Ukrainian Journal of Mechanical Engineering and Materials Science
Permanent URI for this communityhttps://ena.lpnu.ua/handle/ntb/31565
Browse
2 results
Search Results
Item Research on the characteristics of gear-cutting processes for external and internal meshing using the power skiving method(Видавництво Львівської політехніки, 2023-02-28) Hrytsay, Ihor; Slipchuk, Andrii; Bembenek, Michal; Lviv Polytechnic National University; AGH University of KrakowThe results of modelling and investigation of external and internal gear-cutting processes using the power skiving method are presented. The principles of constructing a geometric model of undistorted chip formation are described, based on parameters from which cutting forces are calculated. It is found that, under identical conditions, the cutting force is three times greater when internal gears are cut than when external gears are cut. The influence of this force on the machining error is determined by the gear pitch parameter. It is shown that the most rational way to reduce the machining error is to reduce the cutting force by reducing the axial feed rather than by increasing the number of passes.Item Gears with asymmetric tooth profiles and new alternative method of their manufacturing(Lviv Politechnic Publishing House, 2017-10-19) Hrytsay, Ihor; Lviv Polytechnic National UniversityThe article presents a new gears cutting process – radial circular generating method and describes its multiple benefits for manufacturers of transmissions. The overall increase of efficiency is realized due to using a simple tool and the conventional gear tool machine for cutting gears of different types. In particular, this new method was used for cutting gears with the asymmetric profiles of wheel teeth, which allows considerably amplifying power transmission density, increasing load capacity, and reducing size and weight.