Browsing by Subject "aerated concrete"
Now showing 1 - 6 of 6
- Results Per Page
- Sort Options
Item Aerated concrete with the use of ferruginous quartzite processing waste(Видавництво Львівської політехніки, 2020-10-10) Malovanyy, Myroslav; Ilyash, Oksana; Povzun, Oleksiy; Kalynychenko, Valeriy; Bylym, Ludmyla; Kasich, Vitaliy; Lviv Polytechnic National University; Yuri Kondratyuk National Polytechnic University of Poltava; Donetsk National Technical UniversityWaste (tailings) of mining and processing plants of Kryvbas were studied by the stages of their magnetic enrichment. The granulometric compositions of the tailings, the amount of iron (total and magnetic) and the mass fraction of solid in them are determined. The expediency of disposing of ferruginous quartzite waste at the first stage of enrichment as a silica component in cellular concretes is proved. Optimal compositions of aerated concrete mixtures are determined based on the following criteria: the average density of cellular concrete in the dry state and its compressive strength.Item Effective aerated concrete for energy efficient construction(Lviv Polytechnic Publishing House, 2016) Zavadsky, Igor; Rusyn, Bohdan; Lviv Polytechnic National UniversityThe article analyzes methods of improving quality indicators of aerated concrete. It is shown that nanotechnological control of cementitious systems containig fine mineral additives create opportunities for efficient production of aerated concrete with improved performance.Item Non-autoclaved aerated concrete produced using industrial wastes(Видавництво Львівської політехніки, 2013) Melnyk, A. Y.; Poznyak, O. R.; Soltysik, R. A.There is investigated the effect of carbonate-containing and sulfate salt processing wastes on the properties of cementitious systems and aerated concretes based on them. Досліджено вплив карбонатвмісного та сульфатного відпадків переробки солі на властивості цементуючих систем та ніздрюватих бетонів на їх основі.Item Peculiarities of structure formation processes in nonautoclaved aerated concrete produced using industrial wastes(Видавництво Львівської політехніки, 2013) Melnyk, AndryFollowing the strategy of sustainable development and the principle of applying the best available technologies, energy saving in Ukrainian Housing and Public Utilities Sector is achieved by constructing energy efficient buildings due to applying efficient building materials. Development of modern building technologies in all technologically advanced countries is aimed at developing cost-effective, efficient materials the use of which can reduce energy costs and consumption of raw materials. Aerated concrete is the optimal material for housing because it has wide density and durability range, the properties being important for solving various structural problems. The aerated concrete based on the modified cementitious system containing an additional cementitious material, that of carbonate-bearing salt waste is characterized by the compressive strength of 2.7 MPa with the density of 650 kg/m3 after 28 days of hardening.Item Газобетон з добавкою метакаоліну(Національний університет "Львівська політехніка", 2012) Мельник, А. Я.; Позняк, О. Р.; Солтисік, Р. А.Наведено результати дослідження впливу технологічних чинників, таких як витрата портландцементу та розплив циліндра Суттарда на властивості газобетону. Проаналізовано вплив добавки метакаоліну та армувальних волокон на реологічні властивості газобетонної суміші. Досліджено фазовий склад продуктів гідратації міжпорових перегородок. The results of the influence of such technological factors as amount of Portland cement and the flowability (Suttard) on the properties of aerated concrete are shown. The influence of metakaolin additive and reinforcing fibers on the rheological properties of aerated concrete mixture were analysed. The phase composition of hydration products in pore partitions was investigated.Item Перспективи виробництва теплоізоляційного ніздрюватого бетону на основі композиційних в’яжучих(Видавництво Львівської політехніки, 2019-02-26) Позняк, О. Р.; Луцюк, І. В.; Якимечко, Я. Б.; Мельник, В. М.; Pozniak, O. R.; Lutsyuk, I. V.; Yakymechko, Y. B.; Melnyk, V. M.; Національний університет “Львівська політехніка”; Інститут будівництва Політехніки Варшавської Філії (Плоцьк); Lviv Polytechnic National University; Department of construction productionПоказано, що вирішення проблеми енергозбереження об’єктів житлово- громадського призначення можливе завдяки зростанню виробництва та використанню ніздрюватого бетону як ефективного теплоізоляційного і конструкційно- теплоізоляційного матеріалу, що забезпечує реалізацію концепції сталого розвитку України. Встановлено, що однією з найактуальніших проблем технології теплоізоляційних та конструкційно-теплоізоляційних ніздрюватих бетонів є зниження їхньої середньої густини з одночасним забезпеченням необхідних значень міцності та інших експлуатаційних властивостей. Це передбачає розроблення оптимальних рецептурних складів газобетонних сумішей для ніздрюватих бетонів неавтоклавного тверднення, технологічних параметрів їхнього виробництва. Аргументовано вибір складів ніздрюватих бетонів неавтоклавного тверднення, що забезпечує створення оптимальної мікроструктури матеріалу, зменшення макропористості та підвищення тріщиностійкості, зміцнення контактних зон цементного каменю і наповнювачів завдяки спрямованому застосуванню ефективних хімічних модифікаторів і високо- якісної сировини, використання високодисперсних цементуючих матеріалів з високою гідравлічною активністю.