Statement and solution of non-stationary problem of liquid filtering in a deformed porous medium
No Thumbnail Available
Date
2019
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Lviv Politechnic Publishing House
Abstract
The paper discusses the laws behind the filtering procedures of process liquids through porous materials. At metalwork finishing operations, the use of cutting fluids is of particular importance. During operation, liquids are continuously and intensively contaminated with solid metal parts. To restore the original properties, process fluids are cleaned of mechanical admixtures. The most widely used methods for purifying process liquids are those by filtration. The use of
filtration for the purification of process fluids is most effective, since filtering through a layer of porous materials results in complete extraction and removal of solids from liquids. However, the structural features of the pores in the porous environment trigger a number of specific phenomena that arise when liquids move in the porous channels of a porous medium. The research purpose is to discuss and establish the laws behind the filtering procedures of process fluids through porous materials. When filtering process liquids through a layer of porous materials, the porous medium of the filter membrane expands with a change in porosity. The change in porosity occurs due to a decrease in the pore volume of the porous environment, since the solid parts together with the liquid penetrate into the porous channels of the porous environment and hover in them. The conducted studies permitted the authors to identify and study the laws of the filtering process and establish the law of change in porosity of the porous environment. Based on the established law, a differential equation is derived. It allowed, for given initial and border-line conditions, stating the problem of filtering the liquid through a layer of solid particles of a variable porous medium of the filtering membrane. The solution of the non-stationary problem with initial and border-line conditions by the finite difference method allowed determining the hydrodynamic parameters of fluid filtration through a layer of particles of the porous environment of the filter membrane and to obtain a solution of the non-stationary boundary problem of fluid filtration in a deformed porous medium. The use of research results promotes complete clarification of the process fluid and thorough removal of the solid parts of valuable secondary raw materials of metal processing, in particular for powder metallurgy, facilitates the launching of waste-free production, and increases the level of environmental cleanliness in the operating area of cutting fluids.
Description
Keywords
lubricoolants, solid parts, filtration, porous materials
Citation
Molchanov V. Statement and solution of non-stationary problem of liquid filtering in a deformed porous medium / Vitalii Molchanov // Ukrainian Journal of Mechanical Engineering and Materials Science. – Lviv : Lviv Politechnic Publishing House, 2019. – Volume 5, № 3/4. – P. 1–7. – Bibliography: 12 titles.