2016) Романишин, Ю. М.; Петрицька, С. Р.Розглянуто представлення моделей Ходжкіна–Хакслі та ФітцХ’ю–Нагумо нейрона рядами Вольтерри та особливості обчислення ядер Вольтерри для цих моделей. Отримано системи лінійних алгебраїчних рівнянь для спектрів ядер Вольтерри та їх розв’язки. Для реалізації оберненого перетворення Фур’є використано пакет прикладних програм Symbolic Math Toolbox системи MATLAB. Наведено графіки модуля спектра та ядра першого порядку ряду Вольтерри для обох моделей нейрона. The peculiarity of Volterra series use as to comparison with classical models of nonlinear dynamical systems in the form of nonlinear differential equations is that Volterra series directly evaluates output signal of the system by multidimensional convolution of input signal. Kernels of Volterra series can be considered as generalization of impulse response of linear systems to nonlinear ones. The choice of certain components of Volterra series enables to take into account nonlinear peculiarities of different orders. The representation of Hodgkin-Huxley and FitzHugh-Nagumo models of neuron by Volterra series and features of calculation of Volterra kernels for these neuron models are considered. The systems of nonlinear differential equations of the first order in the form of Cauchy of Hodgkin-Huxley and FitzHugh-Nagumo neuron models with continuous analytical functions at the right side of equations give the possibility to reduce the problem of determination Volterra kernels to solving of algebraic equations systems, which are represented in analytical form. For the determination of Volterra kernels the conversion into frequency domain by integral Fourier transform is used. For the Hodgkin-Huxley model the multiple Maclaurin series expansions of the functions at the right side of system of differential equations are used, for the FitzHugh-Nagumo model the expressions at the right side of equations are polynomial. The systems of four (for Hodgkin-Huxley model) and two (for FitzHugh-Nagumo model) linear algebraic equations for spectra of Volterra kernels and their solutions are obtained. Symbolic Math Toolbox of MATLAB system for inverse Fourier transforms is used. Diagrams of spectrum module and first order kernel of Volterra series are given for both neuron models. Constructed Volterra series models can be used for research of dynamic properties of neural networks with Hodgkin-Huxley and FitzHugh-Nagumo models of neuron using.