Вісники та науково-технічні збірники, журнали
Permanent URI for this communityhttps://ena.lpnu.ua/handle/ntb/12
Browse
3 results
Search Results
Item Features of repair welding of power hydrocylinder elements(Lviv Politechnic Publishing House, 2020) Dzyubyk, Andrij; Nazar, Ihor; Dzyubyk , Liudmyla; Lviv Polytechnic National UniversityAt present, the use of power hydraulic cylinders is an integral part of most industrial equipment. They provide translational and horizontal movements, replacement of goods, fixation, etc. These devices are necessary elements of the equipment where application of the corresponding level of effort is applied. Often hydraulic cylinders are created specialized to perform certain types of work. It should be noted that part of the elements of the power cylinder in the manufacture is combined with welding. Such integral connections provide rigidity of installation, tightness of a design, fatigue strength at multicycle loadings. Difficult operating conditions, significant workloads, the presence of various external factors often leads to the destruction of individual elements of the cylinder. At the same time, the cost of repairing equipment that involves replacement with new power devices is quite high. This causes the implementation of repair and restoration work carried out at specialized enterprises. However, in the case of repairs, there are often a number of problems that require prompt resolution in the production environment. These should include the provision of basic materials with similar physical and chemical properties, the establishment of welding modes, the selection of the necessary welding materials, the use of appropriate techniques for conducting the arc process, etc. Therefore the repaired welded design of the case of the power hydraulic cylinder needs additional studying for weldability of separate elements among themselves, formation of a zone of thermodeformation influence. In general, the repaired hydraulic cylinder should meet the installation operating requirements depending on the purpose. The design of the considered hydraulic cylinder of the press installation is rather technological from the point of view of maintenance of automation of welding process. It contains long welds of a simple ring configuration. At the same time, the significant linear dimensions and the presence of a cylindrical surface cause some complexity in the implementation of processes. The construction material of the power hydraulic cylinder is low-carbon low-alloy steels. The analysis of technological weldability indicates a tendency to crack due to the thermal cycle of welding. The simulation of welds of the power hydraulic cylinder is performed in the work. The number of rollers was taken into account when obtaining butt welds. A compa ative analysis of different electrode materials with different doping systems is done. The most applicable welding materials by chemical composition and properties of the weld metal are determined. According to the literature data and the results of comparative analysis, the optimal range of cooling rate of the main material of the hydraulic cylinder was established. The properties and structure of the zone of thermal influence of the butt welds of the power hydraulic cylinder have been studied. The magnitude of deformations and stresses caused by the thermal cycle of welding of the hell structure of the hydraulic cylinder liner is investigated. The admissible parameters of the zone of plastic deformations during butt welding are determined.Item Comprehensive approach to training specialists in the area of engineering education(Lviv Politechnic Publishing House, 2020) Dzyubyk, Andrij; Nazar, Ihor; Dzyubyk, Liudmyla; Mykhailinchyk, Ihor; Kulykovets, Yurii; Lviv Polytechnic National UniversityThe article outlines advantages of applying a comprehensive approach to training specialists in the area of engineering education. Modern approaches to project management in production are analyzed, using the known experience of the European countries and the world. The basic tools of project management that are applied at all stages of implementation of engineering projects are described. Based on the analysis of known project management techniques, it has been established that effective engineering project management is possible by way of involving future professionals in the stages from developing the project idea, goals and objectives to obtaining the desired results and achieving the set goals. It is important to motivate students to think critically and encourage teamwork on a project. In the present article, the authors suggest to consider the process of training specialists in civil and industrial engineering through the prism of the next four phases of the project. The first phase is to prepare the project with elements of structuring. It addresses the issues of the project goals, tasks and results, risk management, project documentation, budgeting, formation and management of the project team. The second phase is project management, which includes drafting a project structural plan (PSP) and work packages, scheduling task completion, resources and costs planning, cost estimation, and time management tools. The third phase is the implementation of the project with control and monitoring. Here, future specialists are working on issues of the project control, financial monitoring, monitoring of resources, communication and interaction between teams, conflict management, change management and keeping necessary documentation. Completion of the project is the fourth stage, which is an integral element of project management. It provides for financial and analytical reporting, documentation for retention of experience, knowledge management, certification and feedback to the project team. Based on teaching practice and considerable practical experience in industry, the authors found out that the process of pedagogical training of future competitive specialists in various areas of civil and industrial engineering should be accompanied by practical and theoretical materials on modern tools for a holistic and integrated approach to project management. At the same time, taking account of the dynamics of political and economic changes in Ukraine and integration with international standards, it is necessary to take a skilled approach to the issue of production change management in the project activity. The global experience reveals that only truly successful organizations anticipate and initiate changes. Thus, the organizations themselves, their goals, objectives and tools are undergoing changes. And the issue of change management itself is the subject for further research by the authors.Item Determination of stresses and ultimate loads for composite plates with elastic inclusions(Lviv Politechnic Publishing House, 2017-10-19) Jaroszewicz, Jerzy; Maksymovych, Olesya; Dzyubyk, Andrii; Nazar, Ihor; Bialystok University of Technology; Lviv Polytechnic National UniversityIn the article, the algorithm for determination of stresses in anisotropic plates with elastic inclusions of another anisotropic material was developed on the basis of complex singular integral equations. The solving of integral equations has been carried out numerically using the method of mechanical quadratures. The strength analysis (calculation of strength) of composite plates with inclusions has been performed using the Hoffman criterion.