Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues.4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products
dc.citation.epage | 149 | |
dc.citation.issue | 1 | |
dc.citation.spage | 142 | |
dc.contributor.affiliation | Lviv Polytechnic National University | |
dc.contributor.author | Gunka, Volodymyr | |
dc.contributor.author | Bilushchak, Halyna | |
dc.contributor.author | Prysiazhnyi, Yuriy | |
dc.contributor.author | Demchuk, Yuriy | |
dc.contributor.author | Hrynchuk, Yurii | |
dc.contributor.author | Sidun, Iurii | |
dc.contributor.author | Shyshchak, Olena | |
dc.contributor.author | Bratychak, Michael | |
dc.coverage.placename | Львів | |
dc.coverage.placename | Lviv | |
dc.date.accessioned | 2024-01-22T10:41:30Z | |
dc.date.available | 2024-01-22T10:41:30Z | |
dc.date.created | 2022-03-16 | |
dc.date.issued | 2022-03-16 | |
dc.description.abstract | Досліджено вплив чинників на перебіг процесу хімічного модифікування гудрону формальдегідом з використанням як каталізатора сульфатної кислоти. Використовуючи експериментальні дані, розроблено адекватну експериментально-статистичну математичну (ЕСМ) модель та на її основі встановлено оптимальні значення чинників процесу хімічного модифікування гудрону формальдегідом з використанням як каталізатора сульфатної кислоти, які забезпечують оптимальні значення пенетрації та температури розм’якшеності модифікованих залишків. Порівняно прогнозовані на основі ЕСМ та практичні дані процесу модифікування залишків. | |
dc.description.abstract | The effect of factors on the process of chemical modification of tar with formaldehyde using a sulfuric acid as the catalyst has been studied. By using experimental results, the adequate statistical-mathematical (ESM) model has been developed. Based on this model, the optimal values on the process of chemical modification of tar with formaldehyde using a sulfuric acid as the catalyst have been identified, bringing about optimal penetration value and softening point of the modified tars. Data predicted on the basis of the ESM model were compared with empirical evidence about modified tars preparation. | |
dc.format.extent | 142-149 | |
dc.format.pages | 8 | |
dc.identifier.citation | Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues.4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products / Volodymyr Gunka, Halyna Bilushchak, Yuriy Prysiazhnyi, Yuriy Demchuk, Yurii Hrynchuk, Iurii Sidun, Olena Shyshchak, Michael Bratychak // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2022. — Vol 16. — No 1. — P. 142–149. | |
dc.identifier.citationen | Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues.4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products / Volodymyr Gunka, Halyna Bilushchak, Yuriy Prysiazhnyi, Yuriy Demchuk, Yurii Hrynchuk, Iurii Sidun, Olena Shyshchak, Michael Bratychak // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2022. — Vol 16. — No 1. — P. 142–149. | |
dc.identifier.doi | doi.org/10.23939/chcht16.01.142 | |
dc.identifier.uri | https://ena.lpnu.ua/handle/ntb/60951 | |
dc.language.iso | en | |
dc.publisher | Видавництво Львівської політехніки | |
dc.publisher | Lviv Politechnic Publishing House | |
dc.relation.ispartof | Chemistry & Chemical Technology, 1 (16), 2022 | |
dc.relation.references | [1] Muneraa, J.C.; Ossa, E.A. Polymer Modified Bitumen: Optimization and Selection. Mater. Design2016, 62, 91-97.https://doi.org/10.1016/j.matdes.2014.05.009 | |
dc.relation.references | [2] Pyshyev, S.;Gunka, V.;Grytsenko, Yu.; Bratychak, M. Polymer Modified Bitumen: Review. Chem. Chem. Technol. 2016, 10 (4s), 631-636. https://doi.org/10.23939/chcht10.04si.631 | |
dc.relation.references | [3] Gorkem, C., Sengoz, B. Predicting Stripping and Moisture Induced Damage of Asphalt Concrete Prepared with Polymer Modified Bitumen and Hydrated Lime. Constr. Build. Mater.2009, 23 (6), 2227-2236.https://doi.org/10.1016/j.conbuildmat.2008.12.001 | |
dc.relation.references | [4] Brozyna, D., Kowalski, K.J. Assestment of Polyethylene-Modified Bitumen Adhesion Using Computer Image Analysis. Arch. Civ. Eng.2016, LXII (4), 3-18.https://doi.org/10.1515/ace-2015-0106 | |
dc.relation.references | [5] Zielinski, K.; Babiak, M.; Ratajczak, M.; Kosno, J. Impact of Chemical and Physical Modification on Thermoplastic Characteristics of Bitumen. Procedia Eng. 2017, 172, 1297-1304.https://doi.org/10.1016/j.proeng.2017.02.159 | |
dc.relation.references | [6] Nagurskyy, A.; Khlibyshyn, Y.; Grynyshyn, O.; Kochubei, V. Rubber Crumb Modified Bitumen Produced from Crude Oil Residuals of Ukrainian Deposits.Chem. Chem. Technol.2020, 14 (4) 420-425. https://doi.org/10.23939/chcht14.03.420 | |
dc.relation.references | [7] Ibrahim, M. R.;Katman, H. Y.; Karim, M. R.;Koting, S.;Mashaan, N. S. A Review on the Effect of Crumb Rubber Addition to the Rheology of Crumb Rubber Modified Bitumen. Adv.Mater. Sci. Eng. 2013, 2013,1-8. https://doi.org/10.1155/2013/415246 | |
dc.relation.references | [8] Bratychak, M.;Chervinskyy, T.;Astakhova, O.; Shyshchak, O.Bitumen Production via Tar Oxidation in the Presence of Petroleum Resin with Fluorine-Containing Groups. Chem. Chem. Technol. 2010, 4, 325-328. https://doi.org/10.23939/chcht04.04.325 | |
dc.relation.references | [9] Grynyshyn, O.;Bratychak, M.;Krynytskiy, V.; Donchak, V. Petroleum Resins for Bitumens Modification. Chem. Chem. Technol. 2008, 2, 47-53.https://doi.org/10.23939/chcht02.01.047 | |
dc.relation.references | [10] Strap, G.;Astakhova, O.;Lazorko, O.; Shyshchak, O.; Bratychak, M.Modified Phenol-Formaldehyde Resins and Their Application in Bitumen-Polymeric Mixtures. Chem. Chem. Technol. 2013, 7, 279-287. https://doi.org/10.23939/chcht07.03.279 | |
dc.relation.references | [11] Bratychak, M.;Iatsyshyn, O.;Shyshchak, O.; Astakhova, O.; Janik, H.Carboxy Derivative of DioxydiphenylpropaneDiglycidyl Ether Monomethacrylate as an Additive for Composites.Chem. Chem. Technol, 2017, 11, 49-54. https://doi.org/10.23939/chcht11.01.049 | |
dc.relation.references | [12] Sidun, I.;Solodkyy, S.; Shved, M.; Astakhova, O.; Shyshchak, O.; Bratychak, M.Obtaining of Coumarone-Indene Resins based on Light Fraction of Coal Tar. 5. Emulsions on the Basis of Bitumen Modified by Coumarone-Indene Resins with Epoxy Groups. Chem. Chem. Technol.2019, 13, 489-494. https://doi.org/10.23939/chcht13.04.489 | |
dc.relation.references | [13] Demchuk, Y.;Gunka, V.;Pyshyev, S.; Sidun, I.; Hrynchuk, Y.; Kucinska-Lipka, J.; Bratychak, M.Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin. Chem. Chem. Technol. 2020, 14, 251-256. https://doi.org/10.23939/chcht14.02.251 | |
dc.relation.references | [14] Demchuk, Y.;Gunka, V.;Sidun, I.;Solodkyy, S. Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials.Proc. of EcoComfort.2020, 100, 95-102https://doi.org/10.1007/978-3-030-57340-9_1 | |
dc.relation.references | [15] Gunka, V.;Demchuk, Y.;Sidun, I.;Miroshnichenko, D.;Nyakuma, B.B.; Pyshyev, S. Application of phenol-cresol-formaldehyde resin as an adhesion promoter for bitumen and asphalt concrete. Road Mater. Pavement Des.2020, 22(12),2906-2918.https://doi.org/10.1080/14680629.2020.1808518 | |
dc.relation.references | [16] Bratychak, M.; Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 1. Effect of Solvent Nature on the Properties of Petroleum Residues Modified with Folmaldehyde.Chem. Chem. Technol. 2021, 15 (2), 274-283. https://doi.org/10.23939/chcht15.02.274 | |
dc.relation.references | [17] Gunka, V.; Demchuk, Y.; Sidun, I.; Kochubei, V.; Shved. M.;Romanchuk, V.; Korchak, B. Chemical modification of road oil bitumens by formaldehyde.Pet. Coal.2020, 62(1), 420-429. | |
dc.relation.references | [18] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Bitumen Modified with Maleic Anhydride. Chem. Chem. Technol. 2021, 15 (3), 443-449. https://doi.org/10.23939/chcht15.03.443 | |
dc.relation.references | [19] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Poliak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Tar Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15 (4), 608-620.https://doi.org/10.23939/chcht15.04.608 | |
dc.relation.references | [20] Singh, B.; Lokesh, K.; Gupta, M.; Chauhan, G.S. Polymer-Modified Bitumen of Recycled LDPE and Maleated Bitumen. J. Appl. Polym. Sci.2013, 127, 67-78. https://doi.org/10.1002/app.36810 | |
dc.relation.references | [21] Tsegelyk, G.G. OsnovyEkonometrii; Vydavnutsvo LNU im. Franka: Lviv, 2011. | |
dc.relation.references | [22] Bolshev, L.N.; Smirnov, N.B. TablitsyMatematicheskoiStatistiki; Nauka: Moskva, 1983. | |
dc.relation.referencesen | [1] Muneraa, J.C.; Ossa, E.A. Polymer Modified Bitumen: Optimization and Selection. Mater. Design2016, 62, 91-97.https://doi.org/10.1016/j.matdes.2014.05.009 | |
dc.relation.referencesen | [2] Pyshyev, S.;Gunka, V.;Grytsenko, Yu.; Bratychak, M. Polymer Modified Bitumen: Review. Chem. Chem. Technol. 2016, 10 (4s), 631-636. https://doi.org/10.23939/chcht10.04si.631 | |
dc.relation.referencesen | [3] Gorkem, C., Sengoz, B. Predicting Stripping and Moisture Induced Damage of Asphalt Concrete Prepared with Polymer Modified Bitumen and Hydrated Lime. Constr. Build. Mater.2009, 23 (6), 2227-2236.https://doi.org/10.1016/j.conbuildmat.2008.12.001 | |
dc.relation.referencesen | [4] Brozyna, D., Kowalski, K.J. Assestment of Polyethylene-Modified Bitumen Adhesion Using Computer Image Analysis. Arch. Civ. Eng.2016, LXII (4), 3-18.https://doi.org/10.1515/ace-2015-0106 | |
dc.relation.referencesen | [5] Zielinski, K.; Babiak, M.; Ratajczak, M.; Kosno, J. Impact of Chemical and Physical Modification on Thermoplastic Characteristics of Bitumen. Procedia Eng. 2017, 172, 1297-1304.https://doi.org/10.1016/j.proeng.2017.02.159 | |
dc.relation.referencesen | [6] Nagurskyy, A.; Khlibyshyn, Y.; Grynyshyn, O.; Kochubei, V. Rubber Crumb Modified Bitumen Produced from Crude Oil Residuals of Ukrainian Deposits.Chem. Chem. Technol.2020, 14 (4) 420-425. https://doi.org/10.23939/chcht14.03.420 | |
dc.relation.referencesen | [7] Ibrahim, M. R.;Katman, H. Y.; Karim, M. R.;Koting, S.;Mashaan, N. S. A Review on the Effect of Crumb Rubber Addition to the Rheology of Crumb Rubber Modified Bitumen. Adv.Mater. Sci. Eng. 2013, 2013,1-8. https://doi.org/10.1155/2013/415246 | |
dc.relation.referencesen | [8] Bratychak, M.;Chervinskyy, T.;Astakhova, O.; Shyshchak, O.Bitumen Production via Tar Oxidation in the Presence of Petroleum Resin with Fluorine-Containing Groups. Chem. Chem. Technol. 2010, 4, 325-328. https://doi.org/10.23939/chcht04.04.325 | |
dc.relation.referencesen | [9] Grynyshyn, O.;Bratychak, M.;Krynytskiy, V.; Donchak, V. Petroleum Resins for Bitumens Modification. Chem. Chem. Technol. 2008, 2, 47-53.https://doi.org/10.23939/chcht02.01.047 | |
dc.relation.referencesen | [10] Strap, G.;Astakhova, O.;Lazorko, O.; Shyshchak, O.; Bratychak, M.Modified Phenol-Formaldehyde Resins and Their Application in Bitumen-Polymeric Mixtures. Chem. Chem. Technol. 2013, 7, 279-287. https://doi.org/10.23939/chcht07.03.279 | |
dc.relation.referencesen | [11] Bratychak, M.;Iatsyshyn, O.;Shyshchak, O.; Astakhova, O.; Janik, H.Carboxy Derivative of DioxydiphenylpropaneDiglycidyl Ether Monomethacrylate as an Additive for Composites.Chem. Chem. Technol, 2017, 11, 49-54. https://doi.org/10.23939/chcht11.01.049 | |
dc.relation.referencesen | [12] Sidun, I.;Solodkyy, S.; Shved, M.; Astakhova, O.; Shyshchak, O.; Bratychak, M.Obtaining of Coumarone-Indene Resins based on Light Fraction of Coal Tar. 5. Emulsions on the Basis of Bitumen Modified by Coumarone-Indene Resins with Epoxy Groups. Chem. Chem. Technol.2019, 13, 489-494. https://doi.org/10.23939/chcht13.04.489 | |
dc.relation.referencesen | [13] Demchuk, Y.;Gunka, V.;Pyshyev, S.; Sidun, I.; Hrynchuk, Y.; Kucinska-Lipka, J.; Bratychak, M.Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin. Chem. Chem. Technol. 2020, 14, 251-256. https://doi.org/10.23939/chcht14.02.251 | |
dc.relation.referencesen | [14] Demchuk, Y.;Gunka, V.;Sidun, I.;Solodkyy, S. Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials.Proc. of EcoComfort.2020, 100, 95-102https://doi.org/10.1007/978-3-030-57340-9_1 | |
dc.relation.referencesen | [15] Gunka, V.;Demchuk, Y.;Sidun, I.;Miroshnichenko, D.;Nyakuma, B.B.; Pyshyev, S. Application of phenol-cresol-formaldehyde resin as an adhesion promoter for bitumen and asphalt concrete. Road Mater. Pavement Des.2020, 22(12),2906-2918.https://doi.org/10.1080/14680629.2020.1808518 | |
dc.relation.referencesen | [16] Bratychak, M.; Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 1. Effect of Solvent Nature on the Properties of Petroleum Residues Modified with Folmaldehyde.Chem. Chem. Technol. 2021, 15 (2), 274-283. https://doi.org/10.23939/chcht15.02.274 | |
dc.relation.referencesen | [17] Gunka, V.; Demchuk, Y.; Sidun, I.; Kochubei, V.; Shved. M.;Romanchuk, V.; Korchak, B. Chemical modification of road oil bitumens by formaldehyde.Pet. Coal.2020, 62(1), 420-429. | |
dc.relation.referencesen | [18] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Bitumen Modified with Maleic Anhydride. Chem. Chem. Technol. 2021, 15 (3), 443-449. https://doi.org/10.23939/chcht15.03.443 | |
dc.relation.referencesen | [19] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Poliak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Tar Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15 (4), 608-620.https://doi.org/10.23939/chcht15.04.608 | |
dc.relation.referencesen | [20] Singh, B.; Lokesh, K.; Gupta, M.; Chauhan, G.S. Polymer-Modified Bitumen of Recycled LDPE and Maleated Bitumen. J. Appl. Polym. Sci.2013, 127, 67-78. https://doi.org/10.1002/app.36810 | |
dc.relation.referencesen | [21] Tsegelyk, G.G. OsnovyEkonometrii; Vydavnutsvo LNU im. Franka: Lviv, 2011. | |
dc.relation.referencesen | [22] Bolshev, L.N.; Smirnov, N.B. TablitsyMatematicheskoiStatistiki; Nauka: Moskva, 1983. | |
dc.relation.uri | https://doi.org/10.1016/j.matdes.2014.05.009 | |
dc.relation.uri | https://doi.org/10.23939/chcht10.04si.631 | |
dc.relation.uri | https://doi.org/10.1016/j.conbuildmat.2008.12.001 | |
dc.relation.uri | https://doi.org/10.1515/ace-2015-0106 | |
dc.relation.uri | https://doi.org/10.1016/j.proeng.2017.02.159 | |
dc.relation.uri | https://doi.org/10.23939/chcht14.03.420 | |
dc.relation.uri | https://doi.org/10.1155/2013/415246 | |
dc.relation.uri | https://doi.org/10.23939/chcht04.04.325 | |
dc.relation.uri | https://doi.org/10.23939/chcht02.01.047 | |
dc.relation.uri | https://doi.org/10.23939/chcht07.03.279 | |
dc.relation.uri | https://doi.org/10.23939/chcht11.01.049 | |
dc.relation.uri | https://doi.org/10.23939/chcht13.04.489 | |
dc.relation.uri | https://doi.org/10.23939/chcht14.02.251 | |
dc.relation.uri | https://doi.org/10.1007/978-3-030-57340-9_1 | |
dc.relation.uri | https://doi.org/10.1080/14680629.2020.1808518 | |
dc.relation.uri | https://doi.org/10.23939/chcht15.02.274 | |
dc.relation.uri | https://doi.org/10.23939/chcht15.03.443 | |
dc.relation.uri | https://doi.org/10.23939/chcht15.04.608 | |
dc.relation.uri | https://doi.org/10.1002/app.36810 | |
dc.rights.holder | © Національний університет “Львівська політехніка”, 2022 | |
dc.rights.holder | © Gunka V., Bilushchak H., Prysiazhnyi Y., Demchuk Y., Hrynchuk Y., Sidun I., Shyshchak O., Bratychak M., 2022 | |
dc.subject | гудрон | |
dc.subject | формальдегід | |
dc.subject | оптимальні умови | |
dc.subject | експериментально-статистична математична модель | |
dc.subject | tar | |
dc.subject | formaldehyde | |
dc.subject | optimal conditions | |
dc.subject | experimental statistical-mathematical (ESM) model | |
dc.title | Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues.4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products | |
dc.title.alternative | Одержання бітуму, модифікованого низькомолекулярними органічними сполуками із нафтових залишків. 4. Встановлення оптимальних умов процесу модифікування гудрону формальдегідом та властивості модифікованих продуктів | |
dc.type | Article |
Files
Original bundle
1 - 2 of 2
No Thumbnail Available
- Name:
- 2022v16n1_Gunka_V-Production_of_Bitumen_Modified_142-149.pdf
- Size:
- 551.11 KB
- Format:
- Adobe Portable Document Format
No Thumbnail Available
- Name:
- 2022v16n1_Gunka_V-Production_of_Bitumen_Modified_142-149__COVER.png
- Size:
- 543.74 KB
- Format:
- Portable Network Graphics
License bundle
1 - 1 of 1