Development and Thermal Investigation of Modified Octadecanoic Acid as Energy Storage Material

Simple item page
dc.citation.epage622
dc.citation.issue4
dc.citation.journalTitleХімія та хімічна технологія
dc.citation.spage615
dc.contributor.affiliationUniversitas Pancasila
dc.contributor.affiliationPusat Riset Lingkungan dan Teknologi Bersih, Badan Riset dan Inovasi Nasional
dc.contributor.affiliationPoliteknik Negeri Bandung, Bandung Barat
dc.contributor.affiliationUniversitas Gadjah Mada
dc.contributor.authorRahman, Reza Abdu
dc.contributor.authorPlamonia, Nicco
dc.contributor.authorSetiawan, Dibyo
dc.contributor.authorPutra, Robertus Dhimas Dhewangga
dc.coverage.placenameЛьвів
dc.coverage.placenameLviv
dc.date.accessioned2026-03-26T07:38:22Z
dc.date.created2024-02-27
dc.date.issued2024-02-27
dc.description.abstractРозроблено та досліджено модифіковану октадеканову кислоту (МОК) як матеріал для зберігання енергії. Температурний перехід для МОК зменшено на 1,03 °C і 2,56 °C. У результаті МОК містить високу частку енергії в рідкій зоні, близько 25 % і 33,5 %, що ефективно підвищує рівень заряду системи зберігання.
dc.description.abstractModified octadecanoic acid (MOA) has been developed and studied as a material for energy storage. Temperature transition for MOA is reduced by 1.03 °C and 2.56 °C. As a result, MOA has a high energy fraction in the liquid zone, about 25 % and 33.5 %, which effectively increases the charge level of the storage system.
dc.format.extent615-622
dc.format.pages8
dc.identifier.citationDevelopment and Thermal Investigation of Modified Octadecanoic Acid as Energy Storage Material / Reza Abdu Rahman, Nicco Plamonia, Dibyo Setiawan, Robertus Dhimas Dhewangga Putra // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2024. — Vol 18. — No 4. — P. 615–622.
dc.identifier.citationenDevelopment and Thermal Investigation of Modified Octadecanoic Acid as Energy Storage Material / Reza Abdu Rahman, Nicco Plamonia, Dibyo Setiawan, Robertus Dhimas Dhewangga Putra // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2024. — Vol 18. — No 4. — P. 615–622.
dc.identifier.doidoi.org/10.23939/chcht18.04.615
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/124795
dc.language.isoen
dc.publisherВидавництво Львівської політехніки
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofХімія та хімічна технологія, 4 (18), 2024
dc.relation.ispartofChemistry & Chemical Technology, 4 (18), 2024
dc.relation.references[1] Ismail, I.; Rahman, R. A.; Haryanto, G.; Pane, E. A. The Optimal Pitch Distance for Maximizing the Power Ratio for Savonius Turbine on Inline Configuration. Int. J. Renew. Energy Res. 2021, 11, 595–599. https://dorl.net/dor/20.1001.1.13090127.2021.11.2.10.9
dc.relation.references[2] Suyitno, B. M.; Rahman, R. A.; Sukma, H.; Rahmalina, D. The Assessment of Reflector Material Durability for Concentrated Solar Power Based on Environment Exposure and Accelerated Aging Test. Eastern-European J. Enterp. Technol. 2022, 6 (12–120), 22–29. https://doi.org/10.15587/1729-4061.2022.265678
dc.relation.references[3] Khademi, A.; Abtahi Mehrjardi, S. A.; Tiari, S.; Mazaheri, K.; Shafii, M. B. Thermal Efficiency Improvement of Brayton Cycle in the Presence of Phase Change Material. Int. Conf. Fluid Flow, Heat Mass Transf. 2022, 135, 1–9. https://doi.org/10.11159/ffhmt22.135
dc.relation.references[4] Mohammad Firman, L. O.; Adji, R. B.; Ismail; Rahman, R. A. Increasing the Feasibility and Storage Property of Cellulose-Based Biomass by Forming Shape-Stabilized Briquette with Hydrophobic Compound. Case Stud. Chem. Environ. Eng. 2023, 8, 100443. https://doi.org/10.1016/j.cscee.2023.100443
dc.relation.references[5] Praveenkumar, T. R.; Sekar, M.; Pasupuleti, R. R.; Gavurová, B.; Arun Kumar, G.; Vignesh Kumar, M. Current Technologies for Plastic Waste Treatment for Energy Recovery, It’s Effects on Poly Aromatic Hydrocarbons Emission and Recycling Strategies. Fuel 2024, 357, 129379. https://doi.org/10.1016/j.fuel.2023.129379
dc.relation.references[6] Khademi, A.; Darbandi, M.; Schneider, G. E. Numerical Study to Optimize the Melting Process of Phase Change Material Coupled with Extra Fluid. AIAA Scitech 2020 Forum 2020, 1 PartF, 1–6. https://doi.org/10.2514/6.2020-1932
dc.relation.references[7] Ali, S.; Mehrjardi, A.; Khademi, A.; Fazli, M. Optimization of a Thermal Energy Storage System Enhanced with Fins Using Generative Adversarial Networks Method. Therm. Sci. Eng. Prog. 2024, 49, 102471. https://doi.org/10.1016/j.tsep.2024.102471
dc.relation.references[8] Suyitno, B. M.; Ismail, I.; Rahman, R. A. Improving the Performance of a Small-Scale Cascade Latent Heat Storage System by Using Gradual Melting Temperature Storage Tank. Case Stud. Therm. Eng. 2023, 45, 103034. https://doi.org/10.1016/j.csite.2023.103034
dc.relation.references[9] Dsilva Winfred Rufuss, D.; Rajkumar, V.; Suganthi, L.; Iniyan, S. Studies on Latent Heat Energy Storage (LHES) Materials for Solar Desalination Application-Focus on Material Properties, Prioritization, Selection and Future Research Potential. Sol. Energy Mater. Sol. Cells 2019, 189, 149–165. https://doi.org/10.1016/j.solmat.2018.09.031
dc.relation.references[10] Ismail, I.; Syahbana, M. S. L.; Rahman, R. A. Thermal Performance Assessment for an Active Latent Heat Storage Tank by Using Various Finned-Coil Heat Exchangers. Int. J. Heat Technol. 2022, 40, 1470–1477. https://doi.org/10.18280/ijht.400615
dc.relation.references[11] Khademi, A.; Favakeh, A.; Darbandi, M.; Shafii, M. B. Numerical and Experimental Study of Phase Change Material Melting Process in an Intermediate Fluid. In 7th International Conference on Energy Research and Development; ICERD 2019; pp. 16–23.
dc.relation.references[12] Yuan, Y.; Zhang, N.; Tao, W.; Cao, X.; He, Y. Fatty Acids as Phase Change Materials: A Review. Renew. Sustain. Energy Rev. 2014, 29, 482–498. https://doi.org/10.1016/j.rser.2013.08.107
dc.relation.references[13] Suyitno, B. M.; Pane, E. A.; Rahmalina, D.; Rahman, R. A. Improving the Operation and Thermal Response of Multiphase Coexistence Latent Storage System Using Stabilized Organic Phase Change Material. Results Eng. 2023, 18, 101210. https://doi.org/10.1016/j.rineng.2023.101210
dc.relation.references[14] Cao, X.; Zhang, R.; Zhang, N.; Chen, L.; Chen, D.; Li, X. Performance Improvement of Lauric Acid-1-Hexadecanol Eutectic Phase Change Material with Bio-Sourced Seashell Powder Addition for Thermal Energy Storage in Buildings. Constr. Build. Mater. 2023, 366, 130223. https://doi.org/10.1016/j.conbuildmat.2022.130223
dc.relation.references[15] Zhang, X.; Wang, X.; Zhong, C.; Lin, Q. Ultrathin-Wall Mesoporous Surface Carbon Foam Stabilized Stearic Acid as a Desirable Phase Change Material for Thermal Energy Storage. J. Ind. Eng. Chem. 2020, 85, 208–218. https://doi.org/10.1016/j.jiec.2020.02.003
dc.relation.references[16] Xie, B.; Li, C.; Chen, J.; Wang, N. Exfoliated 2D Hexagonal Boron Nitride Nanosheet Stabilized Stearic Acid as Composite Phase Change Materials for Thermal Energy Storage. Sol. Energy 2020, 204, 624–634. https://doi.org/10.1016/j.solener.2020.05.004
dc.relation.references[17] Zhao, X.; Li, C.; Bai, K.; Xie, B.; Chen, J.; Liu, Q. Multiple Structure Graphite Stabilized Stearic Acid as Composite Phase Change Materials for Thermal Energy Storage. Int. J. Min. Sci. Technol. 2022, 32, 1419–1428. https://doi.org/10.1016/j.ijmst.2022.10.003
dc.relation.references[18] Ao, C.; Yan, S.; Zhao, S.; Hu, W.; Zhao, L.; Wu, Y. Stearic Acid/Expanded Graphite Composite Phase Change Material with High Thermal Conductivity for Thermal Energy Storage. Energy Reports 2022, 8, 4834–4843. https://doi.org/10.1016/j.egyr.2022.03.172
dc.relation.references[19] Gandhi, M.; Kumar, A.; Elangovan, R.; Meena, C. S.; Kulkarni, K. S.; Kumar, A.; Bhanot, G.; Kapoor, N. R. A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings. Sustain. 2020, 12, 1–17. https://doi.org/10.3390/su12229481
dc.relation.references[20] Qu, Y.; Wang, S.; Tian, Y.; Zhou, D. Comprehensive Evaluation of Paraffin-HDPE Shape Stabilized PCM with Hybrid Carbon Nano-Additives. Appl. Therm. Eng. 2019, 163, 114404. https://doi.org/10.1016/j.applthermaleng.2019.114404
dc.relation.references[21] Sciacovelli, A.; Navarro, M. E.; Jin, Y.; Qiao, G.; Zheng, L.; Leng, G.; Wang, L.; Ding, Y. High Density Polyethylene (HDPE) – Graphite Composite Manufactured by Extrusion: A Novel Way to Fabricate Phase Change Materials for Thermal Energy Storage. Particuology 2018, 40, 131–140. https://doi.org/10.1016/j.partic.2017.11.011
dc.relation.references[22] Lv, Y.; Yang, X.; Li, X.; Zhang, G.; Wang, Z.; Yang, C. Experimental Study on a Novel Battery Thermal Management Technology Based on Low Density Polyethylene-Enhanced Composite Phase Change Materials Coupled with Low Fins. Appl. Energy 2016, 178, 376–382. https://doi.org/10.1016/j.apenergy.2016.06.058
dc.relation.references[23] Harmen, Y.; Chhiti, Y.; Alaoui, F. E. M. H.; Bentiss, F.; Elkhouakhi, M.; Deshayes, L.; Jama, C.; Duquesne, S.; Bensitel, M. Storage Efficiency of Paraffin-LDPE-MWCNT Phase Change Material for Industrial Building Applications. 2020 5th Int. Conf. Renew. Energies Dev. Countries, REDEC 2020 2020, 5, 1–6. https://doi.org/10.1109/REDEC49234.2020.9163856
dc.relation.references[24] Kyriaki, E.; Konstantinidou, C.; Giama, E.; Papadopoulos, A. M. Life Cycle Analysis (LCA) and Life Cycle Cost Analysis (LCCA) of Phase Change Materials (PCM) for Thermal Applications: A Review. Int. J. Energy Res. 2018, 42, 3068–3077. https://doi.org/10.1002/er.3945
dc.relation.references[25] Qu, Y.; Zhou, D.; Xue, F.; Cui, L. Multi-Factor Analysis on Thermal Comfort and Energy Saving Potential for PCM-Integrated Buildings in Summer. Energy Build. 2021, 241, 110966. https://doi.org/10.1016/j.enbuild.2021.110966
dc.relation.references[26] Weng, J.; Huang, Q.; Li, X.; Zhang, G.; Ouyang, D.; Chen, M.; Yuen, A. C. Y.; Li, A.; Lee, E. W. M.; Yang, W. et al. Safety Issue on PCM-Based Battery Thermal Management: Material Thermal Stability and System Hazard Mitigation. Energy Storage Mater. 2022, 53, 580–612. https://doi.org/10.1016/j.ensm.2022.09.007
dc.relation.references[27] Kim, S.; Seo, J.; Drzal, L. T. Improvement of Electric Conductivity of LLDPE Based Nanocomposite by Paraffin Coating on Exfoliated Graphite Nanoplatelets. Compos. Part A Appl. Sci. Manuf. 2010, 41, 581–587. https://doi.org/10.1016/j.compositesa.2009.05.002
dc.relation.references[28] Rahmalina, D.; Zada, A. R.; Soefihandini, H.; Ismail, I.; Suyitno, B. M. Analysis of the Thermal Characteristics of the Paraffin Wax/High-Density Polyethylene (HDPE) Composite as a Form-Stable Phase Change Material (FSPCM) for Thermal Energy Storage. Eastern-European J. Enterp. Technol. 2023, 1 (6 (121)), 6–13. https://doi.org/10.15587/1729-4061.2023.273437
dc.relation.references[29] Liu, C.; Xiao, T.; Zhao, J.; Liu, Q.; Sun, W.; Guo, C.; Ali, H. M.; Chen, X.; Rao, Z.; Gu, Y. Polymer Engineering in Phase Change Thermal Storage Materials. Renew. Sustain. Energy Rev. 2023, 188, 113814. https://doi.org/10.1016/j.rser.2023.113814
dc.relation.references[30] Stasevych, M.; Zvarych, V.; Dronik, M.; Sozanskyi, M.; Khomyak, S. Application of Infrared Spectroscopy and X-Ray Powder Diffractometry for Assessment of the Qualitative Composition of Components in a Pharmaceutical Formulation. Chem. Chem. Technol. 2023, 17, 510–517. https://doi.org/10.23939/chcht17.03.510
dc.relation.references[31] Ode, L.; Firman, M.; Rahmalina, D.; Rahman, R. A. Hybrid Energy-Temperature Method ( HETM ): A Low-Cost Apparatus and Reliable Method for Estimating the Thermal Capacity of Solid – Liquid Phase Change Material for Heat Storage System. HardwareX 2023, 16, e00496. https://doi.org/10.1016/j.ohx.2023.e00496
dc.relation.references[32] Abtahi Mehrjardi, S.A.; Khademi, A.; Said, Z.; Ushak, S.; Chamkha, A.J. Enhancing Latent Heat Storage Systems: The Impact of PCM Volumetric Ratios on Energy Storage Rates with Auxiliary Fluid Assistance. Energy Nexus 2023, 11, 100227. https://doi.org/10.1016/j.nexus.2023.100227
dc.relation.references[33] Muliawan, B.; Anggrainy, R.; Plamonia, N.; Abdu, R. Preliminary Characterization and Thermal Evaluation of a Direct Contact Cascaded Immiscible Inorganic Salt / High-Density Polyethylene as Moderate Temperature Heat Storage Material. Results Mater. 2023, 19, 100443. https://doi.org/10.1016/j.rinma.2023.100443
dc.relation.references[34] Bilonoga, Y.; Atamanyuk, V.; Stybel, V.; Dutsyak, I.; Drachuk, U. Improvement of the Method of Calculating Heat Transfer Coefficients Using Glycols Taking Into Account Surface Forces of Heat Carriers. Chem. Chem. Technol. 2023, 17, 608–616. https://doi.org/10.23939/chcht17.03.608
dc.relation.references[35] Wu, R.; Gao, W.; Zhou, Y.; Wang, Z.; Lin, Q. A Novel Three-Dimensional Network-Based Stearic Acid/Graphitized Carbon Foam Composite as High-Performance Shape-Stabilized Phase Change Material for Thermal Energy Storage. Compos. Part B Eng. 2021, 225, 109318. https://doi.org/10.1016/j.compositesb.2021.109318
dc.relation.references[36] Ouis, N.; Belarbi, A.; Mesli, S.; Benharrats, N. Improvement of Electrical Conductivity and Thermal Stability of Polyaniline-Maghnite Nanocomposites. Chem. Chem. Technol. 2023, 17, 118–125. https://doi.org/10.23939/chcht17.01.118
dc.relation.referencesen[1] Ismail, I.; Rahman, R. A.; Haryanto, G.; Pane, E. A. The Optimal Pitch Distance for Maximizing the Power Ratio for Savonius Turbine on Inline Configuration. Int. J. Renew. Energy Res. 2021, 11, 595–599. https://dorl.net/dor/20.1001.1.13090127.2021.11.2.10.9
dc.relation.referencesen[2] Suyitno, B. M.; Rahman, R. A.; Sukma, H.; Rahmalina, D. The Assessment of Reflector Material Durability for Concentrated Solar Power Based on Environment Exposure and Accelerated Aging Test. Eastern-European J. Enterp. Technol. 2022, 6 (12–120), 22–29. https://doi.org/10.15587/1729-4061.2022.265678
dc.relation.referencesen[3] Khademi, A.; Abtahi Mehrjardi, S. A.; Tiari, S.; Mazaheri, K.; Shafii, M. B. Thermal Efficiency Improvement of Brayton Cycle in the Presence of Phase Change Material. Int. Conf. Fluid Flow, Heat Mass Transf. 2022, 135, 1–9. https://doi.org/10.11159/ffhmt22.135
dc.relation.referencesen[4] Mohammad Firman, L. O.; Adji, R. B.; Ismail; Rahman, R. A. Increasing the Feasibility and Storage Property of Cellulose-Based Biomass by Forming Shape-Stabilized Briquette with Hydrophobic Compound. Case Stud. Chem. Environ. Eng. 2023, 8, 100443. https://doi.org/10.1016/j.cscee.2023.100443
dc.relation.referencesen[5] Praveenkumar, T. R.; Sekar, M.; Pasupuleti, R. R.; Gavurová, B.; Arun Kumar, G.; Vignesh Kumar, M. Current Technologies for Plastic Waste Treatment for Energy Recovery, It’s Effects on Poly Aromatic Hydrocarbons Emission and Recycling Strategies. Fuel 2024, 357, 129379. https://doi.org/10.1016/j.fuel.2023.129379
dc.relation.referencesen[6] Khademi, A.; Darbandi, M.; Schneider, G. E. Numerical Study to Optimize the Melting Process of Phase Change Material Coupled with Extra Fluid. AIAA Scitech 2020 Forum 2020, 1 PartF, 1–6. https://doi.org/10.2514/6.2020-1932
dc.relation.referencesen[7] Ali, S.; Mehrjardi, A.; Khademi, A.; Fazli, M. Optimization of a Thermal Energy Storage System Enhanced with Fins Using Generative Adversarial Networks Method. Therm. Sci. Eng. Prog. 2024, 49, 102471. https://doi.org/10.1016/j.tsep.2024.102471
dc.relation.referencesen[8] Suyitno, B. M.; Ismail, I.; Rahman, R. A. Improving the Performance of a Small-Scale Cascade Latent Heat Storage System by Using Gradual Melting Temperature Storage Tank. Case Stud. Therm. Eng. 2023, 45, 103034. https://doi.org/10.1016/j.csite.2023.103034
dc.relation.referencesen[9] Dsilva Winfred Rufuss, D.; Rajkumar, V.; Suganthi, L.; Iniyan, S. Studies on Latent Heat Energy Storage (LHES) Materials for Solar Desalination Application-Focus on Material Properties, Prioritization, Selection and Future Research Potential. Sol. Energy Mater. Sol. Cells 2019, 189, 149–165. https://doi.org/10.1016/j.solmat.2018.09.031
dc.relation.referencesen[10] Ismail, I.; Syahbana, M. S. L.; Rahman, R. A. Thermal Performance Assessment for an Active Latent Heat Storage Tank by Using Various Finned-Coil Heat Exchangers. Int. J. Heat Technol. 2022, 40, 1470–1477. https://doi.org/10.18280/ijht.400615
dc.relation.referencesen[11] Khademi, A.; Favakeh, A.; Darbandi, M.; Shafii, M. B. Numerical and Experimental Study of Phase Change Material Melting Process in an Intermediate Fluid. In 7th International Conference on Energy Research and Development; ICERD 2019; pp. 16–23.
dc.relation.referencesen[12] Yuan, Y.; Zhang, N.; Tao, W.; Cao, X.; He, Y. Fatty Acids as Phase Change Materials: A Review. Renew. Sustain. Energy Rev. 2014, 29, 482–498. https://doi.org/10.1016/j.rser.2013.08.107
dc.relation.referencesen[13] Suyitno, B. M.; Pane, E. A.; Rahmalina, D.; Rahman, R. A. Improving the Operation and Thermal Response of Multiphase Coexistence Latent Storage System Using Stabilized Organic Phase Change Material. Results Eng. 2023, 18, 101210. https://doi.org/10.1016/j.rineng.2023.101210
dc.relation.referencesen[14] Cao, X.; Zhang, R.; Zhang, N.; Chen, L.; Chen, D.; Li, X. Performance Improvement of Lauric Acid-1-Hexadecanol Eutectic Phase Change Material with Bio-Sourced Seashell Powder Addition for Thermal Energy Storage in Buildings. Constr. Build. Mater. 2023, 366, 130223. https://doi.org/10.1016/j.conbuildmat.2022.130223
dc.relation.referencesen[15] Zhang, X.; Wang, X.; Zhong, C.; Lin, Q. Ultrathin-Wall Mesoporous Surface Carbon Foam Stabilized Stearic Acid as a Desirable Phase Change Material for Thermal Energy Storage. J. Ind. Eng. Chem. 2020, 85, 208–218. https://doi.org/10.1016/j.jiec.2020.02.003
dc.relation.referencesen[16] Xie, B.; Li, C.; Chen, J.; Wang, N. Exfoliated 2D Hexagonal Boron Nitride Nanosheet Stabilized Stearic Acid as Composite Phase Change Materials for Thermal Energy Storage. Sol. Energy 2020, 204, 624–634. https://doi.org/10.1016/j.solener.2020.05.004
dc.relation.referencesen[17] Zhao, X.; Li, C.; Bai, K.; Xie, B.; Chen, J.; Liu, Q. Multiple Structure Graphite Stabilized Stearic Acid as Composite Phase Change Materials for Thermal Energy Storage. Int. J. Min. Sci. Technol. 2022, 32, 1419–1428. https://doi.org/10.1016/j.ijmst.2022.10.003
dc.relation.referencesen[18] Ao, C.; Yan, S.; Zhao, S.; Hu, W.; Zhao, L.; Wu, Y. Stearic Acid/Expanded Graphite Composite Phase Change Material with High Thermal Conductivity for Thermal Energy Storage. Energy Reports 2022, 8, 4834–4843. https://doi.org/10.1016/j.egyr.2022.03.172
dc.relation.referencesen[19] Gandhi, M.; Kumar, A.; Elangovan, R.; Meena, C. S.; Kulkarni, K. S.; Kumar, A.; Bhanot, G.; Kapoor, N. R. A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings. Sustain. 2020, 12, 1–17. https://doi.org/10.3390/su12229481
dc.relation.referencesen[20] Qu, Y.; Wang, S.; Tian, Y.; Zhou, D. Comprehensive Evaluation of Paraffin-HDPE Shape Stabilized PCM with Hybrid Carbon Nano-Additives. Appl. Therm. Eng. 2019, 163, 114404. https://doi.org/10.1016/j.applthermaleng.2019.114404
dc.relation.referencesen[21] Sciacovelli, A.; Navarro, M. E.; Jin, Y.; Qiao, G.; Zheng, L.; Leng, G.; Wang, L.; Ding, Y. High Density Polyethylene (HDPE) – Graphite Composite Manufactured by Extrusion: A Novel Way to Fabricate Phase Change Materials for Thermal Energy Storage. Particuology 2018, 40, 131–140. https://doi.org/10.1016/j.partic.2017.11.011
dc.relation.referencesen[22] Lv, Y.; Yang, X.; Li, X.; Zhang, G.; Wang, Z.; Yang, C. Experimental Study on a Novel Battery Thermal Management Technology Based on Low Density Polyethylene-Enhanced Composite Phase Change Materials Coupled with Low Fins. Appl. Energy 2016, 178, 376–382. https://doi.org/10.1016/j.apenergy.2016.06.058
dc.relation.referencesen[23] Harmen, Y.; Chhiti, Y.; Alaoui, F. E. M. H.; Bentiss, F.; Elkhouakhi, M.; Deshayes, L.; Jama, C.; Duquesne, S.; Bensitel, M. Storage Efficiency of Paraffin-LDPE-MWCNT Phase Change Material for Industrial Building Applications. 2020 5th Int. Conf. Renew. Energies Dev. Countries, REDEC 2020 2020, 5, 1–6. https://doi.org/10.1109/REDEC49234.2020.9163856
dc.relation.referencesen[24] Kyriaki, E.; Konstantinidou, C.; Giama, E.; Papadopoulos, A. M. Life Cycle Analysis (LCA) and Life Cycle Cost Analysis (LCCA) of Phase Change Materials (PCM) for Thermal Applications: A Review. Int. J. Energy Res. 2018, 42, 3068–3077. https://doi.org/10.1002/er.3945
dc.relation.referencesen[25] Qu, Y.; Zhou, D.; Xue, F.; Cui, L. Multi-Factor Analysis on Thermal Comfort and Energy Saving Potential for PCM-Integrated Buildings in Summer. Energy Build. 2021, 241, 110966. https://doi.org/10.1016/j.enbuild.2021.110966
dc.relation.referencesen[26] Weng, J.; Huang, Q.; Li, X.; Zhang, G.; Ouyang, D.; Chen, M.; Yuen, A. C. Y.; Li, A.; Lee, E. W. M.; Yang, W. et al. Safety Issue on PCM-Based Battery Thermal Management: Material Thermal Stability and System Hazard Mitigation. Energy Storage Mater. 2022, 53, 580–612. https://doi.org/10.1016/j.ensm.2022.09.007
dc.relation.referencesen[27] Kim, S.; Seo, J.; Drzal, L. T. Improvement of Electric Conductivity of LLDPE Based Nanocomposite by Paraffin Coating on Exfoliated Graphite Nanoplatelets. Compos. Part A Appl. Sci. Manuf. 2010, 41, 581–587. https://doi.org/10.1016/j.compositesa.2009.05.002
dc.relation.referencesen[28] Rahmalina, D.; Zada, A. R.; Soefihandini, H.; Ismail, I.; Suyitno, B. M. Analysis of the Thermal Characteristics of the Paraffin Wax/High-Density Polyethylene (HDPE) Composite as a Form-Stable Phase Change Material (FSPCM) for Thermal Energy Storage. Eastern-European J. Enterp. Technol. 2023, 1 (6 (121)), 6–13. https://doi.org/10.15587/1729-4061.2023.273437
dc.relation.referencesen[29] Liu, C.; Xiao, T.; Zhao, J.; Liu, Q.; Sun, W.; Guo, C.; Ali, H. M.; Chen, X.; Rao, Z.; Gu, Y. Polymer Engineering in Phase Change Thermal Storage Materials. Renew. Sustain. Energy Rev. 2023, 188, 113814. https://doi.org/10.1016/j.rser.2023.113814
dc.relation.referencesen[30] Stasevych, M.; Zvarych, V.; Dronik, M.; Sozanskyi, M.; Khomyak, S. Application of Infrared Spectroscopy and X-Ray Powder Diffractometry for Assessment of the Qualitative Composition of Components in a Pharmaceutical Formulation. Chem. Chem. Technol. 2023, 17, 510–517. https://doi.org/10.23939/chcht17.03.510
dc.relation.referencesen[31] Ode, L.; Firman, M.; Rahmalina, D.; Rahman, R. A. Hybrid Energy-Temperature Method ( HETM ): A Low-Cost Apparatus and Reliable Method for Estimating the Thermal Capacity of Solid – Liquid Phase Change Material for Heat Storage System. HardwareX 2023, 16, e00496. https://doi.org/10.1016/j.ohx.2023.e00496
dc.relation.referencesen[32] Abtahi Mehrjardi, S.A.; Khademi, A.; Said, Z.; Ushak, S.; Chamkha, A.J. Enhancing Latent Heat Storage Systems: The Impact of PCM Volumetric Ratios on Energy Storage Rates with Auxiliary Fluid Assistance. Energy Nexus 2023, 11, 100227. https://doi.org/10.1016/j.nexus.2023.100227
dc.relation.referencesen[33] Muliawan, B.; Anggrainy, R.; Plamonia, N.; Abdu, R. Preliminary Characterization and Thermal Evaluation of a Direct Contact Cascaded Immiscible Inorganic Salt, High-Density Polyethylene as Moderate Temperature Heat Storage Material. Results Mater. 2023, 19, 100443. https://doi.org/10.1016/j.rinma.2023.100443
dc.relation.referencesen[34] Bilonoga, Y.; Atamanyuk, V.; Stybel, V.; Dutsyak, I.; Drachuk, U. Improvement of the Method of Calculating Heat Transfer Coefficients Using Glycols Taking Into Account Surface Forces of Heat Carriers. Chem. Chem. Technol. 2023, 17, 608–616. https://doi.org/10.23939/chcht17.03.608
dc.relation.referencesen[35] Wu, R.; Gao, W.; Zhou, Y.; Wang, Z.; Lin, Q. A Novel Three-Dimensional Network-Based Stearic Acid/Graphitized Carbon Foam Composite as High-Performance Shape-Stabilized Phase Change Material for Thermal Energy Storage. Compos. Part B Eng. 2021, 225, 109318. https://doi.org/10.1016/j.compositesb.2021.109318
dc.relation.referencesen[36] Ouis, N.; Belarbi, A.; Mesli, S.; Benharrats, N. Improvement of Electrical Conductivity and Thermal Stability of Polyaniline-Maghnite Nanocomposites. Chem. Chem. Technol. 2023, 17, 118–125. https://doi.org/10.23939/chcht17.01.118
dc.relation.urihttps://dorl.net/dor/20.1001.1.13090127.2021.11.2.10.9
dc.relation.urihttps://doi.org/10.15587/1729-4061.2022.265678
dc.relation.urihttps://doi.org/10.11159/ffhmt22.135
dc.relation.urihttps://doi.org/10.1016/j.cscee.2023.100443
dc.relation.urihttps://doi.org/10.1016/j.fuel.2023.129379
dc.relation.urihttps://doi.org/10.2514/6.2020-1932
dc.relation.urihttps://doi.org/10.1016/j.tsep.2024.102471
dc.relation.urihttps://doi.org/10.1016/j.csite.2023.103034
dc.relation.urihttps://doi.org/10.1016/j.solmat.2018.09.031
dc.relation.urihttps://doi.org/10.18280/ijht.400615
dc.relation.urihttps://doi.org/10.1016/j.rser.2013.08.107
dc.relation.urihttps://doi.org/10.1016/j.rineng.2023.101210
dc.relation.urihttps://doi.org/10.1016/j.conbuildmat.2022.130223
dc.relation.urihttps://doi.org/10.1016/j.jiec.2020.02.003
dc.relation.urihttps://doi.org/10.1016/j.solener.2020.05.004
dc.relation.urihttps://doi.org/10.1016/j.ijmst.2022.10.003
dc.relation.urihttps://doi.org/10.1016/j.egyr.2022.03.172
dc.relation.urihttps://doi.org/10.3390/su12229481
dc.relation.urihttps://doi.org/10.1016/j.applthermaleng.2019.114404
dc.relation.urihttps://doi.org/10.1016/j.partic.2017.11.011
dc.relation.urihttps://doi.org/10.1016/j.apenergy.2016.06.058
dc.relation.urihttps://doi.org/10.1109/REDEC49234.2020.9163856
dc.relation.urihttps://doi.org/10.1002/er.3945
dc.relation.urihttps://doi.org/10.1016/j.enbuild.2021.110966
dc.relation.urihttps://doi.org/10.1016/j.ensm.2022.09.007
dc.relation.urihttps://doi.org/10.1016/j.compositesa.2009.05.002
dc.relation.urihttps://doi.org/10.15587/1729-4061.2023.273437
dc.relation.urihttps://doi.org/10.1016/j.rser.2023.113814
dc.relation.urihttps://doi.org/10.23939/chcht17.03.510
dc.relation.urihttps://doi.org/10.1016/j.ohx.2023.e00496
dc.relation.urihttps://doi.org/10.1016/j.nexus.2023.100227
dc.relation.urihttps://doi.org/10.1016/j.rinma.2023.100443
dc.relation.urihttps://doi.org/10.23939/chcht17.03.608
dc.relation.urihttps://doi.org/10.1016/j.compositesb.2021.109318
dc.relation.urihttps://doi.org/10.23939/chcht17.01.118
dc.rights.holder© Національний університет “Львівська політехніка”, 2024
dc.rights.holder© Rahman R. A., Plamonia N., Setiawan D., Putra R. D. D., 2024
dc.subjectжирні кислоти
dc.subjectнезмішуваність
dc.subjectфазова стабілізація
dc.subjectтермоакумуляція
dc.subjectfatty acids
dc.subjectimmiscibility
dc.subjectphase stabilization
dc.subjectthermal storage
dc.titleDevelopment and Thermal Investigation of Modified Octadecanoic Acid as Energy Storage Material
dc.title.alternativeРозроблення та термічні дослідження модифікованої октадеканової кислоти як матеріалу для зберігання енергії
dc.typeArticle

Files

Original bundle

Now showing 1 - 2 of 2
Thumbnail Image
Name:
2024v18n4_Rahman_R_A-Development_and_Thermal_615-622.pdf
Size:
544.49 KB
Format:
Adobe Portable Document Format
Download
Thumbnail Image
Name:
2024v18n4_Rahman_R_A-Development_and_Thermal_615-622__COVER.png
Size:
545.54 KB
Format:
Portable Network Graphics
Download

License bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.81 KB
Format:
Plain Text
Description:
Download

Collections

Chemistry & Chemical Technology. – 2024. – Vol. 18, No. 4