Production of Distilled Bitumen from High-Viscosity Crude Oils of Ukrainian Fields

Simple item page
dc.citation.epage468
dc.citation.issue3
dc.citation.spage461
dc.contributor.affiliationLviv Polytechnic National University
dc.contributor.affiliationState Higher Educational Institution "Ukrainian State University of Chemical Technology"
dc.contributor.authorYarmola, Tetiana
dc.contributor.authorTopilnytskyy, Petro
dc.contributor.authorGunka, Volodymyr
dc.contributor.authorTertyshna, Olena
dc.contributor.authorRomanchuk, Viktoria
dc.coverage.placenameЛьвів
dc.coverage.placenameLviv
dc.date.accessioned2024-01-22T12:00:09Z
dc.date.available2024-01-22T12:00:09Z
dc.date.created2022-03-16
dc.date.issued2022-03-16
dc.description.abstractВизначено характеристики вихідних нафт та суміші нафт Яблунівського родовища Полтавської області України, для вибору подальших шляхів переробки. Встановлено, що нафти є важкими з високим вмістом сірки, не містять світлих дистилятів, мають високу густину та в’язкість. В статті розглядається можливість одержання дорожніх бітумів з високов’язкої нафти. В результаті розгонки суміші нафт одержано дистиляційний бітум, який відповідає вимогам на бітум дорожній 100/150. Щоб покращити довговічність та стійкість до старіння даного бітуму до нього вводили полімерний модифікатор. Дослідження показали, що додавання модифікатора в кількості 3 % є доцільним та підвищує експлуатаційні характеристики бітуму до марки БМВ 60/90.
dc.description.abstractThe characteristics of initial crudes of Yablunivske field (Poltava, Ukraine) and the properties of blended crudes have been examined to select the ways of their further processing. The crude oils were found to be heavy high-sulfuric oils without light distillates. The possibility of obtaining paving bitumen from blended crudes under study has been considered. Distilled bitumen obtained through distillation of this blend was found to meet the requirements for commercial paving bitumen 100/150. To improve the durability and resistance to aging of resulting bitumen, a polymeric modifier was added. The modifier amount of 3 wt.% was found to be appropriate to improve the operational characteristics of obtained bitumen to those of BMW 60/90 grade.
dc.format.extent461-468
dc.format.pages8
dc.identifier.citationProduction of Distilled Bitumen from High-Viscosity Crude Oils of Ukrainian Fields / Tetiana Yarmola, Petro Topilnytskyy, Volodymyr Gunka, Olena Tertyshna, Viktoria Romanchuk // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2022. — Vol 16. — No 3. — P. 461–468.
dc.identifier.citationenProduction of Distilled Bitumen from High-Viscosity Crude Oils of Ukrainian Fields / Tetiana Yarmola, Petro Topilnytskyy, Volodymyr Gunka, Olena Tertyshna, Viktoria Romanchuk // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2022. — Vol 16. — No 3. — P. 461–468.
dc.identifier.doidoi.org/10.23939/chcht16.03.461
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/60993
dc.language.isoen
dc.publisherВидавництво Львівської політехніки
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofChemistry & Chemical Technology, 3 (16), 2022
dc.relation.references[1] Europe Modified Bitumen Market - Growth, Trends, Covid-19 Impact, and Forecasts (2022 - 2027). Mordor Intelligence. https://www.mordorintelligence.com/industry-reports/europe-modified-bitu... (accessed Jan 12, 2022).
dc.relation.references[2] France Tops Eurobitume’s European Bitumen Consumption Table. Asphalt Paving, Compaction & Testing. http://ropl-wh-live.sgcdev.io/wh3/news/france-tops-eurobitumes-european-... (accessed Oct 19, 2021).
dc.relation.references[3] Asphalt Manufacturing Industry in the US - Market Research Report https://www.ibisworld.com/united-states/market-research-reports/asphalt-... (accessed Jan 12, 2022).
dc.relation.references[4] Bitumen Market Size, Share and Industry Analysis Report by Product (Paving, Oxidized, Cutback, Emulsion, Polymer Modified), By Application (Roadways, Waterproofing, Adhesives, Insulation), Regional Outlook, Application Potential, Competitive Market Share & Forecast, 2021 – 2027. Report ID: GMI1100, 2020 https://www.gminsights.com/industry-analysis/bitumen-market (accessed Oct 19, 2021).
dc.relation.references[5] Pan, Y.; Han, D.; Yang, T.; Tang, D.; Huang, Y.; Tang, N.; Zhao, Y. Field Observations and Laboratory Evaluations of Asphalt Pavement Maintenance Using Hot In-Place Recycling. Constr. Build. Mater. 2021, 271, 121864. https://doi.org/10.1016/j.conbuildmat.2020.121864
dc.relation.references[6] Residual Asphalt Production. GlobeCore. https://emulsion.globecore.com/residual-asphalt-production (accessed Oct 21, 2021)
dc.relation.references[7] The Bitumen Industry. – A Global Perspective. Production, Chemistry, Use, Specifi Cation and Occupational Exposure. 3rd edn. [Online] Asphalt Institute Inc. and European Bitumen Association–Eurobitume: USA, 2015.
dc.relation.references[8] Babatunde, O.; Boichenko, S.; Topilnytskyy, P.; Romanchuk, V. Comparing Physico-Chemical Properties of Oil Fields of Nigeria and Ukraine. Chem. Chem. Technol. 2017, 11 (2), 220-225. https://doi.org/10.23939/chcht11.02.220
dc.relation.references[9] Riva, J.P.; Atwater, G.I. World Distribution of Heavy Oils and Tar Sands. [Online] Britannica. https://www.britannica.com/science/heavy-oil/Tar-sands (accessed Jan 12, 2022).
dc.relation.references[10] Speight, J.G. Heavy Oil Production Processes. Elsevier Inc. 2013. https://doi.org/10.1016/C2012-0-00598-4
dc.relation.references[11] Topilnytskyy, P.; Romanchuk, V.; Yarmola, T.; Stebelska H. Study on Rheological Properties of Extra-Heavy Crude Oil from Fields of Ukraine. Chem. Chem. Technol. 2020, 14 (3), 412–419. https://doi.org/10.23939/chcht14.03.220
dc.relation.references[12] Strong Growth: Bitumen Market Reached 190 Thousand Tons. https://aet.in.ua/en/news/uverennyj-rost-rynok-bituma-v-avguste-dostig-1... (accessed Oct 12, 2021)
dc.relation.references[13] Behnood, A.; Gharehveran, M.M. Morphology, Rheology and Physical Properties of Polymer-Modified Asphalt Binders. Eur. Polym. J. 2019, 112, 766-791. https://doi.org/10.1016/j.eurpolymj.2018.10.049
dc.relation.references[14] Remisova, E. Improvement in Properties of Bitumen Using Selected Additives. Fifth International Conference on Road and Rail Infrastructure. 17-19 May 2018, Zadar, Croatia. https://doi.org/10.5592/CO/CETRA.2018.737
dc.relation.references[15] Bratychak, M.; Gunka, V.; Prysiazhnyi, Y.; Hrynchuk, Y.; Sidun, I.; Demchuk, Y.; Shyshchak, O. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 1. Effect of Solvent Nature on the Properties of Petroleum Residues Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15, 274-283. https://doi.org/10.23939/chcht15.02.274
dc.relation.references[16] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Poliak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 3. Tar Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15 (4), 608-620. https://doi.org/10.23939/chcht15.04.608
dc.relation.references[17] Gunka, V.; Bilushchak, H.; Prysiazhnyi, Yu.; Demchuk, Yu.; Hrynchuk, Yu.; Sidun, I.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues.4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products. Chem. Chem. Technol. 2021, 16 (1), 142-149. https://doi.org/10.23939/chcht16.01.142
dc.relation.references[18] Gunka, V.; Demchuk, Y.; Sidun, I.; Kochubei, V.; Shved. M.; Romanchuk, V.; Korchak, B. Chemical modification of road oil bitumens by formaldehyde. Pet. Coal. 2020, 62 (1), 420-429.
dc.relation.references[19] Kemalov,A.F.; Kemalov, R.A.; Abdrafikova, I.M.; Fakhretdinov, P.S.; Valiev, D.Z. Polyfunctional Modifiers for Bitumen and Bituminous Materials with High Performance. Adv. Mater. Sci. Eng. 2018, 2018, Article ID 7913527. https://doi.org/10.1155/2018/7913527
dc.relation.references[20] Asphalt Production and Oil Refining. Pavement Interactive. https://pavementinteractive.org/reference-desk/materials/asphalt/asphalt... (accessed Oct 19, 2021).
dc.relation.references[21] Holý, M.; Remišová, E. Analysis of Influence of Bitumen Composition on the Properties Represented by Empirical and Viscosity Test. Transp. Res. Proc. 2019, 40, 34-41. https://doi.org/10.1016/j.trpro.2019.07.007
dc.relation.references[22] Gunka, V.; Demchuk, Y.; Sidun, I.; Miroshnichenko, D.; Nyakuma, B.B.; Pyshyev, S. Application of Phenol-Cresol-Formaldehyde Resin as an Adhesion Promoter for Bitumen and Asphalt Concrete. Road Mater. Pavement Des. 2021, 22 (12), 2906-2918. https://doi.org/10.1080/14680629.2020.1808518
dc.relation.references[23] Gunka V.; Demchuk Yu.; Pyshyev S.; Starovoit A.; Lypko Y. The Selection of Raw Materials for the Production of Road Bitumen Modified by Phenol-Cresol-Formaldehyde Resins. Pet. Coal 2018, 60 (6), 1199-1206.
dc.relation.references[24] Demchuk, Y.; Gunka, V.; Sidun, I.; Solodkyy, S. Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials. Proc. EcoComfort. 2020, 100, 95-102. https://doi.org/10.1007/978-3-030-57340-9_1
dc.relation.references[25] Demchuk, Y.; Sidun, I.; Gunka, V.; Pyshyev, S.; Solodkyy, S. Effect of Phenol-Cresol-Formaldehyde Resin on Adhesive and Physico-Mechanical Properties of Road Bitumen. Chem. Chem. Technol. 2018, 12 (4), 456-461. https://doi.org/10.23939/chcht12.04.456
dc.relation.references[26] Pyshyev, S.; Demchuk, Y.; Gunka, V.; Sidun, I.; Shved, M.; Bilushchak, H.; Obshta, A. Development of mathematical model and identification of optimal conditions to obtain phenol-cresol-formaldehyde resin. Chem. Chem. Technol. 2019, 13 (2), 212-217. https://doi.org/10.23939/chcht13.02.212
dc.relation.references[27] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Bitumen Modified with Maleic Anhydride. Chem. Chem. Technol. 2021, 15 (3), 443-449. https://doi.org/10.23939/chcht15.03.443
dc.relation.references[28] Wręczycki, J.; Demchuk, Y.; Bieliński, D.M.; Bratychak, M.; Gunka, V.; Anyszka, R.; Gozdek, T. Bitumen Binders Modified with Sulfur/Organic Copolymers. Materials 2022, 15 (5), 1774. https://doi.org/10.3390/ma15051774
dc.relation.references[29] Topilnytskyy, P.I.; Romanchuk, V.V.; Yarmola, T.V.; Zinchenko, D.V. Physico-Chemical Properties of High-Sulfuric Heavy Oils from Yablunivske Deposit. Chemistry, Technology and Application of Substances. 2020, 3 (1), 75-82. https://doi.org/10.23939/ctas2020.01.075
dc.relation.references[30] ASTM D1298-12b. Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.
dc.relation.references[31] EN ISO 3104. Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity.
dc.relation.references[32] Topilnytskyy, P.; Paiuk, S.; Stebelska, H.; Romanchuk, V.; Yarmola, T. Technological Features of High-Sulfur Heavy Crude Oils Processing. Chem. Chem. Technol. 2019, 13 (4), 503-509. https://doi.org/10.23939/chcht13.04.503
dc.relation.references[33] ASTM D95-13. Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
dc.relation.references[34] ASTM D4294. Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry.
dc.relation.references[35] ASTM D3230. Standard Test Method for Salts in Crude Oil (Electrometric Method).
dc.relation.references[36] ASTM D974. Standard Test Method for Acid and Base Number by Color-Indicator Titration.
dc.relation.references[37] ASTM D97. Standard Test Method for Pour Point of Petroleum Products.
dc.relation.references[38] ASTM D2887. Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
dc.relation.references[39] ASTM D5307. Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography.
dc.relation.references[40] ASTM D6352. Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography.
dc.relation.references[41] ASTM D938. Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum.
dc.relation.references[42] ASTM D1321. Standard Test Method for Needle Penetration of Petroleum Waxes.
dc.relation.references[43] EN 1426. Bitumen and bituminous binders - Determination of needle penetration.
dc.relation.references[44] EN 1427. Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method.
dc.relation.references[45] DSTU 8825:2019. Bitumen and bituminous binders. Determination of the ductility (National Standards of Ukraine).
dc.relation.references[46] EN 12593. Bitumen and bituminous binders - Determination of the Fraass breaking point.
dc.relation.references[47] Petroleum and related products. Determination of flash and fire points. Cleveland open cup method.
dc.relation.references[48] EN 12607-1. Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method.
dc.relation.references[49] Topilnytskyy, P.; Yarmola, T.; Romanchuk, V.; Kucinska-Lipka, J. Peculiarities of Dewatering Technology for Heavy High-Viscosity Crude Oils of Eastern Region of Ukraine. Chem. Chem. Technol. 2021, 15 (3),423-431.https://doi.org/10.23939/chcht15.03.423
dc.relation.references[50] Topilnytskyy, P.; Romanchuk, V.; Boichenko, S.; Golych, Y. Physico-Chemical Properties and Efficiency of Demulsifiers Based on Block Copolymers of ethylene and Propylene Oxides. Chem. Chem. Technol. 2014, 8(2),211-218.https://doi.org/10.23939/chcht08.02.211
dc.relation.references[51] EN 12591. Bitumen and bituminous binders - Specifications for paving grade bitumens.
dc.relation.references[52] Standard of the Organization of Ukraine. http://online.budstandart.com/ru/catalog/doc-page.html?id_doc=84291
dc.relation.references[53] Hrynyshyn, O.B.; Fryder, I.V. Metody oderzhannya naftovykh bitumiv na osnovi zalyshkiv pererobky parafinystykh naft. Vopr. Khimii i Khimicheskoi Tekhnologii 2013, 3, 109-111.
dc.relation.references[54] Kataware Aniket, V.; Singh, D. Effects of Wax-Based, Chemical-Based, and Water-Based Warm-Mix Additives on Mechanical Performance of Asphalt Binders. J. Mater. Civ. Eng. 2018, 30, 04018237. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002441
dc.relation.references[55] Synthetic wax. The Versatile Additive for Asphalt Mixes. https://www.syntheticwax.com/ (accessed on May 11, 2019).
dc.relation.references[56] Edwards, Y.; Isacsson, U. Wax in Bitumen (Part II—Characterization and Effects). Road Mater. Pavement Des. 2005, 6, 439–468. https://doi.org/10.1080/14680629.2005.9690015
dc.relation.references[57] SOU 42.1-37641918-068:2017. Bitumy dorozhni viazki, modyfikovani dobavkamy na osnovi voskiv. Tekhnichni umovy (National Standards of Ukraine).
dc.relation.referencesen[1] Europe Modified Bitumen Market - Growth, Trends, Covid-19 Impact, and Forecasts (2022 - 2027). Mordor Intelligence. https://www.mordorintelligence.com/industry-reports/europe-modified-bitu... (accessed Jan 12, 2022).
dc.relation.referencesen[2] France Tops Eurobitume’s European Bitumen Consumption Table. Asphalt Paving, Compaction & Testing. http://ropl-wh-live.sgcdev.io/wh3/news/france-tops-eurobitumes-european-... (accessed Oct 19, 2021).
dc.relation.referencesen[3] Asphalt Manufacturing Industry in the US - Market Research Report https://www.ibisworld.com/united-states/market-research-reports/asphalt-... (accessed Jan 12, 2022).
dc.relation.referencesen[4] Bitumen Market Size, Share and Industry Analysis Report by Product (Paving, Oxidized, Cutback, Emulsion, Polymer Modified), By Application (Roadways, Waterproofing, Adhesives, Insulation), Regional Outlook, Application Potential, Competitive Market Share & Forecast, 2021 – 2027. Report ID: GMI1100, 2020 https://www.gminsights.com/industry-analysis/bitumen-market (accessed Oct 19, 2021).
dc.relation.referencesen[5] Pan, Y.; Han, D.; Yang, T.; Tang, D.; Huang, Y.; Tang, N.; Zhao, Y. Field Observations and Laboratory Evaluations of Asphalt Pavement Maintenance Using Hot In-Place Recycling. Constr. Build. Mater. 2021, 271, 121864. https://doi.org/10.1016/j.conbuildmat.2020.121864
dc.relation.referencesen[6] Residual Asphalt Production. GlobeCore. https://emulsion.globecore.com/residual-asphalt-production (accessed Oct 21, 2021)
dc.relation.referencesen[7] The Bitumen Industry, A Global Perspective. Production, Chemistry, Use, Specifi Cation and Occupational Exposure. 3rd edn. [Online] Asphalt Institute Inc. and European Bitumen Association–Eurobitume: USA, 2015.
dc.relation.referencesen[8] Babatunde, O.; Boichenko, S.; Topilnytskyy, P.; Romanchuk, V. Comparing Physico-Chemical Properties of Oil Fields of Nigeria and Ukraine. Chem. Chem. Technol. 2017, 11 (2), 220-225. https://doi.org/10.23939/chcht11.02.220
dc.relation.referencesen[9] Riva, J.P.; Atwater, G.I. World Distribution of Heavy Oils and Tar Sands. [Online] Britannica. https://www.britannica.com/science/heavy-oil/Tar-sands (accessed Jan 12, 2022).
dc.relation.referencesen[10] Speight, J.G. Heavy Oil Production Processes. Elsevier Inc. 2013. https://doi.org/10.1016/P.2012-0-00598-4
dc.relation.referencesen[11] Topilnytskyy, P.; Romanchuk, V.; Yarmola, T.; Stebelska H. Study on Rheological Properties of Extra-Heavy Crude Oil from Fields of Ukraine. Chem. Chem. Technol. 2020, 14 (3), 412–419. https://doi.org/10.23939/chcht14.03.220
dc.relation.referencesen[12] Strong Growth: Bitumen Market Reached 190 Thousand Tons. https://aet.in.ua/en/news/uverennyj-rost-rynok-bituma-v-avguste-dostig-1... (accessed Oct 12, 2021)
dc.relation.referencesen[13] Behnood, A.; Gharehveran, M.M. Morphology, Rheology and Physical Properties of Polymer-Modified Asphalt Binders. Eur. Polym. J. 2019, 112, 766-791. https://doi.org/10.1016/j.eurpolymj.2018.10.049
dc.relation.referencesen[14] Remisova, E. Improvement in Properties of Bitumen Using Selected Additives. Fifth International Conference on Road and Rail Infrastructure. 17-19 May 2018, Zadar, Croatia. https://doi.org/10.5592/CO/CETRA.2018.737
dc.relation.referencesen[15] Bratychak, M.; Gunka, V.; Prysiazhnyi, Y.; Hrynchuk, Y.; Sidun, I.; Demchuk, Y.; Shyshchak, O. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 1. Effect of Solvent Nature on the Properties of Petroleum Residues Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15, 274-283. https://doi.org/10.23939/chcht15.02.274
dc.relation.referencesen[16] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Poliak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 3. Tar Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15 (4), 608-620. https://doi.org/10.23939/chcht15.04.608
dc.relation.referencesen[17] Gunka, V.; Bilushchak, H.; Prysiazhnyi, Yu.; Demchuk, Yu.; Hrynchuk, Yu.; Sidun, I.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues.4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products. Chem. Chem. Technol. 2021, 16 (1), 142-149. https://doi.org/10.23939/chcht16.01.142
dc.relation.referencesen[18] Gunka, V.; Demchuk, Y.; Sidun, I.; Kochubei, V.; Shved. M.; Romanchuk, V.; Korchak, B. Chemical modification of road oil bitumens by formaldehyde. Pet. Coal. 2020, 62 (1), 420-429.
dc.relation.referencesen[19] Kemalov,A.F.; Kemalov, R.A.; Abdrafikova, I.M.; Fakhretdinov, P.S.; Valiev, D.Z. Polyfunctional Modifiers for Bitumen and Bituminous Materials with High Performance. Adv. Mater. Sci. Eng. 2018, 2018, Article ID 7913527. https://doi.org/10.1155/2018/7913527
dc.relation.referencesen[20] Asphalt Production and Oil Refining. Pavement Interactive. https://pavementinteractive.org/reference-desk/materials/asphalt/asphalt... (accessed Oct 19, 2021).
dc.relation.referencesen[21] Holý, M.; Remišová, E. Analysis of Influence of Bitumen Composition on the Properties Represented by Empirical and Viscosity Test. Transp. Res. Proc. 2019, 40, 34-41. https://doi.org/10.1016/j.trpro.2019.07.007
dc.relation.referencesen[22] Gunka, V.; Demchuk, Y.; Sidun, I.; Miroshnichenko, D.; Nyakuma, B.B.; Pyshyev, S. Application of Phenol-Cresol-Formaldehyde Resin as an Adhesion Promoter for Bitumen and Asphalt Concrete. Road Mater. Pavement Des. 2021, 22 (12), 2906-2918. https://doi.org/10.1080/14680629.2020.1808518
dc.relation.referencesen[23] Gunka V.; Demchuk Yu.; Pyshyev S.; Starovoit A.; Lypko Y. The Selection of Raw Materials for the Production of Road Bitumen Modified by Phenol-Cresol-Formaldehyde Resins. Pet. Coal 2018, 60 (6), 1199-1206.
dc.relation.referencesen[24] Demchuk, Y.; Gunka, V.; Sidun, I.; Solodkyy, S. Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials. Proc. EcoComfort. 2020, 100, 95-102. https://doi.org/10.1007/978-3-030-57340-9_1
dc.relation.referencesen[25] Demchuk, Y.; Sidun, I.; Gunka, V.; Pyshyev, S.; Solodkyy, S. Effect of Phenol-Cresol-Formaldehyde Resin on Adhesive and Physico-Mechanical Properties of Road Bitumen. Chem. Chem. Technol. 2018, 12 (4), 456-461. https://doi.org/10.23939/chcht12.04.456
dc.relation.referencesen[26] Pyshyev, S.; Demchuk, Y.; Gunka, V.; Sidun, I.; Shved, M.; Bilushchak, H.; Obshta, A. Development of mathematical model and identification of optimal conditions to obtain phenol-cresol-formaldehyde resin. Chem. Chem. Technol. 2019, 13 (2), 212-217. https://doi.org/10.23939/chcht13.02.212
dc.relation.referencesen[27] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Bitumen Modified with Maleic Anhydride. Chem. Chem. Technol. 2021, 15 (3), 443-449. https://doi.org/10.23939/chcht15.03.443
dc.relation.referencesen[28] Wręczycki, J.; Demchuk, Y.; Bieliński, D.M.; Bratychak, M.; Gunka, V.; Anyszka, R.; Gozdek, T. Bitumen Binders Modified with Sulfur/Organic Copolymers. Materials 2022, 15 (5), 1774. https://doi.org/10.3390/ma15051774
dc.relation.referencesen[29] Topilnytskyy, P.I.; Romanchuk, V.V.; Yarmola, T.V.; Zinchenko, D.V. Physico-Chemical Properties of High-Sulfuric Heavy Oils from Yablunivske Deposit. Chemistry, Technology and Application of Substances. 2020, 3 (1), 75-82. https://doi.org/10.23939/ctas2020.01.075
dc.relation.referencesen[30] ASTM D1298-12b. Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.
dc.relation.referencesen[31] EN ISO 3104. Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity.
dc.relation.referencesen[32] Topilnytskyy, P.; Paiuk, S.; Stebelska, H.; Romanchuk, V.; Yarmola, T. Technological Features of High-Sulfur Heavy Crude Oils Processing. Chem. Chem. Technol. 2019, 13 (4), 503-509. https://doi.org/10.23939/chcht13.04.503
dc.relation.referencesen[33] ASTM D95-13. Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
dc.relation.referencesen[34] ASTM D4294. Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry.
dc.relation.referencesen[35] ASTM D3230. Standard Test Method for Salts in Crude Oil (Electrometric Method).
dc.relation.referencesen[36] ASTM D974. Standard Test Method for Acid and Base Number by Color-Indicator Titration.
dc.relation.referencesen[37] ASTM D97. Standard Test Method for Pour Point of Petroleum Products.
dc.relation.referencesen[38] ASTM D2887. Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
dc.relation.referencesen[39] ASTM D5307. Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography.
dc.relation.referencesen[40] ASTM D6352. Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography.
dc.relation.referencesen[41] ASTM D938. Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum.
dc.relation.referencesen[42] ASTM D1321. Standard Test Method for Needle Penetration of Petroleum Waxes.
dc.relation.referencesen[43] EN 1426. Bitumen and bituminous binders - Determination of needle penetration.
dc.relation.referencesen[44] EN 1427. Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method.
dc.relation.referencesen[45] DSTU 8825:2019. Bitumen and bituminous binders. Determination of the ductility (National Standards of Ukraine).
dc.relation.referencesen[46] EN 12593. Bitumen and bituminous binders - Determination of the Fraass breaking point.
dc.relation.referencesen[47] Petroleum and related products. Determination of flash and fire points. Cleveland open cup method.
dc.relation.referencesen[48] EN 12607-1. Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method.
dc.relation.referencesen[49] Topilnytskyy, P.; Yarmola, T.; Romanchuk, V.; Kucinska-Lipka, J. Peculiarities of Dewatering Technology for Heavy High-Viscosity Crude Oils of Eastern Region of Ukraine. Chem. Chem. Technol. 2021, 15 (3),423-431.https://doi.org/10.23939/chcht15.03.423
dc.relation.referencesen[50] Topilnytskyy, P.; Romanchuk, V.; Boichenko, S.; Golych, Y. Physico-Chemical Properties and Efficiency of Demulsifiers Based on Block Copolymers of ethylene and Propylene Oxides. Chem. Chem. Technol. 2014, 8(2),211-218.https://doi.org/10.23939/chcht08.02.211
dc.relation.referencesen[51] EN 12591. Bitumen and bituminous binders - Specifications for paving grade bitumens.
dc.relation.referencesen[52] Standard of the Organization of Ukraine. http://online.budstandart.com/ru/catalog/doc-page.html?id_doc=84291
dc.relation.referencesen[53] Hrynyshyn, O.B.; Fryder, I.V. Metody oderzhannya naftovykh bitumiv na osnovi zalyshkiv pererobky parafinystykh naft. Vopr. Khimii i Khimicheskoi Tekhnologii 2013, 3, 109-111.
dc.relation.referencesen[54] Kataware Aniket, V.; Singh, D. Effects of Wax-Based, Chemical-Based, and Water-Based Warm-Mix Additives on Mechanical Performance of Asphalt Binders. J. Mater. Civ. Eng. 2018, 30, 04018237. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002441
dc.relation.referencesen[55] Synthetic wax. The Versatile Additive for Asphalt Mixes. https://www.syntheticwax.com/ (accessed on May 11, 2019).
dc.relation.referencesen[56] Edwards, Y.; Isacsson, U. Wax in Bitumen (Part II-Characterization and Effects). Road Mater. Pavement Des. 2005, 6, 439–468. https://doi.org/10.1080/14680629.2005.9690015
dc.relation.referencesen[57] SOU 42.1-37641918-068:2017. Bitumy dorozhni viazki, modyfikovani dobavkamy na osnovi voskiv. Tekhnichni umovy (National Standards of Ukraine).
dc.relation.urihttps://www.mordorintelligence.com/industry-reports/europe-modified-bitu..
dc.relation.urihttp://ropl-wh-live.sgcdev.io/wh3/news/france-tops-eurobitumes-european-..
dc.relation.urihttps://www.ibisworld.com/united-states/market-research-reports/asphalt-..
dc.relation.urihttps://www.gminsights.com/industry-analysis/bitumen-market
dc.relation.urihttps://doi.org/10.1016/j.conbuildmat.2020.121864
dc.relation.urihttps://emulsion.globecore.com/residual-asphalt-production
dc.relation.urihttps://doi.org/10.23939/chcht11.02.220
dc.relation.urihttps://www.britannica.com/science/heavy-oil/Tar-sands
dc.relation.urihttps://doi.org/10.1016/C2012-0-00598-4
dc.relation.urihttps://doi.org/10.23939/chcht14.03.220
dc.relation.urihttps://aet.in.ua/en/news/uverennyj-rost-rynok-bituma-v-avguste-dostig-1..
dc.relation.urihttps://doi.org/10.1016/j.eurpolymj.2018.10.049
dc.relation.urihttps://doi.org/10.5592/CO/CETRA.2018.737
dc.relation.urihttps://doi.org/10.23939/chcht15.02.274
dc.relation.urihttps://doi.org/10.23939/chcht15.04.608
dc.relation.urihttps://doi.org/10.23939/chcht16.01.142
dc.relation.urihttps://doi.org/10.1155/2018/7913527
dc.relation.urihttps://pavementinteractive.org/reference-desk/materials/asphalt/asphalt..
dc.relation.urihttps://doi.org/10.1016/j.trpro.2019.07.007
dc.relation.urihttps://doi.org/10.1080/14680629.2020.1808518
dc.relation.urihttps://doi.org/10.1007/978-3-030-57340-9_1
dc.relation.urihttps://doi.org/10.23939/chcht12.04.456
dc.relation.urihttps://doi.org/10.23939/chcht13.02.212
dc.relation.urihttps://doi.org/10.23939/chcht15.03.443
dc.relation.urihttps://doi.org/10.3390/ma15051774
dc.relation.urihttps://doi.org/10.23939/ctas2020.01.075
dc.relation.urihttps://doi.org/10.23939/chcht13.04.503
dc.relation.urihttps://doi.org/10.23939/chcht15.03.423
dc.relation.urihttps://doi.org/10.23939/chcht08.02.211
dc.relation.urihttp://online.budstandart.com/ru/catalog/doc-page.html?id_doc=84291
dc.relation.urihttps://doi.org/10.1061/(ASCE)MT.1943-5533.0002441
dc.relation.urihttps://www.syntheticwax.com/
dc.relation.urihttps://doi.org/10.1080/14680629.2005.9690015
dc.rights.holder© Національний університет “Львівська політехніка”, 2022
dc.rights.holder© Yarmola T., Topilnytskyy P., Gunka V., Tertyshna O., Romanchuk V., 2022
dc.subjectнафта високов’язка
dc.subjectбітум дистиляційний
dc.subjectмодифікатор
dc.subjectсинтетичний віск
dc.subjecthigh-viscosity crude oil
dc.subjectdistilled bitumen
dc.subjectmodifier
dc.subjectsynthetic wax
dc.titleProduction of Distilled Bitumen from High-Viscosity Crude Oils of Ukrainian Fields
dc.title.alternativeОдержання дистиляційних бітумів з високов’язких нафт українського родовища
dc.typeArticle

Files

Original bundle

Now showing 1 - 2 of 2
Thumbnail Image
Name:
2022v16n3_Yarmola_T-Production_of_Distilled_461-468.pdf
Size:
439.28 KB
Format:
Adobe Portable Document Format
Download
Thumbnail Image
Name:
2022v16n3_Yarmola_T-Production_of_Distilled_461-468__COVER.png
Size:
566.89 KB
Format:
Portable Network Graphics
Download

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.82 KB
Format:
Plain Text
Description:
Download

Collections

Chemistry & Chemical Technology. – 2022. – Vol. 16, No. 3