Environmental Problems

Search Results

Now showing 1 - 1 of 1

Disposal of used forming mixtures from foundries of machine-building plants in the production of perforated material
(Видавництво Львівської політехніки, 2022-03-01) Malovanyy, Myroslav; Ilyash, Oksana; Povzun, Oleksiy; Bylym, Ludmyla; Osinniy, Nikita; Lviv Polytechnic National University; National University “Yuri Kondratyuk Poltava Polytechnic”; Donetsk National Technical University
The waste of foundries of machine-building plants - spent moulding mixtures was studied. The expediency of using spent mixtures of foundry production as a siliceous component of foam concrete mixtures has been proven. The spent mixtures were studied for their foaming ability. The foam properties are determined. The effect of concrete mixture components on the pore-forming ability of foam agents was investigated. Of the six foaming agents studied in the work, saponified tree resin was found to be the most effective. The technological parameters for the preparation of aerated concrete mixture have been developed. The average density of foam concrete in the dry state and its limit of compressive strength were used as criteria for resource evaluation of used moulding mixtures of foundry production. Foam concrete products of non-autoclave hardening with an average density of not less than 900 kg/ m3 and a compressive strength of not less than 4.5 MPa were obtained.