Frequency response and strength analysis of the elbow orthosis planetary gearbox shaft using FEA

Simple item page
dc.citation.epage41
dc.citation.issue4
dc.citation.journalTitleУкраїнський журнал із машинобудування і матеріалознавства
dc.citation.spage27
dc.contributor.affiliationNational Technical University of Ukraine “Ihor Sikorsky Kyiv Polytechnic Institute”
dc.contributor.authorLavrenko, Iaroslav
dc.contributor.authorSushchenko, Maksym
dc.contributor.authorIshchenko, Oleksii
dc.coverage.placenameЛьвів
dc.coverage.placenameLviv
dc.date.accessioned2025-03-06T10:02:33Z
dc.date.created2023-02-28
dc.date.issued2023-02-28
dc.description.abstractShafts of various sizes are used in various fields of mechanical engineering, automotive, marine and aerospace industries to transmit torque according to requirements. In this paper, we simulate and analyse the modal and harmonic response of a shaft on which a satellite of a planetary gearbox for an elbow orthosis is mounted. The orthoses are used during the rehabilitation of patients in the postoperative period or during the regeneration of lost limb functions. Steel 45 and PLA polylactide were used in the shaft modelling. The planetary gearbox shaft was analysed for modal and harmonic characteristics at three different torque values, i. e. 1732 N·mm, 3464 N·mm, 5196 N·mm, using ANSYS Workbench. The modal and harmonic analysis of the shaft stress-strain state is calculated, completed comparative analysis, and the vibration characteristics are discussed: shown natural frequencies, mode shapes, and harmonic response. Calculations for shaft durability under a complex stress state were performed, and safety factors were calculated for shafts made of steel 45 and PLA polylactide.
dc.format.extent27-41
dc.format.pages15
dc.identifier.citationLavrenko I. Frequency response and strength analysis of the elbow orthosis planetary gearbox shaft using FEA / Iaroslav Lavrenko, Maksym Sushchenko, Oleksii Ishchenko // Ukrainian Journal of Mechanical Engineering and Materials Science. — Lviv : Lviv Politechnic Publishing House, 2023. — Vol 9. — No 4. — P. 27–41.
dc.identifier.citationenLavrenko I. Frequency response and strength analysis of the elbow orthosis planetary gearbox shaft using FEA / Iaroslav Lavrenko, Maksym Sushchenko, Oleksii Ishchenko // Ukrainian Journal of Mechanical Engineering and Materials Science. — Lviv : Lviv Politechnic Publishing House, 2023. — Vol 9. — No 4. — P. 27–41.
dc.identifier.doidoi.org/10.23939/ujmems2023.04.027
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/63999
dc.language.isoen
dc.publisherВидавництво Львівської політехніки
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofУкраїнський журнал із машинобудування і матеріалознавства, 4 (9), 2023
dc.relation.ispartofUkrainian Journal of Mechanical Engineering and Materials Science, 4 (9), 2023
dc.relation.references[1] N. Lenin Rakesh, et al., “Stress analysis of a shaft using Ansys”, Middle-east Journal of Scientific Research, 12 (12), ISSN 1990-9233, pp. 1726–1728, 2012.
dc.relation.references[2] P. Krishna Teja, et al., “Finite element analysis of propeller shaft for automotive and naval application”, International Research Journal of automotive Technology, Vol. 1, Issue 1, ISSN 2581-5865, pp. 8–12, 2018.
dc.relation.references[3] S. D. Dere, and L. Dhamande, “Rotor bearing system FEA analysis for misalignment”, International journal of advance research and innovative ideas in education, Vol. 3, Issue 4, pp. 2102–2112, 2017.
dc.relation.references[4] B. Gaikwad Rushikesh, and V. Gaur Abhay, “Static and dynamic analysis of shaft (EN24) of foot mounting motor using FEA”, International Journal of Innovations in Engineering Research and Technology, Vol. 5, Issue 6, ISSN: 2394-3696, pp. 57–70, 2018.
dc.relation.references[5] A. Asonja, et al., “Analysis of the static behavior of the shaft based on finite method under effect of different variants of load”, Applied Engineering Letters, Vol. 1, No. 1, pp. 8–15, ISSN: 2466-4847, 2016.
dc.relation.references[6] S. Noga, et al., “Analytical and numerical analysis of injection pump (Stepped) shaft vibrations using Timoshenko theory”, Acta mechanica et automatica, Vol. 16, no. 3, pp. 215–224, 2022.
dc.relation.references[7] P. B. Sob, “Modelling and simulating stress distribution on a centrifugal pump shaft during backpressure”, International Journal of Engineering Research and Technology, Vol. 13, No. 10, ISSN 0974-3154, pp. 2943–2954, 2020.
dc.relation.references[8] J. Joshi, et al., “Design analysis of shafts using simulation softwares”, International Journal of Scientific and Engineering Research, Vol. 5, Issue 8, ISSN 2229-5518, pp. 751–761, 2014.
dc.relation.references[9] N. Rasovic, et al., “Design and analysis of steel reel shaft by using FEA”, Tehnicki vjesnik, Vol. 26, Issue 2, pp. 527–532, 2019.
dc.relation.references[10] S. M. Ghoneam, et al., “Dynamic analysis of rotor system with active magnetic bearings using finite element method”, International Journal of Engineering Applied Sciences and Technology, Vol. 7, Issue 1, ISSN 2455-2143, pp. 09–16, 2022.
dc.relation.references[11] B. Thomas, et al., “Dynamic analysis of functionally graded shaft”, FME Transactions, Vol. 47, Issue 1, pp. 151–157, 2019.
dc.relation.references[12] M. J. Jweeg, et al., “Dynamic analysis of a rotating stepped shaft with and without defects”, IOP Conf. Series: Materials Science and Engineering, 3rd International Conference on Engineering Sciences, Kerbala, Iraq, Vol. 671, 2020.
dc.relation.references[13] R. Kurbet, V. Doddaswamy, C.M. Amruth, Mohammed Rafi H. Kerur, S. Ghanaraja, “Frequency response analysis of spur gear pair using FEA”, Materials Today: Proceedings, 52 (2022), pp. 2327–2338.
dc.relation.references[14] X. Liang, M. J. Zuo and W. Chen, “Dynamics-Based Vibration Signal Modeling for Tooth Fault Diagnosis of Planetary Gearboxes”, Fault diagmosis and Detection, 2017. http://dx.doi.org/10.5772/67529
dc.relation.references[15] J. Wang, Y. Wang and Z. Huo. Finite Element Residual Stress Analysis of Planetary Gear Tooth. Hindawi Publishing Corporation Advances in Mechanical Engineering, Vol. 2013, Article ID 761957, 12 p. http://dx.doi.org/10.1155/2013/761957
dc.relation.references[16] P. Silori, A. Shaikh, N. Kumar K. C., T. Tandon, “Finite Element Analysis of Traction gear using ANSYS”, Materials Today: Proceedings, 2, pp. 2236–2245, 2015.
dc.relation.references[17] S. Farah, D. G. Anderson, R. Langer, “Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review”, Advanced Drug Delivery Reviews, vol. 107, pp. 367–92, 2016. http://dx.doi.org/10.1016/J.ADDR.2016.06.012
dc.relation.references[18] M. Ouhsti, B. El Haddadi, S. Belhouideg, “Effect of Printing Parameters on the Mechanical Properties of Parts Fabricated with Open-Source 3D Printers in PLA by Fused Deposition Modeling”, Mechanics and Mechanical Engineering, Vol. 22, No. 4, pp. 895–907, 2018.
dc.relation.references[19] J. M. Reverte, M. A. Caminero, J. M. Chacon, E. Garcia-Plaza, P. J. Nunez and J. P. Becar, “Mechanical and Geometric Performance of PLA-Based Polymer Composites Processed by the Fused Filament Fabrication Additive Manufacturing Technique”, Materials, 13, 1924, 2020. DOI: 10.3390/ma13081924.
dc.relation.references[20] A. E. Babenko, M. I. Bobyr, O. O. Boronko, S. I. Trubachev, “Theory of vibrations and stability of motion: a collection of tasks for course design and practical classes for students of the training direction 6.050501 “Applied Mechanics”, NTUU “KPI”, 2010.
dc.relation.references[21] A. E. Sheinblit, “Course design of machine parts”, Yantar, 2002.
dc.relation.references[22] L. Safai, J.S. Cuellar, G. Smit, A.A. Zadpoor, “A review of the fatigue behavior of 3D printed polymers”, Additive Manufacturing, 28, pp. 87–97, 2019. https://doi.org/10.1016/j.addma.2019.03.023
dc.relation.referencesen[1] N. Lenin Rakesh, et al., "Stress analysis of a shaft using Ansys", Middle-east Journal of Scientific Research, 12 (12), ISSN 1990-9233, pp. 1726–1728, 2012.
dc.relation.referencesen[2] P. Krishna Teja, et al., "Finite element analysis of propeller shaft for automotive and naval application", International Research Journal of automotive Technology, Vol. 1, Issue 1, ISSN 2581-5865, pp. 8–12, 2018.
dc.relation.referencesen[3] S. D. Dere, and L. Dhamande, "Rotor bearing system FEA analysis for misalignment", International journal of advance research and innovative ideas in education, Vol. 3, Issue 4, pp. 2102–2112, 2017.
dc.relation.referencesen[4] B. Gaikwad Rushikesh, and V. Gaur Abhay, "Static and dynamic analysis of shaft (EN24) of foot mounting motor using FEA", International Journal of Innovations in Engineering Research and Technology, Vol. 5, Issue 6, ISSN: 2394-3696, pp. 57–70, 2018.
dc.relation.referencesen[5] A. Asonja, et al., "Analysis of the static behavior of the shaft based on finite method under effect of different variants of load", Applied Engineering Letters, Vol. 1, No. 1, pp. 8–15, ISSN: 2466-4847, 2016.
dc.relation.referencesen[6] S. Noga, et al., "Analytical and numerical analysis of injection pump (Stepped) shaft vibrations using Timoshenko theory", Acta mechanica et automatica, Vol. 16, no. 3, pp. 215–224, 2022.
dc.relation.referencesen[7] P. B. Sob, "Modelling and simulating stress distribution on a centrifugal pump shaft during backpressure", International Journal of Engineering Research and Technology, Vol. 13, No. 10, ISSN 0974-3154, pp. 2943–2954, 2020.
dc.relation.referencesen[8] J. Joshi, et al., "Design analysis of shafts using simulation softwares", International Journal of Scientific and Engineering Research, Vol. 5, Issue 8, ISSN 2229-5518, pp. 751–761, 2014.
dc.relation.referencesen[9] N. Rasovic, et al., "Design and analysis of steel reel shaft by using FEA", Tehnicki vjesnik, Vol. 26, Issue 2, pp. 527–532, 2019.
dc.relation.referencesen[10] S. M. Ghoneam, et al., "Dynamic analysis of rotor system with active magnetic bearings using finite element method", International Journal of Engineering Applied Sciences and Technology, Vol. 7, Issue 1, ISSN 2455-2143, pp. 09–16, 2022.
dc.relation.referencesen[11] B. Thomas, et al., "Dynamic analysis of functionally graded shaft", FME Transactions, Vol. 47, Issue 1, pp. 151–157, 2019.
dc.relation.referencesen[12] M. J. Jweeg, et al., "Dynamic analysis of a rotating stepped shaft with and without defects", IOP Conf. Series: Materials Science and Engineering, 3rd International Conference on Engineering Sciences, Kerbala, Iraq, Vol. 671, 2020.
dc.relation.referencesen[13] R. Kurbet, V. Doddaswamy, C.M. Amruth, Mohammed Rafi H. Kerur, S. Ghanaraja, "Frequency response analysis of spur gear pair using FEA", Materials Today: Proceedings, 52 (2022), pp. 2327–2338.
dc.relation.referencesen[14] X. Liang, M. J. Zuo and W. Chen, "Dynamics-Based Vibration Signal Modeling for Tooth Fault Diagnosis of Planetary Gearboxes", Fault diagmosis and Detection, 2017. http://dx.doi.org/10.5772/67529
dc.relation.referencesen[15] J. Wang, Y. Wang and Z. Huo. Finite Element Residual Stress Analysis of Planetary Gear Tooth. Hindawi Publishing Corporation Advances in Mechanical Engineering, Vol. 2013, Article ID 761957, 12 p. http://dx.doi.org/10.1155/2013/761957
dc.relation.referencesen[16] P. Silori, A. Shaikh, N. Kumar K. C., T. Tandon, "Finite Element Analysis of Traction gear using ANSYS", Materials Today: Proceedings, 2, pp. 2236–2245, 2015.
dc.relation.referencesen[17] S. Farah, D. G. Anderson, R. Langer, "Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review", Advanced Drug Delivery Reviews, vol. 107, pp. 367–92, 2016. http://dx.doi.org/10.1016/J.ADDR.2016.06.012
dc.relation.referencesen[18] M. Ouhsti, B. El Haddadi, S. Belhouideg, "Effect of Printing Parameters on the Mechanical Properties of Parts Fabricated with Open-Source 3D Printers in PLA by Fused Deposition Modeling", Mechanics and Mechanical Engineering, Vol. 22, No. 4, pp. 895–907, 2018.
dc.relation.referencesen[19] J. M. Reverte, M. A. Caminero, J. M. Chacon, E. Garcia-Plaza, P. J. Nunez and J. P. Becar, "Mechanical and Geometric Performance of PLA-Based Polymer Composites Processed by the Fused Filament Fabrication Additive Manufacturing Technique", Materials, 13, 1924, 2020. DOI: 10.3390/ma13081924.
dc.relation.referencesen[20] A. E. Babenko, M. I. Bobyr, O. O. Boronko, S. I. Trubachev, "Theory of vibrations and stability of motion: a collection of tasks for course design and practical classes for students of the training direction 6.050501 "Applied Mechanics", NTUU "KPI", 2010.
dc.relation.referencesen[21] A. E. Sheinblit, "Course design of machine parts", Yantar, 2002.
dc.relation.referencesen[22] L. Safai, J.S. Cuellar, G. Smit, A.A. Zadpoor, "A review of the fatigue behavior of 3D printed polymers", Additive Manufacturing, 28, pp. 87–97, 2019. https://doi.org/10.1016/j.addma.2019.03.023
dc.relation.urihttp://dx.doi.org/10.5772/67529
dc.relation.urihttp://dx.doi.org/10.1155/2013/761957
dc.relation.urihttp://dx.doi.org/10.1016/J.ADDR.2016.06.012
dc.relation.urihttps://doi.org/10.1016/j.addma.2019.03.023
dc.rights.holder© Національний університет “Львівська політехніка”, 2023
dc.rights.holder© Lavrenko I., Sushchenko M., Ishchenko O., 2023
dc.subjectGearbox
dc.subjectstress
dc.subjectdeformation
dc.subjectvibration
dc.subjectfrequency
dc.subjectfatigue
dc.subjectsafety factor
dc.subjectANSYS
dc.titleFrequency response and strength analysis of the elbow orthosis planetary gearbox shaft using FEA
dc.typeArticle

Files

Original bundle

Now showing 1 - 2 of 2
Thumbnail Image
Name:
2023v9n4_Lavrenko_I-Frequency_response_and_strength_27-41.pdf
Size:
11.66 MB
Format:
Adobe Portable Document Format
Download
Thumbnail Image
Name:
2023v9n4_Lavrenko_I-Frequency_response_and_strength_27-41__COVER.png
Size:
472.05 KB
Format:
Portable Network Graphics
Download

License bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.78 KB
Format:
Plain Text
Description:
Download

Collections

Ukrainian Journal of Mechanical Engineering and Materials Science. – 2023. – Vol. 9, No. 4