Сучасні досягнення геодезичної науки та виробництва. – 2019. – Випуск 2(38)

Permanent URI for this collectionhttps://ena.lpnu.ua/handle/ntb/45910

Збірник наукових праць Західного геодезичного товариства УТГК

У цьому випуску збірника опубліковано нові результати з розвитку теорії та методів дослідження фігури Землі та зовнішнього гравітаційного поля, а також дослідження у галузі використання GNSS- і GIS-технологій, інженерної геодезії, картографії, фотограмметрії та кадастру. Для викладачів, наукових співробітників, аспірантів геодезичного профілю, працівників геодезичних та картографічних підприємств і відомств.

Сучасні досягнення геодезичної науки та виробництва : збірник наукових праць Західного геодезичного товариства УТГК / Західне геодезичне товариство Українського товариства геодезії і картографії, Національний університет «Львівська політехніка» ; головний редактор І. С. Тревого. – Львів : Видавництво Львівської політехніки, 2019. – Випуск 2 (38). – 108 с. : іл.

Сучасні досягнення геодезичної науки та виробництва

Зміст


1
8
13
15
20
24
32
40
45
54
61
67
72
97
104

Content


1
8
13
15
20
24
32
40
45
54
61
67
72
97
104

Browse

Author: search.filters.author.Тревого, І.Subject: search.filters.subject.528.022.11

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Investigations to digitizing of the gyro oscillation swing by a line camera
    (Видавництво Львівської політехніки, 2019-02-28) Хегер, В.; Тревого, І.; Лопатін, Я.; Heger, W.; Trevoho, I.; Lopatin, Y.; Вища школа Нойбранденбурга; Національний університет “Львівська політехніка”; Neubrandenburg University of Applied Sciences; Lviv Polytechnic National University
    The purpose of this work is to develop a technology for an automatic measurement process for determining the azimuth by the “Gyromax AK-2M” gyroscope. The accuracy of determining the principal values should be higher than by manual procedure. A method for digitizing the gyro oscillations using a camera with a linear sensor and programming code is proposed in this work. The working possibility of the line camera from Coptonix™ company was investigated, as well as the possibility of its connection to a single board computer Raspberry Pi 3B for data transmission and processing. The possibility of using the Python 3.0 programming language for these tasks was tested. Methodology. To implement this project, an integrated approach was used, using devices such as a camera with a linear sensor, a single board computer and facility, that simulates gyroscope oscillations. This research includes investigations in digitizing of data, computing the azimuth values and automatizing these processes. For automatized data computation were used the same two methods as in the regular manual measurements – Turning point method (TPM) and Pass-Through method (PTM). Results. The result of this work is an automated oscillation measurement system, that can be applied in gyroscopes. The system includes developed software, which connects the user to the linear camera and processing computer, records the necessary data, transfers them to the client-computer and calculates the necessary values. For the convenience of using the program by other users, the program is provided with a graphical user interface. The result of the program is a file with the extension XML, which contains data about measurements. Scientific novelty and practical significance. The new method of digitizing the gyroscope oscillations is proposed in this work. Application of a line camera and a single board computer for the digitization of measurements opens a lot of possibilities for improving the automation processes of the geodetic devices, which could increase the accuracy of measurement and decrease its duration. By developing this method of digitization, it is possible to start production of an improved version of gyro add-on GYROMAX AK-2M.
  • Thumbnail Image
    Item
    До точності кутових вимірювань цифровими теодолітами
    (Видавництво Львівської політехніки, 2019-02-28) Тревого, І.; Вовк, А.; Лісняков, С.; Trevoho, I.; Vovk, A.; Lisniakov, S.; Національний університет “Львівська політехніка”; Lviv Polytechnic National University
    The purpose of this work is to formulate an experiment and study the feasibility of using permutations of the limb when measuring the angles by the method of circular techniques by digital theodolites (ET). Methodology. Measurement of horizontal angles in geodetic networks of condensation and engineering geodesic networks is carried out by the method of circular techniques with the number of directions more than two. It is important that the angles were measured in favorable conditions with calm images of visions or weakly shaken images. To date, many digital theodolites, mostly implemented in electronic metering stations (ETs), various manufacturers of the countries of the world, with different systems of determination of angular variables are issued. For the most part, digital theodolites (ETs) are divided precisely on the precision (with the angle of the angle <1'') and the exact ones (with an angle of angle up to 5''). The accuracy of the measurement depends on the effects of a number of errors, including: instrumental errors, operator errors and environmental errors. The transition from opto-mechanical theodolites to digital does not involve reducing the influence of instrumental errors or their complete elimination; therefore, the question arises of the expediency of measuring the angles from only one limb setting and how much it would be advisable to use limb permutations when measuring angles using circular techniques. With regard to instrumental errors, with the advent of digital theodolites (ET), their impact and the number did not become smaller, and the operator errors somewhat decreased, since the counting is carried out without his participation, automatically. Errors of the environment remain and their impact is difficult to reduce. Measurements of the digital part of the digital theodolite (ET) are automated, and the results are visualized on the display. The operator carries out the centering, installs the device in working condition and carries out the visage. Thus, there is the content to explore the feasibility of using the method of circular techniques when measuring the horizontal angles of digital theodolites (ET). Results. For the experiment, a number of the most common modern digital theodolites (ETs) of different manufacturers and modifications have been selected. Measurement was performed in two programs in six techniques. In total, for the seven digital theodolites (ET) horizontal angle measurements were performed, the analysis and evaluation of the accuracy of the obtained results, their normalization and correlation processing of the research results were performed. Scientific novelty and practical significance. Modern geodetic instruments, in particular digital theodolites (ET), today carry out tasks in many fields of geodesy, construction, economics and defense of countries. The main advantage of the use of modern digital theodolites (ET) is their high accuracy and the fact that they can perform the tasks in automatic or semi-automatic modes with minimal human participation in the control process. However, the results of measurements depend on the effect of errors, and especially on the instrumental ones. Therefore, increasing the accuracy of measuring the horizontal angles by digital theodolites by the method of circular techniques, proved in this study, is relevant.