Ініційована пероксидами олігомеризація фракцій С5 і С9 – побічних продуктів виробництва етену
Loading...
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Видавництво Львівської політехніки
Lviv Politechnic Publishing House
Lviv Politechnic Publishing House
Abstract
Наведено результати дослідження ініційованої органічними пероксидами олігомеризації вуглеводневих фракцій С5 і С9 – побічних продуктів виробництва етену піролізом прямогонного бензину. Вивчено вплив температури, тривалості процесу, типу та концентрації ініціатора, масового співвідношення [фракція С5] : [фракція С9] на вихід і фізико-хімічні показники вуглеводневої смоли. Встановлено оптимальні умови процесу (температура – 448 К, тривалість реакції – 6 годин, концентрація ініціатора – ді-трет-бутил-пероксиду 0,05 моль/дм3), за яких одержують вуглеводневу смолу з виходом 33,0 % мас., фізико-хімічні показники якої відповідають вимогам ТУ У 6-05743160.020-99 “Смола нафтополімерна лакофарбова синтетична”.
The results of the study of the oligomerization of hydrocarbon fractions C5 and C9 – byproducts of ethene production by pyrolysis of straight-run gasoline initiated by organic peroxides are presented. The influence of temperature, process duration, nature and concentration of the initiator, mass ratio [C5 fraction] : [C9 fraction] on the yield and physicochemical parameters of the hydrocarbon resin is studied. The optimal process conditions were established – temperature 448 K, reaction duration 6 hours, initiator concentration – di-tert-butyl peroxide 0.05 mol/dm3, under which a hydrocarbon resin is obtained with a yield of 33.0 wt. %, the physicochemical parameters of which meet the requirements of TU U 6-05743160.020-99 “Synthetic petroleum polymer paint and varnish resin”.
The results of the study of the oligomerization of hydrocarbon fractions C5 and C9 – byproducts of ethene production by pyrolysis of straight-run gasoline initiated by organic peroxides are presented. The influence of temperature, process duration, nature and concentration of the initiator, mass ratio [C5 fraction] : [C9 fraction] on the yield and physicochemical parameters of the hydrocarbon resin is studied. The optimal process conditions were established – temperature 448 K, reaction duration 6 hours, initiator concentration – di-tert-butyl peroxide 0.05 mol/dm3, under which a hydrocarbon resin is obtained with a yield of 33.0 wt. %, the physicochemical parameters of which meet the requirements of TU U 6-05743160.020-99 “Synthetic petroleum polymer paint and varnish resin”.
Description
Citation
Федотова О. Б. Ініційована пероксидами олігомеризація фракцій С5 і С9 – побічних продуктів виробництва етену / О. Б. Федотова, Б. О. Дзіняк // Хімія, технологія речовин та їх застосування. — Львів : Видавництво Львівської політехніки, 2025. — Том 8. — № 1. — С. 61–67.