Interaction of the flow of flushing fluid with the drill pipes and the wall of the well

Simple item page
dc.citation.epage14
dc.citation.issue2
dc.citation.journalTitleУкраїнський журнал із машинобудування і матеріалознавства
dc.citation.spage1
dc.contributor.affiliationLviv Polytechnic National University
dc.contributor.authorKharchenko, Yevhen
dc.contributor.authorButrynskyi, Dmytro
dc.coverage.placenameЛьвів
dc.coverage.placenameLviv
dc.date.accessioned2025-11-14T08:00:53Z
dc.date.created2024-02-27
dc.date.issued2024-02-27
dc.description.abstractThe steady-state flow of flushing fluid in the annular space of a drill pipe string in the case when the cross section of the channel is an eccentric ring is considered. The drilling mud is considered as a viscoplastic non-Newtonian fluid. The method for calculating the hydraulic parameters of the flushing fluid flow is based on the use of iterative methods of solving nonlinear equations and numerical analysis methods. The method can be used to calculate the hydraulic parameters of the flow in cases of laminar, structural and turbulent modes of fluid motion.
dc.format.extent1-14
dc.format.pages14
dc.identifier.citationKharchenko Y. Interaction of the flow of flushing fluid with the drill pipes and the wall of the well / Yevhen Kharchenko, Dmytro Butrynskyi // Ukrainian Journal of Mechanical Engineering and Materials Science. — Lviv : Lviv Politechnic Publishing House, 2024. — Vol 10. — No 2. — P. 1–14.
dc.identifier.citationenKharchenko Y. Interaction of the flow of flushing fluid with the drill pipes and the wall of the well / Yevhen Kharchenko, Dmytro Butrynskyi // Ukrainian Journal of Mechanical Engineering and Materials Science. — Lviv : Lviv Politechnic Publishing House, 2024. — Vol 10. — No 2. — P. 1–14.
dc.identifier.doidoi.org/10.23939/ujmems2024.02.001
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/119262
dc.language.isoen
dc.publisherВидавництво Львівської політехніки
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofУкраїнський журнал із машинобудування і матеріалознавства, 2 (10), 2024
dc.relation.ispartofUkrainian Journal of Mechanical Engineering and Materials Science, 2 (10), 2024
dc.relation.references[1] J.F. Heyda, "A Green's Function Solution for the Case of Non-Concentric Circular Cylinders", J. Franklin Inst. 267, pp.25-34, 1959.
dc.relation.references[2] P.J. Redberger, and M.E. Charles, "Axial Laminar Flow Correction", Cdn. J. Chern. Eng. 41, pp.79-86, 1963.
dc.relation.references[3] M. Haciislamoglu, and J. Langlinais, "Non-Newtonian Flow in Eccentric Annuli", Journal of Energy Resources Technology, Vol. 112, pp.163-169, 1990.
dc.relation.references[4] J.P. Hartnett, and M. Kostic, "Turbulent Friction Factor Correlation for Power-law Fluids flowing in Ducts of Arbitrary Cross-Section", Int. Comm. Heat Mass Transfer, 17, pp.59-65, 1990.
dc.relation.references[5] D.A. Siginer, and S.I. Bakhtiyarov, "Flow of drilling fluids in eccentric annuli", Journal of Non-Newtonian Fluid Mechanics, 78 (2-3), pp.119-132, 1998.
dc.relation.references[6] A.Kh. Mirzajanzade and S.A. Shirinzade, Povyshenie effektivnosti n kachestva bureniya glubokih skvazhii [Improving the Efficiency and Quality of Deep Well Drilling]. Moscow, Nedra Publ., 1986. [in Russian].
dc.relation.references[7] J.M. Nouri, and H. Umur, and J.H. Whitelaw, "Flow of Newtonian and Non-Newtonian Fluids in Concentric and Eccentric Annuli", J. Fluid Mech, 253, 617-641, ,1993.
dc.relation.references[8] M.P. Escudier, et al., "Fully Developed Laminar Flow of Non-Newtonian Liquids Through Annuli: Comparison of Numerical Calculations with Experiments", Experiments in Fluids 33 (1), pp.101-111, 2002.
dc.relation.references[9] N. Mitsuishi, and Y. Aoyagi, "Non-Newtonian Fluid Flow in an Eccentric Annulus", Journal of Chemical Eng., Japan, 6, No. 5, pp.402-408, 1973.
dc.relation.references[10] A.W. Iyoho, and J.A. Azar, "An accurate slot-flow model for non-Newtonian fluid flow through eccentric annuli", Soc. Pet. Eng. J., pp.565-572 , October 1981.
dc.relation.references[11] Y. Luo, and J.M. Peden, "Flow of drilling fluids through eccentric annuli", SPE Prod. Engineering, 5 (1), pp.91-96.
dc.relation.references[12] I. Azouz, et al., "Numerical simulation of laminar flow of yield-power-law fluids in conduits of arbitrary cross-section", Trans. ASME J. Fluids Eng., 115, pp.710-716, 1993.
dc.relation.references[13] Q.E. Hussein, and M.A.R. Sharif, "Viscoplastic fluid flow in irregular eccentric annuli", J. Energy Res. Tech., 120, pp.201-207, 1997.
dc.relation.references[14] T.C. Papanastasiou, "Flow of materials with yield", Journal of rheology, vol. 31., pp.385-404, 1987.
dc.relation.references[15] A. Wachs, "Numerical simulation of steady Bingham flow through an eccentric annul arcross-section by distributed Lagrange multiplier/fictitious domain and augmented Lagrangian methods", Journal of Non-Newtonian Fluid Mechanics, 142 (1-3), 183-198, 2006.
dc.relation.references[16] E.C. Bingham, Fluidity and plasticity. McGraw-Hill, NY, 1922.
dc.relation.references[17] P. Fang, and R. M. Manglik, and M. A. Jog, "Characteristics of laminar viscous shear-thinning fluid flows in eccentric annular channels", Journal of Non-Newtonian Fluid Mechanics, 84(1), pp.1-17, 1999.
dc.relation.references[18] J. H. Ferziger, M. Peric, Computational Methods for Fluid Dynamics, 3-rd. ed. Springer Verlad, Berlin, 2002.
dc.relation.references[19] R. Glowinski, "Finite element methods for incompressible viscous flow", in P.G. Ciarlet, J.L. Lions (Eds.), Handbook of Numerical Analysis, vol. IX, North-Holland, Amsterdam, pp.3-1176, 2003.
dc.relation.references[20] N.Roquet, and P. Saramito, "An adaptive finite element method for Bingham fluid flows around a cylinder", Comput. Meth. Appl. Mech. Eng. 192,pp3317-3341, 2003.
dc.relation.references[21] R.R. Huilgol, and Z. You, "Application of the augmented Lagrangian method to steady pipe flows of Bingham, Casson and Herschel-Bulkley fluids", J. Non-Newtonian Fluid Mech., 128 (2-3), pp.126-143, 2005.
dc.relation.references[22] T.A. Tong, et al., "Numerical simulation of non-Newtonian fluid flow in partially blocked eccentric annuli", Journal of Petroleum Science and Engineering, vol. 193. № 107368, 2020.
dc.relation.references[23] Ansys Fluent 2020 R1.Theory Guide, Ansys Inc., 2021.
dc.relation.references[24] E.V. Kharchenko, Dinamicheskie processy burovyh ustanovok [Dynamic processes of drilling rigs]. Lviv, Svit Publ., 1991. [in Russian].
dc.relation.references[25] I.A. Charniy, Neustanovivsheesya dvizhenie realnoj zhidkosti v trubah [Unsteady motion of real liquid in pipes]. Moscow, Nedra Publ., 1975. [in Russian].
dc.relation.references[26] N.A. Gukasov, Spravochnoe posobie po gidravlike i gidrodinamike v burenii [Reference Manual on Hydraulics and Hydrodynamics in Drilling]. Moscow, Nedra Publ., 1982. [in Russian].
dc.relation.references[27] R.I. Shishchenko, B.I. Yesmn, P.I. Kondratenko, Gidravlika promyvochnyh zhidkostej [Hydraulics of flushing fluids]. Moscow, Nedra Publ., 1976. [in Russian].
dc.relation.references[28] V.A. Mischevich, and N.A. Sidorov, Spravochnik inzhenera po bureniyu [Reference book of the engineer on drilling]. vol.1. Moscow, Nedra Publ., 1973. [in Russian].
dc.relation.referencesen[1] J.F. Heyda, "A Green's Function Solution for the Case of Non-Concentric Circular Cylinders", J. Franklin Inst. 267, pp.25-34, 1959.
dc.relation.referencesen[2] P.J. Redberger, and M.E. Charles, "Axial Laminar Flow Correction", Cdn. J. Chern. Eng. 41, pp.79-86, 1963.
dc.relation.referencesen[3] M. Haciislamoglu, and J. Langlinais, "Non-Newtonian Flow in Eccentric Annuli", Journal of Energy Resources Technology, Vol. 112, pp.163-169, 1990.
dc.relation.referencesen[4] J.P. Hartnett, and M. Kostic, "Turbulent Friction Factor Correlation for Power-law Fluids flowing in Ducts of Arbitrary Cross-Section", Int. Comm. Heat Mass Transfer, 17, pp.59-65, 1990.
dc.relation.referencesen[5] D.A. Siginer, and S.I. Bakhtiyarov, "Flow of drilling fluids in eccentric annuli", Journal of Non-Newtonian Fluid Mechanics, 78 (2-3), pp.119-132, 1998.
dc.relation.referencesen[6] A.Kh. Mirzajanzade and S.A. Shirinzade, Povyshenie effektivnosti n kachestva bureniya glubokih skvazhii [Improving the Efficiency and Quality of Deep Well Drilling]. Moscow, Nedra Publ., 1986. [in Russian].
dc.relation.referencesen[7] J.M. Nouri, and H. Umur, and J.H. Whitelaw, "Flow of Newtonian and Non-Newtonian Fluids in Concentric and Eccentric Annuli", J. Fluid Mech, 253, 617-641, ,1993.
dc.relation.referencesen[8] M.P. Escudier, et al., "Fully Developed Laminar Flow of Non-Newtonian Liquids Through Annuli: Comparison of Numerical Calculations with Experiments", Experiments in Fluids 33 (1), pp.101-111, 2002.
dc.relation.referencesen[9] N. Mitsuishi, and Y. Aoyagi, "Non-Newtonian Fluid Flow in an Eccentric Annulus", Journal of Chemical Eng., Japan, 6, No. 5, pp.402-408, 1973.
dc.relation.referencesen[10] A.W. Iyoho, and J.A. Azar, "An accurate slot-flow model for non-Newtonian fluid flow through eccentric annuli", Soc. Pet. Eng. J., pp.565-572 , October 1981.
dc.relation.referencesen[11] Y. Luo, and J.M. Peden, "Flow of drilling fluids through eccentric annuli", SPE Prod. Engineering, 5 (1), pp.91-96.
dc.relation.referencesen[12] I. Azouz, et al., "Numerical simulation of laminar flow of yield-power-law fluids in conduits of arbitrary cross-section", Trans. ASME J. Fluids Eng., 115, pp.710-716, 1993.
dc.relation.referencesen[13] Q.E. Hussein, and M.A.R. Sharif, "Viscoplastic fluid flow in irregular eccentric annuli", J. Energy Res. Tech., 120, pp.201-207, 1997.
dc.relation.referencesen[14] T.C. Papanastasiou, "Flow of materials with yield", Journal of rheology, vol. 31., pp.385-404, 1987.
dc.relation.referencesen[15] A. Wachs, "Numerical simulation of steady Bingham flow through an eccentric annul arcross-section by distributed Lagrange multiplier/fictitious domain and augmented Lagrangian methods", Journal of Non-Newtonian Fluid Mechanics, 142 (1-3), 183-198, 2006.
dc.relation.referencesen[16] E.C. Bingham, Fluidity and plasticity. McGraw-Hill, NY, 1922.
dc.relation.referencesen[17] P. Fang, and R. M. Manglik, and M. A. Jog, "Characteristics of laminar viscous shear-thinning fluid flows in eccentric annular channels", Journal of Non-Newtonian Fluid Mechanics, 84(1), pp.1-17, 1999.
dc.relation.referencesen[18] J. H. Ferziger, M. Peric, Computational Methods for Fluid Dynamics, 3-rd. ed. Springer Verlad, Berlin, 2002.
dc.relation.referencesen[19] R. Glowinski, "Finite element methods for incompressible viscous flow", in P.G. Ciarlet, J.L. Lions (Eds.), Handbook of Numerical Analysis, vol. IX, North-Holland, Amsterdam, pp.3-1176, 2003.
dc.relation.referencesen[20] N.Roquet, and P. Saramito, "An adaptive finite element method for Bingham fluid flows around a cylinder", Comput. Meth. Appl. Mech. Eng. 192,pp3317-3341, 2003.
dc.relation.referencesen[21] R.R. Huilgol, and Z. You, "Application of the augmented Lagrangian method to steady pipe flows of Bingham, Casson and Herschel-Bulkley fluids", J. Non-Newtonian Fluid Mech., 128 (2-3), pp.126-143, 2005.
dc.relation.referencesen[22] T.A. Tong, et al., "Numerical simulation of non-Newtonian fluid flow in partially blocked eccentric annuli", Journal of Petroleum Science and Engineering, vol. 193. No 107368, 2020.
dc.relation.referencesen[23] Ansys Fluent 2020 R1.Theory Guide, Ansys Inc., 2021.
dc.relation.referencesen[24] E.V. Kharchenko, Dinamicheskie processy burovyh ustanovok [Dynamic processes of drilling rigs]. Lviv, Svit Publ., 1991. [in Russian].
dc.relation.referencesen[25] I.A. Charniy, Neustanovivsheesya dvizhenie realnoj zhidkosti v trubah [Unsteady motion of real liquid in pipes]. Moscow, Nedra Publ., 1975. [in Russian].
dc.relation.referencesen[26] N.A. Gukasov, Spravochnoe posobie po gidravlike i gidrodinamike v burenii [Reference Manual on Hydraulics and Hydrodynamics in Drilling]. Moscow, Nedra Publ., 1982. [in Russian].
dc.relation.referencesen[27] R.I. Shishchenko, B.I. Yesmn, P.I. Kondratenko, Gidravlika promyvochnyh zhidkostej [Hydraulics of flushing fluids]. Moscow, Nedra Publ., 1976. [in Russian].
dc.relation.referencesen[28] V.A. Mischevich, and N.A. Sidorov, Spravochnik inzhenera po bureniyu [Reference book of the engineer on drilling]. vol.1. Moscow, Nedra Publ., 1973. [in Russian].
dc.rights.holder© Національний університет “Львівська політехніка”, 2024
dc.rights.holder© Kharchenko Ye., Butrynskyi D., 2024
dc.subjectdrilling fluid flow
dc.subjectnon-Newtonian fluid
dc.subjecteccentric annulus
dc.titleInteraction of the flow of flushing fluid with the drill pipes and the wall of the well
dc.typeArticle

Files

Original bundle

Now showing 1 - 2 of 2
Thumbnail Image
Name:
2024v10n2_Kharchenko_Y-Interaction_of_the_flow_1-14.pdf
Size:
223.46 KB
Format:
Adobe Portable Document Format
Download
Thumbnail Image
Name:
2024v10n2_Kharchenko_Y-Interaction_of_the_flow_1-14__COVER.png
Size:
444.51 KB
Format:
Portable Network Graphics
Download

License bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.76 KB
Format:
Plain Text
Description:
Download

Collections

Ukrainian Journal of Mechanical Engineering and Materials Science. – 2024. – Vol. 10, No. 2