Optimization of Synthesis Conditions of Mercury Selenide Thin Films

Simple item page
dc.citation.epage296
dc.citation.issue3
dc.citation.spage290
dc.contributor.affiliationLviv Polytechnic National University
dc.contributor.authorSozanskyi, Martyn
dc.contributor.authorStadnik, Vitalii
dc.contributor.authorShapoval, Pavlo
dc.contributor.authorYatchyshyn, Iosyp
dc.contributor.authorGuminilovych, Ruslana
dc.contributor.authorShapoval, Stepan
dc.coverage.placenameЛьвів
dc.coverage.placenameLviv
dc.date.accessioned2024-01-09T08:54:39Z
dc.date.available2024-01-09T08:54:39Z
dc.date.created2020-03-16
dc.date.issued2020-03-16
dc.description.abstractНа скляних підкладках методом хімічного осадження отримані плівки меркурій селеніду (HgSe). Використано водні розчини меркурій(II) нітрату, натрію тіосульфату, натрію селеносульфату та тринатрій цитрату. Проведено рентгенофазовий та елементний аналіз зразка плівки. Досліджено вплив концентрації вихідних реагентів, тривалості та температури синтезу на масу плівок HgSe та обчислено товщину покриттів. Досліджено оптичні та морфологічні властивості покриття HgSe. Обговорено механізм осадження
dc.description.abstractThe mercury selenide (HgSe) films were obtained on glass substrates via the chemical deposition method. The aqueous solutions of mercury(II) nitrate, sodium thiosulfate, sodium selenosulfate and tri-sodium citrate were used. X-ray and elemental analysis of the film sample were made. The effect of initial reagents concentration, synthesis duration and temperature on the mass of HgSe films was investigated and coatings thickness was calculated. The optical and morphological properties of HgSe films were examined. The deposition mechanism is discussed.
dc.format.extent290-296
dc.format.pages7
dc.identifier.citationOptimization of Synthesis Conditions of Mercury Selenide Thin Films / Martyn Sozanskyi, Vitalii Stadnik, Pavlo Shapoval, Iosyp Yatchyshyn, Ruslana Guminilovych, Stepan Shapoval // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2020. — Vol 14. — No 3. — P. 290–296.
dc.identifier.citationenOptimization of Synthesis Conditions of Mercury Selenide Thin Films / Martyn Sozanskyi, Vitalii Stadnik, Pavlo Shapoval, Iosyp Yatchyshyn, Ruslana Guminilovych, Stepan Shapoval // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2020. — Vol 14. — No 3. — P. 290–296.
dc.identifier.doidoi.org/10.23939/chcht14.03.290
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/60679
dc.language.isoen
dc.publisherВидавництво Львівської політехніки
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofChemistry & Chemical Technology, 3 (14), 2020
dc.relation.references[1] Bazarganipour M., Sadri M., Davar D., Salavati-Niasari M.: Polyhedron, 2011, 30, 1103. https://doi.org/10.1016/j.poly.2011.01.023
dc.relation.references[2] Esmaeili-ZareM., Salavati-Niasari M., Sobhani A.: Ultrason. Sonochem., 2012, 19, 1079. https://doi.org/10.1016/j.ultsonch.2012.01.013
dc.relation.references[3] Pawar S., Pawar B., Kim J. et al.: Curr. Appl. Phys., 2011, 11, 117. https://doi.org/10.1016/j.cap.2010.07.007
dc.relation.references[4] Bansode S., Kapadnis R., Wagh V. et al.: Chem. Chem. Technol., 2014, 8, 441.
dc.relation.references[5] Sozanskyi M., Shapoval P., Chaykivska R. et al.: Visnyk Lviv. Polytech. Nats. Univ., 2016, 841, 36.
dc.relation.references[6] Shapoval P., Sozanskyi M., Yatchyshyn I. et al.: Odes’kyi Politechnichnyi Universytet. Pratsi., 2015, 3, 119. https://doi.org/10.15276/opu.3.47.2015.17
dc.relation.references[7] Shapoval P., Guminilovych R., Yatchyshyn I.: Chem. Chem. Technol., 2013, 7, 345. https://doi.org/10.23939/chcht07.03.345
dc.relation.references[8] Shapoval P., Sozanskyi M., Yatchyshyn I. et al.: Chem. Chem. Technol., 2016, 10, 317. https://doi.org/10.23939/chcht10.03.317
dc.relation.references[9] Shapoval P., Guminilovych R., Yatchyshyn I., Shapoval S.: Chem. Chem. Technol., 2015, 9, 287. https://doi.org/10.23939/chcht09.03.287
dc.relation.references[10] Sozanskyi M., Stadnik, V., Chaykivska, R. et al.: Voprosy Khimii i Khimicheskoi Tekhnologii, 2018, 4, 69.
dc.relation.references[11] Sozanskyi M., Stadnik V., Chaykivska R. et al.: Chem. Chem. Technol., 2017, 11, 445. https://doi.org/10.23939/chcht11.04.445
dc.relation.references[12] Kuntyi O., ShepidaM., Sus L. et al.: Chem. Chem. Technol., 2018, 12, 305. https://doi.org/10.23939/chcht12.03.305
dc.relation.references[13] Kraus W., Nolze G.: PowderCell for Windows (version 2.4). Federal Institute for Materials Research and Testing, Berlin 2000.
dc.relation.references[14] Stewart J.: Program Package МОРАС 2016. http://www.openmopac.net
dc.relation.references[15] Senda N.: Program Package Winmostar (version 8.001). http://winmostar.com
dc.relation.references[16] Pejova B., Najdoski M., Grozdanov I. et al.: J. Mater. Chem., 1999, 9, 2889. https://doi.org/10.1039/a905452i
dc.relation.references[17] Ranga Rao A., Dutta V.: Sol. EnergyMater. Sol. Cells., 2011, 95, 1050. https://doi.org/10.1016/j.solmat.2010.10.030
dc.relation.references[18] Howes P., GreenM., Johnston C. et al.: J. Mater. Chem., 2008, 18, 3474. https://doi.org/10.1039/b804158j
dc.relation.references[19]Maskaeva L., Markov V., Tulenin S. et al.: Gidrokhimicheskoe Osazhdenie Tonkikh Plenok KhalkogenidovMetallov: Praktikum. Izd-vo Uralskogo Univ., Ekaterinburg 2017.
dc.relation.referencesen[1] Bazarganipour M., Sadri M., Davar D., Salavati-Niasari M., Polyhedron, 2011, 30, 1103. https://doi.org/10.1016/j.poly.2011.01.023
dc.relation.referencesen[2] Esmaeili-ZareM., Salavati-Niasari M., Sobhani A., Ultrason. Sonochem., 2012, 19, 1079. https://doi.org/10.1016/j.ultsonch.2012.01.013
dc.relation.referencesen[3] Pawar S., Pawar B., Kim J. et al., Curr. Appl. Phys., 2011, 11, 117. https://doi.org/10.1016/j.cap.2010.07.007
dc.relation.referencesen[4] Bansode S., Kapadnis R., Wagh V. et al., Chem. Chem. Technol., 2014, 8, 441.
dc.relation.referencesen[5] Sozanskyi M., Shapoval P., Chaykivska R. et al., Visnyk Lviv. Polytech. Nats. Univ., 2016, 841, 36.
dc.relation.referencesen[6] Shapoval P., Sozanskyi M., Yatchyshyn I. et al., Odes’kyi Politechnichnyi Universytet. Pratsi., 2015, 3, 119. https://doi.org/10.15276/opu.3.47.2015.17
dc.relation.referencesen[7] Shapoval P., Guminilovych R., Yatchyshyn I., Chem. Chem. Technol., 2013, 7, 345. https://doi.org/10.23939/chcht07.03.345
dc.relation.referencesen[8] Shapoval P., Sozanskyi M., Yatchyshyn I. et al., Chem. Chem. Technol., 2016, 10, 317. https://doi.org/10.23939/chcht10.03.317
dc.relation.referencesen[9] Shapoval P., Guminilovych R., Yatchyshyn I., Shapoval S., Chem. Chem. Technol., 2015, 9, 287. https://doi.org/10.23939/chcht09.03.287
dc.relation.referencesen[10] Sozanskyi M., Stadnik, V., Chaykivska, R. et al., Voprosy Khimii i Khimicheskoi Tekhnologii, 2018, 4, 69.
dc.relation.referencesen[11] Sozanskyi M., Stadnik V., Chaykivska R. et al., Chem. Chem. Technol., 2017, 11, 445. https://doi.org/10.23939/chcht11.04.445
dc.relation.referencesen[12] Kuntyi O., ShepidaM., Sus L. et al., Chem. Chem. Technol., 2018, 12, 305. https://doi.org/10.23939/chcht12.03.305
dc.relation.referencesen[13] Kraus W., Nolze G., PowderCell for Windows (version 2.4). Federal Institute for Materials Research and Testing, Berlin 2000.
dc.relation.referencesen[14] Stewart J., Program Package MORAS 2016. http://www.openmopac.net
dc.relation.referencesen[15] Senda N., Program Package Winmostar (version 8.001). http://winmostar.com
dc.relation.referencesen[16] Pejova B., Najdoski M., Grozdanov I. et al., J. Mater. Chem., 1999, 9, 2889. https://doi.org/10.1039/a905452i
dc.relation.referencesen[17] Ranga Rao A., Dutta V., Sol. EnergyMater. Sol. Cells., 2011, 95, 1050. https://doi.org/10.1016/j.solmat.2010.10.030
dc.relation.referencesen[18] Howes P., GreenM., Johnston C. et al., J. Mater. Chem., 2008, 18, 3474. https://doi.org/10.1039/b804158j
dc.relation.referencesen[19]Maskaeva L., Markov V., Tulenin S. et al., Gidrokhimicheskoe Osazhdenie Tonkikh Plenok KhalkogenidovMetallov: Praktikum. Izd-vo Uralskogo Univ., Ekaterinburg 2017.
dc.relation.urihttps://doi.org/10.1016/j.poly.2011.01.023
dc.relation.urihttps://doi.org/10.1016/j.ultsonch.2012.01.013
dc.relation.urihttps://doi.org/10.1016/j.cap.2010.07.007
dc.relation.urihttps://doi.org/10.15276/opu.3.47.2015.17
dc.relation.urihttps://doi.org/10.23939/chcht07.03.345
dc.relation.urihttps://doi.org/10.23939/chcht10.03.317
dc.relation.urihttps://doi.org/10.23939/chcht09.03.287
dc.relation.urihttps://doi.org/10.23939/chcht11.04.445
dc.relation.urihttps://doi.org/10.23939/chcht12.03.305
dc.relation.urihttp://www.openmopac.net
dc.relation.urihttp://winmostar.com
dc.relation.urihttps://doi.org/10.1039/a905452i
dc.relation.urihttps://doi.org/10.1016/j.solmat.2010.10.030
dc.relation.urihttps://doi.org/10.1039/b804158j
dc.rights.holder© Національний університет “Львівська політехніка”, 2020
dc.rights.holder© Sozanskyi M., Stadnik V., Shapoval P., Yatchyshyn I., Guminilovych R., Shapoval S., 2020
dc.subjectмеркурій селенід
dc.subjectтонкі плівки
dc.subjectхімічне осадження
dc.subjectоптичні властивості
dc.subjectморфологічний аналіз
dc.subjectмеханізм росту
dc.subjectmercury selenide
dc.subjectthin films
dc.subjectchemical deposition
dc.subjectoptical properties
dc.subjectmorphology analysis
dc.subjectgrowth mechanism
dc.titleOptimization of Synthesis Conditions of Mercury Selenide Thin Films
dc.title.alternativeОптимізація умов синтезу тонких плівок меркурій селеніду
dc.typeArticle

Files

Original bundle

Now showing 1 - 2 of 2
Thumbnail Image
Name:
2020v14n3_Sozanskyi_M-Optimization_of_Synthesis_290-296.pdf
Size:
823.54 KB
Format:
Adobe Portable Document Format
Download
Thumbnail Image
Name:
2020v14n3_Sozanskyi_M-Optimization_of_Synthesis_290-296__COVER.png
Size:
524.72 KB
Format:
Portable Network Graphics
Download

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.83 KB
Format:
Plain Text
Description:
Download

Collections

Chemistry & Chemical Technology. – 2020. – Vol. 14, No. 3