Вісники та науково-технічні збірники, журнали
Permanent URI for this communityhttps://ena.lpnu.ua/handle/ntb/12
Browse
Search Results
Item Structural and kinematic synthesis of the 1-Dof eight-bar walking mechanism with revolute kinematic pairs(Lviv Politechnic Publishing House, 2017-10-19) Korendiy, Vitaliy; Lviv Polytechnic National UniversityProblem statement. The use of existing and the most widespread drives (wheeled and caterpillar one) is sometimes limited by complicated operational conditions while moving on rough terrain. The mentioned drives require a relatively flat surface to be operated effectively. A rocky or a hilly terrain imposes the demand of the use of alternative types of drives, in particular, walking ones. Purpose. In this paper, there will be proposed and analysed one of the possible structures of the walking mechanism for mobile robotic system to be used on rough terrain. Methodology. While carrying out the investigations, the structural and kinematic synthesis of the eight-bar hinge-lever walking mechanism has been performed using the well-known methods of the Theory of Machines and Mechanisms, in particular, the method of closed vector loops. In order to conduct experimental investigations and simulation of the mechanism motion, the applied software SolidWorks and MapleSim has been used. Findings (results). The structure and geometrical parameters of the eight-bar walking mechanism have been synthesized with the aim to ensure the required trajectory and kinematic characteristics of the supporting foot motion. Originality (novelty). The analytical dependencies describing the trajectory of each hinge of the analysed walking mechanism have been derived and the kinematic optimization synthesis problem has been solved. This allowed to substantiate of the mechanism’s geometrical parameters and to analyse its kinematic characteristics. Practical value. The proposed structure of the walking mechanism can be effectively used in various mobile robotic systems and in transporting and technological machines in order to ensure the possibility of their use on rough terrain where there is no ability to use wheeled and caterpillar drives. Scopes of further investigations. While carrying out further research, it is necessary to analyse the influence of the weight coefficients on the solution of the optimization problem, as well as to take into account the necessity of changing the step length and the foot lifting height during the process of walking according to the surface obstacles sizes.Item Optimization of structure of sorting vibratory separators(Lviv Politechnic Publishing House, 2017-01-01) Shenbor, Vladyslav; Korendiy, Vitaliy; Brusentsov, Volodymyr; Lviv Polytechnic National University, Lviv, UkraineThe problem of substantiation of operational efficiency of vibratory separators designed on the basis of vibratory hopper feeders with electromagnetic vibrations exciters and with conic working bowls is considered in the article. The complex of factors influencing the accuracy and productiveness of separation of coins and disk-shaped products on two or more fractions is overviewed. New models of structures for the effective solution of separation problems are proposed. The design of a highly-efficient and high-performance separator with independent oscillations disturbance is described. The results of experimental investigations of vibratory transportation in elliptical modes of vibrations and of the study of separation efficiency are presented. The recommendations that developers and researchers of such devices may use are given.