Chemistry & Chemical Technology. – 2016. – Vol. 10, No. 2

Permanent URI for this collection

The scientific-technical journal

It is the scientific-technical journal in English in Ukraine discussing actual problems of chemistry and chemical technology. Compared with other chemical journals Ch&ChT is publishing materials of both theoretical and practical values in such fields as analytical, general organic, physical and inorganic chemistry; chemistry of high molecular compounds; materials science and engineering; chemical kinetics and catalysis; technology of inorganic substances; technology of organic synthesis products; chemical technology of processing of combustible minerals; processes and apparatus of chemical and food productions; biotechnology and ecology.

Chemistry & Chemical Technology : [the scientific-technical journal] / Lviv Polytechnic National University ; editor-in-chief M. Bratychak. – Lviv : Publishing House of Lviv Polytechnic National University, 2016. – Volume 10, number 2. – P. 125–256 : ill.

Browse

Recent Submissions

Now showing 1 - 20 of 20
  • Item
    Зміст до "Chemistry & Chemical Technology" Volume 10, number 2
    (Publishing House of Lviv Polytechnic National University, 2016)
  • Item
    Investigation of functional carboxy-containing oligomers by IR and NMR spectroscopy
    (Publishing House of Lviv Polytechnic National University, 2016) Bashta, Bogdana; Donchak, Volodymyr; Plonska-Brzezinskа, Marta; Astakhova, Olena; Bratychak, Michael
    New functional oligomers have been synthesized via intereaction of epoxy oligomers with carboxylic ones or with dibasic carboxy acids. In some cases synthesis was accompanied by ROP-polymerization of DGEBA, initiated by carboxylic oligomer. The structure of obtained products was investigated by IR, 1Н and 13C NMR spectroscopy. Одержані нові функційні олігомери взаємодією епоксидовмісних олігомерів з карбоксиловмісними або з двоосновними карбоновими кислотами. В окремих випадках процес їх одержання супроводжувався ROP-полімеризацією дигліциділового етеру бісфенолу А, ініційованою карбоксиловмісним олігомером. Структуру синтезованих олігомерів підтверджено методами ІЧ, 1Н та 13C ЯМР спектроскопії.
  • Item
    Some approaches to viscometric study of chitosan in acetic acid solution
    (Publishing House of Lviv Polytechnic National University, 2016) Chernova, Valentina; Shurshina, Angela; Kulish, Elena; Zaikov, Gennady
    Some ways of estimating the values of the intrinsic viscosity of chitosan were analyzed. It was shown that the method of Irzhak and Baranov for estimating the current value of the intrinsic viscosity allows to adequately estimates the conformational state of the macromolecular coil and its degree of swelling. Проаналізовані деякі способи оцінки значення характеристичної в'язкості хітозану. Показано, що метод Іржака і Баранова для оцінки поточного значення характеристичної в'язкості дає можливість адекватно оцінювати конформаційний стан клубка макромолекул і його ступінь набухання.
  • Item
    RP-HPLC with detection by means of ESI-MS and UV for identification of chromatographic peaks of some hydroxy derivatives of epoxy resin
    (Publishing House of Lviv Polytechnic National University, 2016) Ivashkiv, Ostap; Kubica, Pavel; Polyuzhyn, Igor; Namiesnik, Jacek; Shyshchak, Olena; Bratychak, Michael
    The composition of products synthesized on the basis of ED-24 epoxy resin has been studied using a reversed phase high-performance liquid chromatography followed by an electrospray ionization mass spectrometry (RP-HPLC/ESI-MS). The synthesized products contain free hydroxy groups and such groups, as epoxy, peroxy, carboxy or acrylate. З використанням методу обернено-фазової високоефективної рідинної хроматографії з масспектрометричним детектуванням (ОФ-ВЕРХ ЕС-МС) вивчено склад продуктів, синтезованих на основі епоксидної смоли ЕД-24, що містять у своїй структурі вільні гідроксильні групи та інші, зокрема епоксидну, пероксидну, карбоксильну чи акрилатну групи.
  • Item
    Comparative dynamic characteristics of electrospun ultrathin fibers and films based on poly(3-hydroxybutyrate)
    (Publishing House of Lviv Polytechnic National University, 2016) Staroverova, Olga; Karpova, Svetlana; Iordanskii, Alexey; Olkhov, Anatoliy; Khvatov, Anatoliy; Grumezescu, Alexandru Mihai; Kildeeva, Natalia; Artsis, Marina; Zaikov, Gennady
    The dynamic of polymer chains for electrospun poly(3-hydroxybutyrate) (PHB) fibers and the PHB films was studied with spin probe characteristics obtained by ESR technique. The ESR data combined with DSC analysis reveal the presence of two TEMPO probe populations with different correlation times indicating the heterogeneous structure of intercrystalline areas in the films, fibers and the cold rolled fiber mats. The ESR data are in agreement with the 2-mode model of amorphous state in semicrystalline polymers. The difference in peak intensities shows that effective correlation time in the electrospun fibers exceeds the same characteristic in the film, that also indicates the slower molecular mobility in the low-dense amorphous fraction of PHB fibers as compared to the film. The impact of potential aggressive factors such as water, temperature and ozone upon probe mobility allows suggesting that both the fiber electrospinning and the cold-rolling procedure lead to rearrangement in the intercrystalline fields of PHB that contribute to the progress in the fiber stabilization against the aggressive factors. З метою дослідження динаміки полімерних сегментів методом зондової спектроскопії ЕПР проведено порівняльний аналіз плівок та ультратонких волокон полі(3-гідроксибутирату) (ПГБ). Волокна отримані методом електроформування і додатково досліджені методом ДСК. Показано, що у міжкристалічних областях існують дві популяції молекулярного зонду ТЕМПО, які відрізняються часом кореляції і розташовані у більш або менш щільних областях ПГБ, що узгоджується з бімодальною моделлю аморфного стану в частково кристалічних полімерах. Різниця в ЕПР спектрах доводить, що молекулярна рухомість зонду у волокнах сповільнена порівняно з його рухомістю у плівках ПГБ. Додатково розглянутий вплив агресивного середовища (води і озону) за підвищених температур і показано, що в процесах холодної обкатки або витягуванні волокна при електроформуванні відбувається перебудова міжкристалічних областей ПГБ, що сприяє стабілізації фібрилярної структури проти дії зовнішнього агресивного середовища.
  • Item
    Synthesis and selfassambling of amphiphilic oligoesters based on pyromellitic acid
    (Publishing House of Lviv Polytechnic National University, 2016) Tarnavchyk, Ihor; Voronov, Andriy; Donchak, Volodymyr; Budishevska, Olga; Kudina, Olena; Khomenko, Olena; Harhay, Khrystyna; Samaryk, Volodymyr; Voronov, Stanislav
    The method for synthesis of a new class of amphiphilic oligoesters of pyromellitic acid is developed. As hydrophilic fragments polyethylene glycols or polyethylene glycol mono methyl ethers were used, as lipophilic ones – primary fatty alcohols or cholesterol. The structures of the synthesized oligoesters were confirmed by IR- and PMR-spectroscopy. The oligoesters could solubilize water-insoluble substances, for example such effective antitumor lipophilic drug as curcumin. The high solubilization capacity of the oligoesters assemblies and their biodegradability, as well as other properties (size distribution, ζ-potential) make the oligoesters considered as promising materials for the design of drug delivery systems. Розроблена методика та вперше синтезовано новий клас амфіфільних поверхнево-активних естерів піромелітової кислоти в яких роль гідрофільних фрагментів виконують залишки поліетиленгліколів або монометильованих поліетиленгліколів, а ліпофільних – залишки первинних спиртів або холестеролу. Структуру синтезованих естерів підтверджено методами ІЧ та ПМР спектроскопії. При концентраціях більших за ККМ естери здатні солюбілізувати нерозчинні у воді речовини (в тому числі такий ефективний протираковий препарат, як куркумін). Міцелярні нанорозмірні частинки естерів за своїми фізико-хімічними характеристиками (розмірами, хімічною структурою, "ємністю" по відношенню до інкапсульованих препаратів) відповідають вимогам, що пред’являються до систем доставки лікарських засобів і можуть розглядатись як перспективні матеріали для конструювання таких систем.
  • Item
    Initiated by organic peroxides cooligomerization of unsaturated hydrocarbons of C5 fraction – by-product of ethylene production
    (Publishing House of Lviv Polytechnic National University, 2016) Dzinyak, Bohdan; Melnyk, Stepan
    Initiated by organic peroxides cooligomerization of unsaturated compounds of C5 fraction has been studied. Such fraction is a by-product obtained at ethylene production via hydrocarbon raw material pyrolysis. The main regularities of the process have been established, the effect of main factors (temperature, reaction time, nature and concentration of the initiators) on the yield and physico-chemical characteristics of the obtained cooligomers has been examined. The effective initiator and optimal technological parameters of the cooligomerization process have been determined. Робота присвячена дослідженню ініційованої органічними пероксидами коолігомеризації суміші ненасичених сполук, що містяться у фракції С5 – побічному продукті виробництва етилену піролізом вуглеводневої сировини. Встановлено основні закономірності коолігомеризації ненасичених вуглеводнів фракції С5. З’ясовано характер впливу основних чинників (температури, тривалості реакції, природи та концентрації ініціаторів) на вихід і фізико-хімічні характеристики одержаних коолігомерів. Вибрано ефективний ініціатор коолігомеризації та оптимальні технологічні параметри процесу.
  • Item
    Interfacial and wetting behavior of cationic, anionic and nonionic surfactants in the absence and presence of lysozyme
    (Publishing House of Lviv Polytechnic National University, 2016) Patel, Rajan; Dohare, Neeraj; Khan, Abbul Bashar
    Herein, we discuss various physicochemical properties of cationic (CTAB), anionic (SDBS) and nonionic (TX-100) surfactants in the absence and presence of lysozyme, at different temperatures by using tensiometery. The surface excess (Γmax) decreases with the increase in temperature for all three kinds of surfactants in the absence and presence of lysozyme, but the most prominent decrease is to be observed for SDBS as compared to CTAB and TX-100 in the presence of lysozyme. The minimum area per molecule (Amin) follows the opposite trend as expected. In addition, contact angle analysis was also done to observe the wettability of poly(methyl methacrylate) (PMMA) surface by these surfactants in the absence and presence of lysozyme. З використанням тензиометрії досліджені фізико-хімічні властивості катіонних (СТАВ), аніонних (SDBS) і нейоногенних (ТХ-100) ПАР в присутності і відсутності лізоциму за різних температур. Встановлено, що величина надлишку поверхні (Γmax) зменшується із збільшенням температури для всіх трьох видів ПАР в присутності і відсутності лізоциму, але найбільш виражене зниження спостерігається на SDBS у порівнянні зі СТАВ і ТХ-100 у присутності лізоциму. Як і очікувалось, величина мінімальної площі на одну молекулу (Аmin) має протилежну тенденцію. Проведено аналіз для визначення крайового кута змочування поверхні полі(метил метакрилату) досліджуваними ПАР в присутності і відсутності лізоциму.
  • Item
    Mineral filled porous composites based on polyvinylpyrrolidone copolymers with bactericidal properties
    (Publishing House of Lviv Polytechnic National University, 2016) Skorokhoda, Volodymyr; Semenyuk, Nataliya; Dziaman, Iryna; Suberlyak, Oleg
    The polymerization of 2-hydroxyethylmethacrylate compositions with polyvinylpyrrolidone has been investigated in the presence of mineral fillers (hydroxyapatite, montmorillonite and wollastonite). The influence of the nature and amount of mineral filler on polymerization kinetics and composition of copolymers has been determined. In the composite structure silver particles were obtained via silver nitrate reduction by polyvinylpyrrolidone tertiary nitrogen. The synthesized silver-containing composites possess bactericidal properties against E. colі and S. aureus bacteria, in particular. Досліджено полімеризацію композицій 2-гідроксіетилметакрилату з полівінілпіролідоном у присутності мінеральних наповнювачів (гідроксіапатиту, монтморилоніту і воластоніту). Встановлено вплив природи та кількості мінерального наповнювача на кінетику полімеризації і склад кополімерів. Підтверджено можливість одержання в структурі композиту частинок срібла реакцією відновлення нітратів срібла третинним атомом нітрогену полівінілпіролідону. Синтезовані срібловмісні композити проявляють фунгібактерицидні властивості, зокрема, проти Escherichia coli, Staphylococcus aureus і Aspergillus niger.
  • Item
    Waste gases cleaning at the production of ferrum oxide pigment using horizontal apparatus with bucket-like dispersers
    (Publishing House of Lviv Polytechnic National University, 2016) Yavorskiy, Victor; Helesh, Andriy
    The efficiency of horizontal apparatus with bucket-like dispersers (HABD) for waste gases cleaning from Fe2O3 dust at the production of red ferrum oxide pigment has been proved by the experiments. It is advisable to carry out the dust trapping in HABD under countercurrent mode. Such mode allows to condense steam from the gas phase and trap small particles of the dust. The positive effect of surface active substances on the dust trapping has been shown. Technologically feasible concentrations of polyacrylamide have been determined. The obtained results may be used for the development of waste gases cleaning technology at the production of ferrum oxide pigment. Експериментально підтверджено ефективність горизонтального апарата з ковшоподібними диспергаторами (ГАКД) для очищення викидних газів виробництва червоного ферумоксидного пігмента від пилу Fe2O3. Встановлено, що процес пиловловлення у ГАКД доцільно проводити в протитечійному режимі, що забезпечить конденсацію водяної пари з газової фази та вловлення дрібних частинок пилу. Показано позитивний вплив на процес вловлення пилу поверхнево-активних речовин, встановлено технологічно доцільні концентрації поліакриламіду. Отримані результати можуть бути використані в процесі розроблення технології очищення викидних газів виробництва червоного ферумоксидного пігмента.
  • Item
    Synthesis of activated carbon from Cocos nucifera leaves agrowaste by chemical activation method
    (Publishing House of Lviv Polytechnic National University, 2016) Jadhav, Abhijit; Mohanraj, Govindraj
    Activated carbon from Cocos nucifera leaves agrowaste was derived. The effect of impregnation ratio was studied by chemical activation method using phosphoric acid as an activating agent. Activated carbon was produced at the activation temperature of 673 K by slow pyrolysis. Nitrogen adsorption isotherms study was performed. Effect of impregnation ratio on the yield, methylene blue number, iodine number, and acid adsorption was studied. The FT-IR spectra show the presence of activated carbon. The TGA investigation reveals that activated carbon is thermally stable at 723 K. The SEM images show the incorporation of activated carbon particles which lead to the systematic change in the morphology of activated carbon. Surface chemistry study predicts the acidic and basic functional groups of Cocos nucifera leaves activated carbon. Отримано активоване вугілля з відходів листя кокосової пальми (Cocos nucifera). За допомогою методу хімічної активації вивчено вплив ступеня просочення з використанням фосфатної кислоти як активуючого агента. Активоване вугілля отримано за температури активації 673 К сповільненим піролізом. Проведені дослідження ізотерм адсорбції азоту. Вивчено вплив ступеня просочення на вихід, кількість метиленового синього, йодне число і кислотну адсорбцію. Наявність активованого вугілля підтверджено ІЧ-Фур'є спектроскопією, його термічна стабільність за 723 К – термогравіметричними дослідженнями. За допомогою скануючої електронної мікроскопії доведено факт включення частинок активованого вугілля, що призводить до систематичної зміни морфології вугілля. Дослідження хімії поверхні активованого вугілля передбачають наявність кислотних і основних функціональних груп.
  • Item
    Obtaining of brown pigments from concentrated waste water containing nickel
    (Publishing House of Lviv Polytechnic National University, 2016) Frolova, Liliya; Pivovarov, Alexander
    The possibility of obtaining brown pigments with the use of blast furnace slag from waste water containing nickel is justified. The scheme of the main reactions is proposed. The kinetics of the reactions is studied. The contribution of the chemical interaction into the overall degree of treatment is established by potentiometric titration. The influence of the main factors on the degree of nickel extraction is determined. The phase composition of the formed pigment is established with the help of X-ray analysis. Rheological properties of the pigment particles are set. The main color characteristics of the obtained products are identified by visual and spectrophotometric way. X-ray microanalysis indicated the presence of the two phases in the obtained precipitate. Dispersed and phase compositions of the original slag determine the rheological properties of the pigment. By varying the synthesis parameters, the obtained patterns provide us with possibility of receiving pigments of the color from light brown to deep brown. Обґрунтовано можливість одержання коричневих пігментів з нікельвмісних стічних вод, використовуючи доменний шлак. Запропоновано схему основних реакцій. Вивчено кінетику реакцій. Методом потенціометричного титрування встановлено внесок хімічної взаємодії в сумарний ступінь перетворення. Визначено вплив основних чинників на ступінь вилучення нікелю. За допомогою рентгенофазового аналізу встановлений фазовий склад пігменту, що утворюється. Встановлені технологічні властивості частинок пігменту. Візуально і спектрофометрично визначені основні колірні характеристики одержаних продуктів. За допомогою рентгенівського мікроаналізу показано наявність двох фаз в отриманому осаді. Дисперсний і фазовий склади вихідних шлаків визначають технологічні властивості пігменту. Отримані закономірності дають можливість, варіюючи параметрами синтезу, одержувати пігменти від блідо-коричневого до насиченого коричневого кольору.
  • Item
    Solvent-free microwave extraction as the useful tool for extraction of edible essential oils
    (Publishing House of Lviv Polytechnic National University, 2016) Kusuma, Heri; Putri, Ditta; Dewi, Intan; Mahfud, Mahfud
    Solvent-free microwave extraction (SFME) is proposed as a method for “green” extraction of edible essential oils extensively used in the fragrance, flavour, and pharmaceutical industries and also in aromatherapy. It is a combination of microwave heating and dry distillation, performed at atmospheric pressure without adding any solvent or water. Isolation and concentration of volatile compounds are performed by a single stage. Basil (Ocimum basilicum L.) was extracted with SFME at atmospheric pressure and 373 K for 30 min. The extracted compounds were removed from the aqueous extract by simple decantation, identified by gas chromatography–mass spectrometry (GC-MS). Hydrodistillation (HD) of basil was performed with 400 ml of water for 4.5 h for comparison of the results with those provided by the proposed method. SFME method offers important advantages over HD, viz. shorter extraction times (30 min vs. 4.5 h); better yields (0.13 % vs. 0.11 %); environmental impact (energy cost is appreciably higher for performing HD than that required for rapid SFME), cleaner features (as no residue generation and no water or solvent used); and provides a more valuable essential oil. SFME is a green technology and appears as a good alternative for the extraction of edible essential oils from aromatic plants used in aromatherapy and food industry. Запропоновано використовувати мікрохвильову екстракцію без розчинника (МЕБР) як метод «зеленої технології» для екстракції харчових ефірних олій, які широко використовуються у парфумерній та фармацевтичній промисловості, а також в ароматерапії. Такий метод є поєднанням мікрохвильового нагріву та сухої перегонки за атмосферного тиску без додавання будь-якого розчинника або води. Виділення і концентрування летких сполук відбувається одностадійно. За допомогою вказаного методу проведено екстракцію базиліку (Ocimum Basilicum L.) за атмосферного тиску і 373 К протягом 30 хв. Екстраговані компоненти видалені з водного екстракту простою декантацією та ідентифіковані за допомогою газової хроматографії–мас-спектрометрії (ГХ-МС). Для порівняння отриманих результатів проведено гідродистиляцію (ГД) базиліку з 400 мл води протягом 4,5 год. Доведено, що запропонований МЕБР метод має важливі переваги порівняно з ГД, а саме: скорочення часу екстракції (30 хв проти 4,5 ч); вищий вихід (0,13% проти 0,11%); менший вплив на навколишнє середовище (затрати енергії є значно нижчими), не використовується вода або розчинник і не утворюються залишки; отримується більш цінна ефірна олія. Показано, що метод МЕБР відноситься до «зелених технологій» і є хорошою альтернативою для вилучення харчових ефірних олій з ароматичних рослин, які використовуються в ароматерапії і харчовій промисловості.
  • Item
    Technology of recycling, properties and use of polyvinylchloride-coated paper waste
    (Publishing House of Lviv Polytechnic National University, 2016) Voronych, Oleksandra; Kurta, Sergiy; Starchevskyy, Volodymyr; Fedorchenko, Sofiya
    The technology of recycling of polymer-coated paper waste is described. Physical and chemical properties of fibers obtained from wallpaper wastes and from their derivative compositions were investigated. A special crusher with primary and secondary grinding stages and with a section for separating paper fibers from polymer coating was designed. Industrial trials of cellulose obtained from wallpaper wastes for the asbestos cement sheets manufacturing were held. Its impact on the quality and physical and mechanical properties of sheets was shown. Methods of thermogravimetry, microscopy, and differential thermal, infrared spectral and chemical analysis were applied to investigate cellulose fibers derived from recycled wallpaper. Their properties were compared to the natural cellulose and polyvinylacetate fibers, which are used in the production of asbestos cement sheets. Описано технологію рециклінгу целюлозних волокон паперової основи та його полімерного покриття, одержаних при переробці-подрібненні целюлозо вмісних шпалер з полівінілхлоридним покриттям внаслідок його відділення від паперової основи. Описані фізико-хімічні властивості волокон та композицій на їх основі при повторному їх використання – рециклінгу. Сконструйовано спеціальну 5-ти стадійну 2-модульну дробарку з первинним і вторинним подрібненням та відділенням-сепарацією паперової основи від полімерного покриття і очисткою повітряного потоку. Проведено промислове випробування одержаної таким чином з відходів шпалер розпушеної целюлози для виготовлення листів азбестоцементного шиферу і показано їх вплив на якість та фізико-механічні характеристики шиферу. Методами термогравіметрії, диференціального термічного, ІЧ-спектрального, хімічного аналізів та мікросконії вивчено волокна целюлози, одержані від переробки відходів шпалер, та порівняно їх властивості з природними целюлозними та ПВА волокнами, що використовуються у виробництві азбестоцементного шиферу.
  • Item
    Advancement in applicability of carbon nanotubes in progressive fuel cells
    (Publishing House of Lviv Polytechnic National University, 2016) Sarkar, Snatika; Ilango, Vijaya
    This paper focuses on proton exchange membrane fuel cells (PEMFC) and usage of carbon nanotubes for increased efficiency. The paper also discusses a possible material that may find potential application in the fuel cell as an alternative to the carbon nanotubes existing so far. В роботі показано застосування вуглецевих нанотрубок для підвищення ефективності паливних елементів з протонно-обмінною мембраною. Проведено дослідження матеріалу, який може знайти потенційне застосування в паливному елементі як альтернатива існуючим на сьогодні вуглецевим нанотрубкам.
  • Item
    Mechanism of phosphates sorption by zeolites depending on degree of their substitution for potassium ions
    (Publishing House of Lviv Polytechnic National University, 2016) Sabadash, Vira; Gumnitsky, Jaroslaw; Hyvlyud, Anna
    The mechanism of phosphates sorption process on clinoptilolite was determined. The significant increase in zeolite sorption capacity was observed while interaction of zeolite and wastewaters with acid reaction. New active centers of zeolite are formed due to disalumination of its surface. Встановлено механізм процесу сорбції фосфатів на клиноптилоліті. Досліджено, що в процесі взаємодії цеоліту зі стічними водами, які мають кислу реакцію, спостерігається значне збільшення сорбційної ємності цеоліту. Це пояснюється утворенням нових активних центрів цеоліту внаслідок деалюмування його поверхні.
  • Item
    Structural conformation of polytetrafluoroethylene composite matrix
    (Publishing House of Lviv Polytechnic National University, 2016) Budnik, Oleg; Budnik, Anatoliy; Sviderskiy, Valentin; Berladir, Kristina; Rudenko, Pavel
    Enhancement of physical and mechanical properties and structuring activity of polytetrafluoroethylene as matrix of composites by means of mechanical activation is shown. Operating modes of mechanical activation equipment are defined, in which the service properties of PTFE are maximized. The effect of mechanical activation technology on restructuring and change of morphology and supramolecular structure of PTFE is detected for the first time. Показано підвищення фізико-механічних властивостей та структуруючої активності політетрафлуоретилену як матриці композитів внаслідок механічної активації. Визначено режими роботи механоактиваційного обладнання, за яких експлуатаційні властивості ПТФЕ є максимальні. Вперше виявлено вплив технології механічної активації на структурну перебудову та зміну морфології і надмолекулярної структури ПТФЕ.
  • Item
    Analysis of di-(2-ethylhexyl)phthalate in plastic bottles of drinking water with cone-shaped membrane–liquid phase microextraction
    (Publishing House of Lviv Polytechnic National University, 2016) Raharjo, Yanuardi; Kartika, Atika Gardena; Handajani, Usreg Sri
    The analysis of di-(2-ethylhexyl) phthalate (DEHP) was done in three kinds of polyethylene terephthalate (PET) plastic bottles of mineral water, namely: new bottle, ten times refilled and sunlight exposed new bottle. The optimal condition of this study is ethyl acetate as an organic solvent, 175 μl of organic solvent and 20 min of extraction time. This method has a limit detection about 0.29 ppm, precision 96.48– 110.10 %, accuracy until 1.95 % and enrichment factor until 302.67 times. Based on these results, cone shaped membrane-liquid phase microextraction method (CSMLPME- HPLC) could be used to analyze DEHP in a PET plastic bottle of drinking water sample under mentioned kinds of circumstances with the concentration of 0.40, 0.53 and 0.76 ppm, respectively. Проведено аналіз ді-(2-етилгексил) фталату (ДЕГФ) для трьох видів пластикових пляшок для мінеральної води, а саме: нових пляшок, десять разів заповнених пляшок і нових пляшок після дії сонячного світла. Визначено оптимальні умови екстракції: етилацетат як органічний розчинник, його кількість 175 мкл, час екстракції 20 хв. Встановлено, що межа виявлення методу становить близько 0,29 м.д., сходимість 96,48–110,10 %, точність до 1,95% і коефіцієнт збагачення до 302,67. Показано, що метод рідкофазової мікроекстракції з конічною мембраною може бути використаний для аналізу вмісту ДЕГФ у вказаних типах пластикових пляшок для питної води з концентрацією 0,40; 0,53 і 0,76 м.д., відповідно.
  • Item
    Production of renewable energy resources via complex treatment of cyanobacteria biomass
    (Publishing House of Lviv Polytechnic National University, 2016) Malovanyy, Myroslav; Nikiforov, Volodymyr; Kharlamova, Olena; Synelnikov, Olexander
    The process of cyanobacteria complex treatment via obtaining of inedible fat, suitable for the production of biodiesel and biogas has been investigated. The prospective application of hydrodynamic cavitation to increase the efficiency of inedible fat extraction and biogas synthesis is shown. A comprehensive strategy for the cyanobacteria use in the energy and agricultural technologies is suggested. Досліджено процес комплексного перероблення ціанобактерій через отримання технічного жиру, придатного для виробництва біодизеля, та біогазу. Показано перспективність застосування гідродинамічної кавітації для збільшення ефективності екстрагування технічного жиру та синтезу біогазу. Запропонована комплексна стратегія використання ціанобактерій у енергетичних та сільськогосподарських технологіях.
  • Item
    In memory of professor Edward Sucharda: apropos of the 125th anniversary of birth
    (Publishing House of Lviv Polytechnic National University, 2016) Vostres, Volodymyr