Analysis of parts machining by cutting using approaches of reliability engineering

Simple item page
dc.citation.epage43
dc.citation.issue2
dc.citation.journalTitleУкраїнський журнал із машинобудування і матеріалознавства
dc.citation.spage36
dc.contributor.affiliationLviv Polytechnic National University
dc.contributor.affiliationUniversity of Brescia
dc.contributor.authorKusyi, Yaroslav
dc.contributor.authorBrukhal, Pavlo
dc.contributor.authorKonyukh, Oleg
dc.contributor.authorCocca, Paola
dc.coverage.placenameЛьвів
dc.date.accessioned2025-11-18T11:50:42Z
dc.date.created2025-02-27
dc.date.issued2025-02-27
dc.description.abstractDigitalization of important processes related to parts machining and product manufacturing requires searching for new approaches and techniques for technological process planning during product manufacturing. Product life cycle is prioritized in scientific research in manufacturing engineering, and materials sciences. Object-oriented and functionally-oriented technologies are used for technological process planning at product manufacturing for current manufacturing engineering. Object-oriented technologies characterized by step-by-step execution of interrelated activities based on the prototyping sequence are used in conventional automated systems of design and technological preparation of manufacturing products. A characteristic feature of smart manufacturing, as the highest level of functionallyoriented technologies, is the technological assurance of reliability metrics, operational characteristics, and sustainable development goals at product manufacture by the main requirements of Industry 4.0/5.0. Nowadays, the prediction of products’ behaviour during their life cycles is an important task of current manufacturing engineering. Reliability engineering, as a combination of physics, statistics, and engineering, allows for analysing the product behaviour for different production processes in different operational conditions. A technique for analysing the influence of technological system elements for parts machining by cutting on technological assurance of the product quality using Markov chains is developed. The influence of a metal-cutting machine, a metal-cutting tool, and a fixture (clamping device) providing the regulated product quality of the machined product is calculated. Further research in this direction should be carried out according to a comprehensive analysis of different machining methods and a wider range of components, because it is necessary to study the change in reliability parameters with different operating times of the technological system elements.
dc.format.extent36-43
dc.format.pages8
dc.identifier.citationAnalysis of parts machining by cutting using approaches of reliability engineering / Yaroslav Kusyi, Pavlo Brukhal, Oleg Konyukh, Paola Cocca // Ukrainian Journal of Mechanical Engineering and Materials Science. — Lviv Politechnic Publishing House, 2025. — Vol 11. — No 2. — P. 36–43.
dc.identifier.citationenAnalysis of parts machining by cutting using approaches of reliability engineering / Yaroslav Kusyi, Pavlo Brukhal, Oleg Konyukh, Paola Cocca // Ukrainian Journal of Mechanical Engineering and Materials Science. — Lviv Politechnic Publishing House, 2025. — Vol 11. — No 2. — P. 36–43.
dc.identifier.doidoi.org/10.23939/ujmems2025.02.036
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/120183
dc.language.isoen
dc.publisherВидавництво Львівської політехніки
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofУкраїнський журнал із машинобудування і матеріалознавства, 2 (11), 2025
dc.relation.ispartofUkrainian Journal of Mechanical Engineering and Materials Science, 2 (11), 2025
dc.relation.references[1] J. P. Davim, Sustainable Machining. Materials Forming, Machining and Tribology. Cham, Switzerland, 2017.
dc.relation.references[2] K. P. Tran, Artificial Intelligence for Safety and Reliability Engineering. Methods, Applications, and Challenges, Springer, Cham, Switzerland, 2024.
dc.relation.references[3] V. Stupnytskyy and I. Hrytsay, "Simulation study of cutting-induced residual stress", In Advances in Design, Simulation and Manufacturing II: Proceedings of the 2nd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2019, June 11-14, 2019, Lutsk, Ukraine Springer International Publishing, pp. 341-350, 2020. DOI:10.1007/978-3-030-22365-6_34
dc.relation.references[4] K. K. Wang and V. W. Wang, "Computer-aided mold design and manufacturing", Injection and Compression Molding Fundamentals, pp. 607-669, 2017. DOI:10.1201/9780203750810-9
dc.relation.references[5] Y. Kusyi, V. Stupnytskyy, O. Onysko, E. Dragašius, S. Baskutis, and R. Chatys, "Optimization synthesis of technological parameters during manufacturing of the parts", Eksploatacja i Niezawodnosc - Maintenance and Reliability, vol. 24, no. 4, pp. 655-667, 2022. DOI: http://doi.org/10.17531/ ein.2022.4.6
dc.relation.references[6] V. Stupnytskyy, E. Dragašius, S. Baskutis and S. Xianning, "Modeling and simulation of machined surface layer microgeometry parameters", Ukrainian Journal of Mechanical Engineering and Materials Science, vol. 8, no. 1, pp. 1-11, 2022. DOI:10.23939/ujmems2022.01.001
dc.relation.references[7] T. Altan, B. Lilly, and Y. C. Yen, "Manufacturing of dies and molds", CIRP Annals, vol. 50, no. 2, pp.404- 422, 2001. DOI:10.1016/S0007-8506(07)62988-6
dc.relation.references[8] K.B. Akhilesh and D. Möller, Smart Technologies. Scope and Aplications, Springer Nature, Singapore, Pte Ltd, 2020.
dc.relation.references[9] F. Psarommatis and V. Azamfireic, "Zero Defect Manufacturing: A complete guide for advanced and sustainable quality management", Journal of Manufacturing Systems, vol. 77, pp. 764-779, 2024. DOI: 10.1016/j.jmsy.2024.10.022.
dc.relation.references[10] F. Psarommatis and G. Bravos, "A holistic approach for achieving Sustainable manufacturing using Zero Defect Manufacturing: a conceptual Framework", Procedia CIRP, vol. 107, pp. 107-112, 2022. DOI: 10.1016/J. PROCIR.2022.04.018
dc.relation.references[11] F. Nagashima, Y. Nakagawa, and M. Yoshino, "Numerical analysis of subgrain formation during metal cutting and rolling based on the crystal plasticity theory", International Journal of Material Forming, vol. 15, no. 9, 2022. DOI:10.1007/s12289-022-01652-0
dc.relation.references[12] Y. Kusyi, O. Kostiuk, A. Kuk, A. Attanasio, and P. Cocca, "Optimization of Cutting Modes During Sustainable Machining of Products Based on Economic Criteria". In: Tonkonogyi, V., Ivanov, V., Trojanowska, J., Oborskyi, G., Pavlenko, I. (eds) Advanced Manufacturing Processes V. InterPartner 2023. Lecture Notes in Mechanical Engineering. Springer, Cham, 2024. DOI: 10.1007/978-3-031-42778-7_16
dc.relation.referencesen[1] J. P. Davim, Sustainable Machining. Materials Forming, Machining and Tribology. Cham, Switzerland, 2017.
dc.relation.referencesen[2] K. P. Tran, Artificial Intelligence for Safety and Reliability Engineering. Methods, Applications, and Challenges, Springer, Cham, Switzerland, 2024.
dc.relation.referencesen[3] V. Stupnytskyy and I. Hrytsay, "Simulation study of cutting-induced residual stress", In Advances in Design, Simulation and Manufacturing II: Proceedings of the 2nd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2019, June 11-14, 2019, Lutsk, Ukraine Springer International Publishing, pp. 341-350, 2020. DOI:10.1007/978-3-030-22365-6_34
dc.relation.referencesen[4] K. K. Wang and V. W. Wang, "Computer-aided mold design and manufacturing", Injection and Compression Molding Fundamentals, pp. 607-669, 2017. DOI:10.1201/9780203750810-9
dc.relation.referencesen[5] Y. Kusyi, V. Stupnytskyy, O. Onysko, E. Dragašius, S. Baskutis, and R. Chatys, "Optimization synthesis of technological parameters during manufacturing of the parts", Eksploatacja i Niezawodnosc - Maintenance and Reliability, vol. 24, no. 4, pp. 655-667, 2022. DOI: http://doi.org/10.17531/ ein.2022.4.6
dc.relation.referencesen[6] V. Stupnytskyy, E. Dragašius, S. Baskutis and S. Xianning, "Modeling and simulation of machined surface layer microgeometry parameters", Ukrainian Journal of Mechanical Engineering and Materials Science, vol. 8, no. 1, pp. 1-11, 2022. DOI:10.23939/ujmems2022.01.001
dc.relation.referencesen[7] T. Altan, B. Lilly, and Y. C. Yen, "Manufacturing of dies and molds", CIRP Annals, vol. 50, no. 2, pp.404- 422, 2001. DOI:10.1016/S0007-8506(07)62988-6
dc.relation.referencesen[8] K.B. Akhilesh and D. Möller, Smart Technologies. Scope and Aplications, Springer Nature, Singapore, Pte Ltd, 2020.
dc.relation.referencesen[9] F. Psarommatis and V. Azamfireic, "Zero Defect Manufacturing: A complete guide for advanced and sustainable quality management", Journal of Manufacturing Systems, vol. 77, pp. 764-779, 2024. DOI: 10.1016/j.jmsy.2024.10.022.
dc.relation.referencesen[10] F. Psarommatis and G. Bravos, "A holistic approach for achieving Sustainable manufacturing using Zero Defect Manufacturing: a conceptual Framework", Procedia CIRP, vol. 107, pp. 107-112, 2022. DOI: 10.1016/J. PROCIR.2022.04.018
dc.relation.referencesen[11] F. Nagashima, Y. Nakagawa, and M. Yoshino, "Numerical analysis of subgrain formation during metal cutting and rolling based on the crystal plasticity theory", International Journal of Material Forming, vol. 15, no. 9, 2022. DOI:10.1007/s12289-022-01652-0
dc.relation.referencesen[12] Y. Kusyi, O. Kostiuk, A. Kuk, A. Attanasio, and P. Cocca, "Optimization of Cutting Modes During Sustainable Machining of Products Based on Economic Criteria". In: Tonkonogyi, V., Ivanov, V., Trojanowska, J., Oborskyi, G., Pavlenko, I. (eds) Advanced Manufacturing Processes V. InterPartner 2023. Lecture Notes in Mechanical Engineering. Springer, Cham, 2024. DOI: 10.1007/978-3-031-42778-7_16
dc.relation.urihttp://doi.org/10.17531/
dc.rights.holder© Національний університет “Львівська політехніка”, 2025
dc.rights.holder© Kusyi Y., Brukhal P., Konyukh O., Cocca P., 2025
dc.subjectsustainable manufacturing
dc.subjectsustainable machining
dc.subjectreliability engineering
dc.subjectMarkov chains
dc.subjecttechnological system
dc.subjecttechnological medium
dc.titleAnalysis of parts machining by cutting using approaches of reliability engineering
dc.typeArticle

Files

Original bundle

Now showing 1 - 2 of 2
Thumbnail Image
Name:
2025v11n2_Kusyi_Y-Analysis_of_parts_machining_36-43.pdf
Size:
402.09 KB
Format:
Adobe Portable Document Format
Download
Thumbnail Image
Name:
2025v11n2_Kusyi_Y-Analysis_of_parts_machining_36-43__COVER.png
Size:
1.17 MB
Format:
Portable Network Graphics
Download

License bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.78 KB
Format:
Plain Text
Description:
Download

Collections

Ukrainian Journal of Mechanical Engineering and Materials Science. – 2025. – Vol. 11, No. 2