Chemistry & Chemical Technology. – 2016. – Vol. 10, No. 4

Permanent URI for this collectionhttps://ena.lpnu.ua/handle/ntb/35898

The scientific-technical journal

It is the scientific-technical journal in English in Ukraine discussing actual problems of chemistry and chemical technology. Compared with other chemical journals Ch&ChT is publishing materials of both theoretical and practical values in such fields as analytical, general organic, physical and inorganic chemistry; chemistry of high molecular compounds; materials science and engineering; chemical kinetics and catalysis; technology of inorganic substances; technology of organic synthesis products; chemical technology of processing of combustible minerals; processes and apparatus of chemical and food productions; biotechnology and ecology.

Chemistry & Chemical Technology : [the scientific-technical journal] / Lviv Polytechnic National University ; editor-in-chief M. Bratychak. – Lviv : Publishing House of Lviv Polytechnic National University, 2016. – Volume 10, number 4. – P. 387–518 : ill.

Browse

Search Results

Now showing 1 - 10 of 21
  • Thumbnail Image
    Item
    Зміст до "Chemistry & Chemical Technology" Volume 10
    (Publishing House of Lviv Polytechnic National University, 2016)
  • Thumbnail Image
    Item
    Авторський покажчик до "Chemistry & Chemical Technology" Volume 10
    (Publishing House of Lviv Polytechnic National University, 2016)
  • Thumbnail Image
    Item
    Зміст до "Chemistry & Chemical Technology" Volume 10, number 4
    (Publishing House of Lviv Polytechnic National University, 2016)
  • Thumbnail Image
    Item
    Synthesis, structural and physicochemical characterization of BaFe1-xAlxO3−Δ oxides
    (Publishing House of Lviv Polytechnic National University, 2016) Fodil, Hanane; Omari, Mahmoud
    In this study, BaFe1−xAlxO3-δ (0 ≤ x ≤ 0.3) perovskite-type oxides were prepared by sol-gel method using citric acid as chelating agent. The samples were subjected to various calcination temperatures in order to investigate the physicochemical properties of the oxide affected by the parameter. Thermogravimetric analysis, Fourier transform infrared spectroscopy and X-ray diffraction (XRD) techniques are used to explore precursor decomposition and to establish adequate calcination temperature for the preparation of the nanopowders. The studied compounds have hexagonal crystal structure at the temperature of 1123 K. The samples obtained after calcination at 1123 K were characterized by XRD, Brunauer-Emmett-Teller surface area analysis, scanning electron microscopy, powder size distribution and electrical conductivity. The microstructure and morphology of the compounds show that the particles are nearly spherical in shape and are partially agglomerated. The highest surface area and total pore volume are achieved for BaFe0.8Al0.2O3-δ oxide. Temperature dependence of electrical conductivity shows a semiconducting behavior. За допомогою золь-гель методу з використанням лимонної кислоти як хелатного агента отримано оксиди BaFe1−xAlxO3-δ (0 ≤ x ≤ 0.3) зі структурою типу перовскіту. Досліджено вплив температури прокалювання на фізико-хімічні властивості оксиду. За допомогою термогравіметричного аналізу, Фур’є інфрачервоної спектроскопії та рентгенівської дифракції вивчено розклад прекурсора і визначено адекватну температуру прокалювання для отримання нанопорошків. Встановлено, що за температури 1123 К сполуки мають гексагональну кристалічну структуру. Зразки, отримані після прокалювання при 1123 К, досліджено за допомогою рентгенівської дифракції, аналізу Брунауера-Еммета-Теллера (БЕТ), скануючої електронної мікроскопії та визначено їх електропровідність. Мікроструктурними і морфологічними дослідженнями встановлено, що частинки мають практично сферичну форму і частково агломеруються. Показано, що найбільшу площу поверхні і загальний об’єм пор має оксид BaFe0.8Al0.2O3-δ. Напівпровідниковий характер доведений температурною залежністю електропровідності.
  • Thumbnail Image
    Item
    Structural, thermal and electrical properties of doped poly(3,4-ethylenedioxythiophene)
    (Publishing House of Lviv Polytechnic National University, 2016) Kelkar, Deepali; Chourasia, Ashish
    Poly(3,4-ethylenedioxythiophene) (PEDOT) was chemically synthesized, undoped and then re-doped using FeCl3 as well as camphorsulfonic acid (CSA). FTIR results confirm the nature of the synthesized and doped samples. XRD analysis indicates crystal structure modification after doping and was also used to calculate crystallinity of samples. Crystallinity increases after FeCl3 doping, whereas it reduces due to CSA doping. TGADTA results show reduction in Tg value for FeCl3 doped sample while it increases for CSA doped samples compared to that of undoped PEDOT. Reduction in Tg indicates plasticizing effect of FeCl3 whereas increase in Tg show anti-plasticizing effect of CSA in PEDOT. Conductivity (s) value increases by two orders of magnitude after doping. Logs vs. 1/T graph show metallic nature of undoped PEDOT above 308 K, however both doped samples show semiconducting nature from 301 to 383 K. Хімічно синтезовано недопований і допований за допомогою FeCl3 і камфор сульфокислоти (КСК) полі(3,4-етилендіоксітіофен) (ПЕДОТ). За допомогою Фур’є-спектроскопії підтверджено природу синтезованого і допованого зразків. За допомогою дифракції рентгенівських променів встановлено кристалічну структуру після допування і розрахована кристалічність зразків. Показано, що кристалічність збільшується після допування FeCl3, але знижується при допуванні КСК. За результатами ТГА-ДТА встановлено, що значення температури силування (Tg) для зразка, допованого FeCl3, знижується, а для зразка, допованого КСК – збільшується, у порівнянні з недопованим ПЕДОТ. Зниження Tg вказує на пластифікуючий ефект FeCl3, тоді як збільшення Tg – на антипластифікуючий ефект КСК в ПЕДОТ. Визначено, що після допування значення електропровідності (s) збільшується на два порядки. Залежність logs–1/T вказує на металічну природу недопованого ПЕДОТ за температури вище 308 К, і напівпровідникову природу обох допованих зразків в інтервалі 301–383 К.
  • Thumbnail Image
    Item
    Oxidation of unsaturated aldehydes by peracetic acid
    (Publishing House of Lviv Polytechnic National University, 2016) Pikh, Zoryan; Nebesnyi, Roman; Ivasiv, Volodymyr; Pich, Andrij; Vynnytska, Sofia
    The paper is dedicated to studies of kinetic regularities of oxidation of unsaturated aldehydes by organic peracids. The routes of products formation were considered, kinetic model of the oxidation reaction was designed and reaction activation parameters were calculated based on experimental data. New data on reactivity of aldehydes with various structures in the reaction with peracids were obtained. Стаття присвячена дослідженню кінетичних закономірностей реакції окиснення ненасичених альдегідів органічними перкислотами. На основі експериментальних даних запропоновано шляхи утворення продуктів, розроблено кінетичну модель реакції окиснення та розраховано активаційні параметри реакції. Наведено нові дані про реакційну здатність альдегідів різної будови в реакції з перкислотами.
  • Thumbnail Image
    Item
    Synthesis and evaluation of new bis(imino) pyridine based catalysts for ethylene polymerization
    (Publishing House of Lviv Polytechnic National University, 2016) Cordeiro, Suellem; Pereira, Leticia; Simoes, Marina de O.; Marques, Maria de Fatima
    Three-component catalytic systems based on 2,6-bis(imino) pyridine iron(II) chloride were synthesized from different ligands, which provided new alternative catalysts for polymerization of ethylene. The synthesized catalysts were characterized by Fourier transform infrared spectroscopy (FTIR), and the lack of absorption bands was observed in the region related to the carbonyl, as well as the presence of bands in the region of imino groups corresponding to C=N bonds. Coordination with Fe was also carried out. The structure of the ligands and the new catalysts were confirmed by the elemental analysis (CHN), and 1H- and 13C-nuclear magnetic resonance spectroscopy. In ethylene polymerization with methylaluminoxane as a cocatalyst, the activity of catalyst C1 was high. Although this catalyst structure contains sterically bulky ligands, the metal center was not sufficiently protected allowing transfer reactions, producing polyethylene with a low molar mass and melting temperature. З використанням різноманітних лігандів синтезовані нові трикомпонентні каталітичні системи на основі 2,6-біс(іміно)піридин хлориду заліза(II), які можуть бути альтернативними каталізаторами полімеризації етилену. За допомогою Фур’є-спектроскопії проведено аналіз синтезованих каталізаторів. Виявлено відсутність смуг поглинання в області карбонільних груп, і наявність смуг в області іміногрупи, що відповідає C=N зв’язкам. Встановлено відповідність з Fe. Структура лігандів і нових каталізаторів підтверджена за допомогою елементного аналізу, 1H- та 13С-ЯМР спектроскопії. При полімеризації етилену з метилалюмоксаном як співкаталізатором, встановлено високу активність каталізатора C1. Незважаючи на те, що каталізатор містить стерично об’ємні ліганди, металевий центр не є достатньо захищеним і тому мають місце реакції перенесення, внаслідок чого отримується поліетилен з низькою молекулярною масою і температурою плавлення.
  • Thumbnail Image
    Item
    Modification of polysaccharides by N-derivatives of glutamic acid using steglich reaction
    (Publishing House of Lviv Polytechnic National University, 2016) Nagornyak, Mykhailo; Figurka, Natalia; Samaryk, Volodymyr; Varvarenko, Serhiy; Ferens, Maria; Oleksa, Victoria
    The work describes dextrin modifications with the purpose to obtain a functional product with an extensive structure of macromolecules, capable to form self-stabilized dispersions in an aqueous environment. To ensure the branching, the modification was performed using the functional agents – N-derivatives of glutamic acid. The substitute in the N-position provides the introduction of the required function. Modification was performed by using the Steglich reaction that provides the progress of the process in soft, controlled conditions. В роботі викладено ряд досліджень стосовно модифікації декстрину з метою одержання функціонального продукту з розгалуженою структурою макромолекул, здатного до формування в водних середовищах самостабілізованих дисперсій. Для забезпечення розгалуження макромолекул декстрину модифікацію здійснювали біфункціональними агентами – N-похідними глутамінової кислоти. Замісник в N-положенні забезпечує введення необхідної функції. Модифікацію здійснювали за реакцією Стегліха, що забезпечує перебіг процесу в мяких, контрольованих умовах.
  • Thumbnail Image
    Item
    Properties of the hybrid glauconite/polyaniline composites synthesized in the aqueous citrate acid solutions
    (Publishing House of Lviv Polytechnic National University, 2016) Yatsyshyn, Mykhaylo; Makogon, Viktoriia; Reshetnyak, Oleksandr; Demchenko, Pavlo; Dumanchuk, Nataliya; Stadnyk, Yuriy
    For the first time the series of the composites of aniline and natural mineral glauconite with different ratio of components has been synthesized by oxidation of aniline by ammonium peroxydisulfate in 0.5 M citrate acid aqueous solutions in the presence of dispersion of mineral filler. X-ray phase analysis confirms the amorphous-crystalline structure of produced composites. Results of FTIR spectral analysis show that the samples contain PAn in the form of emeraldine salt and also indicate the presence of weak interfacial interaction between particles of glauconite and polyaniline macrochains in the result of the formation of hydrogen bonds. The results of thermogravimetric analysis of synthesized samples with different composition showed that thermal stability of composites samples increases under the higher glauconite content. It is determined that the thermodestruction of composites is a multistage process. The electric conductivity of composites produced samples with high content of polyaniline is on the level of pure polyaniline. The specific magnetization of synthesized composites in applied magnetic field increases to the value which is characteristic of the pure mineral under the increasing of glauconite content in the composite. Окисненням аніліну пероксодисульфатом амонію в 0,5 М водних розчинах цитратної кислоти за наявності природного мінералу глауконіту синтезовано ряд композитів із різним співвідношенням глауконіт/поліанілін. За допомогою рентгенофазового аналізу показано, що структура отриманих композитів є аморфно-кристалічною. Результати ІЧ-ФП спектрального аналізу зразків показали, що зразки містять ПАн у вигляді емеральдинової солі, а також вказують на наявність слабкої міжфазової взаємодії між частинками глауконіту і макроланцюгів поліаніліну внаслідок утворення водневих зв’язків. Порівняння результатів дериватографічних досліджень синтезованих зразків з різним складом показало, що зі збільшенням вмісту глауконіту підвищується термічна стійкість зразків композитів. Виявлено, що процес термодеструкції композитів є багатостадійним. Питома електропровідність отриманих композитів при високих вмістах поліаніліну знаходиться на рівні таких показників, як для чистого поліаніліну. Питома намагніченість отриманих композитів в прикладеному магнітному полі при збільшенні вмісту глауконіту в композитах зростає до значень близьких для чистого мінералу.
  • Thumbnail Image
    Item
    Methods for determination of oil and grease contents in wastewater from the petroleum industry
    (Publishing House of Lviv Polytechnic National University, 2016) Cirne, Ilma; Boaventura, Jaime; Guedes, Yuri; Lucas, Elizabete
    Infrared spectrometry and spectrofluorimetry methods were correlated in the measurement of oil concentration in produced water. Furthermore, we compared colorimetry and gravimetry techniques. Adsorption experiments were performed in synthetic oily wastewaters by polymer compounds based on poly(hydroxyethyl acrylamide and polypropylene. The residual oil content was used in the techniques correlation. За допомогою інфрачервоної спектрометрії і спектрофлуориметрії визначено концентрацію нафти в промислових водах. Проведено порівняння колориметричних і гравіметричних методів. Досліджено адсорбцію шкідливих компонентів із синтетичних нафтозабруднених стічних вод полімерними сполуками на основі полі(гідроксиетил)акриламіду і поліпропілену. Для кореляції методу використано показник залишкового вмісту нафти.