Epoxy Composites Filled with Natural Calcium Carbonate. 1. Epoxy Composites Obtained in the Presence of Monoperoxy Derivative of Epidian-6 Epoxy Resin

Simple item page
dc.citation.epage364
dc.citation.issue3
dc.citation.spage360
dc.contributor.affiliationLviv Polytechnic National University
dc.contributor.affiliationGdansk University of Technology
dc.contributor.authorBratychak, Michael
dc.contributor.authorAstakhova, Olena
dc.contributor.authorShyshchak, Olena
dc.contributor.authorZubal, Olha
dc.contributor.authorSienkiewicz, Maciej
dc.contributor.authorIvashkiv, Ostap
dc.coverage.placenameЛьвів
dc.coverage.placenameLviv
dc.date.accessioned2020-03-02T13:09:23Z
dc.date.available2020-03-02T13:09:23Z
dc.date.created2019-02-28
dc.date.issued2019-02-28
dc.description.abstractВивчені фізико-механічні властивості зразків на основі наповнених епокси-олігоестерних сумішей, що склада- ються із промислової епоксидної смоли Epidian-5 та олігоестер- акрилату TGM-3 і містять монопероксидну похідну епоксидної смоли Epidian-6 (PO. Як мінеральний наповнювач використано CaCO3, затвердни ком сумішей слугував поліетиленполіамін. Встановлено вплив РО і CaCO3 на вміст гель-фракцій та фізико- механічні властивості виробу. З використанням скануючої елект- ронної мікроскопії показана морфологія отриманих зразків.
dc.description.abstractPhysico-mechanical properties of the products based on filled epoxy-oligomeric mixtures composed of Epidian-5 epoxy resin, oligoesteracrylate TGM-3 and monoperoxide derivative of Epidian-6 epoxy resin (PO) have been investigated. CaCO3 was used as a filler and polyethylene polyamine was a curing agent. The effect of PO and CaCO3 on the gel-fraction content and physicomechanical properties was examined. Using a scanning electron microscopy (SEM) the morphology of the samples has been studied.
dc.format.extent360-364
dc.format.pages5
dc.identifier.citationEpoxy Composites Filled with Natural Calcium Carbonate. 1. Epoxy Composites Obtained in the Presence of Monoperoxy Derivative of Epidian-6 Epoxy Resin / Michael Bratychak, Olena Astakhova, Olena Shyshchak, Olha Zubal, Maciej Sienkiewicz, Ostap Ivashkiv // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2019. — Vol 13. — No 3. — P. 360–364.
dc.identifier.citationenEpoxy Composites Filled with Natural Calcium Carbonate. 1. Epoxy Composites Obtained in the Presence of Monoperoxy Derivative of Epidian-6 Epoxy Resin / Michael Bratychak, Olena Astakhova, Olena Shyshchak, Olha Zubal, Maciej Sienkiewicz, Ostap Ivashkiv // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2019. — Vol 13. — No 3. — P. 360–364.
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/46480
dc.language.isoen
dc.publisherВидавництво Львівської політехніки
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofChemistry & Chemical Technology, 3 (13), 2019
dc.relation.references1. Hetmanchuk Yu., BratychakM.:Khimiya Vysokomoleculiarnykh Spoluk. Vyd-vo Lviv Polytechnic, Lviv 2008.
dc.relation.references2. Hetmanchuk Yu., BratychakM.:Khimiya i Technologiya Oligomeriv. Vyd-vo Kyiv Univ., Кyiv 2008.
dc.relation.references3. BratychakM., BratychakMykh.: Peroksydni Pohidni Epoksydnykh Smol. Vyd-vo Lviv Polytechnic, Lviv 2003.
dc.relation.references4. Ellis B.: Chemistry and Technology of Epoxy Resins. Blackie Academic and Professional, London 1993.
dc.relation.references5. Iatsyshyn O., Astakhova O., Shyshchak O. et al.: Chem. Chem. Technol., 2013, 7, 73. https://doi.org/10.23939/chcht07.01.073
dc.relation.references6. Bashta B., Astakhova O., Shyshchak O., BratychakM..: Chem. Chem. Technol., 2014, 8, 309. https://doi.org/10.23939/chcht08.03.309
dc.relation.references7. BratychakM., Ivashkiv O., Bruzdziak P. et al.: Polimery, 2016, 61, 316. https://doi.org/10.14314/polimery.2016.316
dc.relation.references8. BratychakM., Kochubei V., Shust O. et al.: Chem. Chem. Technol., 2011, 5, 41.
dc.relation.references9. Poh C.,MariattiM., AhmadM. et al.: J. Mater. Sci.Mater. Electron., 2014, 25, 2111. https://doi.org/10.1007/s10854-014-1847-9
dc.relation.references10. Ng C., Ash B., Schadler L. et al.: Adv. Compos. Lett., 2001, 10, 101. https://doi.org/10.1177/096369350101000301
dc.relation.references11. Ng C., Schadler L., Siegel R.:Nanostruct. Mater., 1999, 12, 507. https://doi.org/10.1016/S0965-9773(99)00170-1
dc.relation.references12. Tee D.,MariattiM., Azizan A. et al.: Compos. Sci. Technol., 2007, 67, 2584. https://doi.org/10.1016/j.compscitech.2006.12.007
dc.relation.references13. Shi G., ZhangM.-Q., RongM.-Z. et al.:Wear, 2003, 254, 784. https://doi.org/10.1016/S0043-1648(03)00190-X
dc.relation.references14. Tang L.-C., Wan Y.-J., YanD et al.: Carbon, 2013, 60, 16. https://doi.org/10.1016/j.carbon.2013.03.050
dc.relation.references15. Schueler R., Petermann J., Schulte K. et al.: J. Appl. Polym. Sci., 1997, 63, 1741. https://doi.org/10.1002/(SICI)1097-4628(19970328)63:13<1741::AID-APP5>3.0.CO;2-G
dc.relation.references16. Lee J.-Y., ShimM.-J., Kim S.-W.:Mater. Chem. Phys., 1997, 48, 36. https://doi.org/10.1016/S0254-0584(97)80073-9
dc.relation.references17. Leong Y., Abu Bakar M.,Mohd Oshak Z. et al.: J. Appl. Polym. Sci., 2004, 91, 3315. https://doi.org/10.1002/app.13542
dc.relation.references18. Shi Q., Wang L., Yu H. et al.:Macromol. Mater. Eng., 2006, 291, 53. https://doi.org/10.1002/mame.200500223
dc.relation.references19. Mustata F., Tudirachi N., Rosu D.: Compos. Part B-Eng., 2012, 43, 702. https://doi.org/10.1016/j.compositesb.2011.11.047
dc.relation.references20. Yu H., Wang L., Shi Q. et al.: Prog. Org. Coat., 2006, 55, 296. https://doi.org/10.1016/j.porgcoat.2006.01.007
dc.relation.references21. He H., Li K.,Wang J. et al.:Mater. Design, 2011, 32, 4521. https://doi.org/10.1016/j.matdes.2011.03.026
dc.relation.references22. Mohan T., KannyK.: Compos. Part A-Appl. S., 2011, 42, 385. https://doi.org/10.1016/j.compositesa.2010.12.010
dc.relation.references23. Yung K., Zhu B., Yue T. et al.: Compos. Sci. Technol., 2009, 69, 260. https://doi.org/10.1016/j.compscitech.2008.10.014
dc.relation.references24. Yilmar M., Unal H.,Mimaroglu A.: Express Polym. Lett., 2008, 2, 890. https://doi.org/10.3144/expresspolymlett.2008.104
dc.relation.references25. Astakhova O., ShvedM., Zubal O. et al.: Chem. Chem. Technol., 2019, 13, 112. https://doi.org/10.23939/chcht13.01.112
dc.relation.references26. Ivanov V.: Rukovodstvo k Prakticheskim Rabotam po Khimii Polimerov. Izd-vo Leningrad. Univ., Leningrad 1982.
dc.relation.referencesen1. Hetmanchuk Yu., BratychakM.:Khimiya Vysokomoleculiarnykh Spoluk. Vyd-vo Lviv Polytechnic, Lviv 2008.
dc.relation.referencesen2. Hetmanchuk Yu., BratychakM.:Khimiya i Technologiya Oligomeriv. Vyd-vo Kyiv Univ., Kyiv 2008.
dc.relation.referencesen3. BratychakM., BratychakMykh., Peroksydni Pohidni Epoksydnykh Smol. Vyd-vo Lviv Polytechnic, Lviv 2003.
dc.relation.referencesen4. Ellis B., Chemistry and Technology of Epoxy Resins. Blackie Academic and Professional, London 1993.
dc.relation.referencesen5. Iatsyshyn O., Astakhova O., Shyshchak O. et al., Chem. Chem. Technol., 2013, 7, 73. https://doi.org/10.23939/chcht07.01.073
dc.relation.referencesen6. Bashta B., Astakhova O., Shyshchak O., BratychakM.., Chem. Chem. Technol., 2014, 8, 309. https://doi.org/10.23939/chcht08.03.309
dc.relation.referencesen7. BratychakM., Ivashkiv O., Bruzdziak P. et al., Polimery, 2016, 61, 316. https://doi.org/10.14314/polimery.2016.316
dc.relation.referencesen8. BratychakM., Kochubei V., Shust O. et al., Chem. Chem. Technol., 2011, 5, 41.
dc.relation.referencesen9. Poh C.,MariattiM., AhmadM. et al., J. Mater. Sci.Mater. Electron., 2014, 25, 2111. https://doi.org/10.1007/s10854-014-1847-9
dc.relation.referencesen10. Ng C., Ash B., Schadler L. et al., Adv. Compos. Lett., 2001, 10, 101. https://doi.org/10.1177/096369350101000301
dc.relation.referencesen11. Ng C., Schadler L., Siegel R.:Nanostruct. Mater., 1999, 12, 507. https://doi.org/10.1016/S0965-9773(99)00170-1
dc.relation.referencesen12. Tee D.,MariattiM., Azizan A. et al., Compos. Sci. Technol., 2007, 67, 2584. https://doi.org/10.1016/j.compscitech.2006.12.007
dc.relation.referencesen13. Shi G., ZhangM.-Q., RongM.-Z. et al.:Wear, 2003, 254, 784. https://doi.org/10.1016/S0043-1648(03)00190-X
dc.relation.referencesen14. Tang L.-C., Wan Y.-J., YanD et al., Carbon, 2013, 60, 16. https://doi.org/10.1016/j.carbon.2013.03.050
dc.relation.referencesen15. Schueler R., Petermann J., Schulte K. et al., J. Appl. Polym. Sci., 1997, 63, 1741. https://doi.org/10.1002/(SICI)1097-4628(19970328)63:13<1741::AID-APP5>3.0.CO;2-G
dc.relation.referencesen16. Lee J.-Y., ShimM.-J., Kim S.-W.:Mater. Chem. Phys., 1997, 48, 36. https://doi.org/10.1016/S0254-0584(97)80073-9
dc.relation.referencesen17. Leong Y., Abu Bakar M.,Mohd Oshak Z. et al., J. Appl. Polym. Sci., 2004, 91, 3315. https://doi.org/10.1002/app.13542
dc.relation.referencesen18. Shi Q., Wang L., Yu H. et al.:Macromol. Mater. Eng., 2006, 291, 53. https://doi.org/10.1002/mame.200500223
dc.relation.referencesen19. Mustata F., Tudirachi N., Rosu D., Compos. Part B-Eng., 2012, 43, 702. https://doi.org/10.1016/j.compositesb.2011.11.047
dc.relation.referencesen20. Yu H., Wang L., Shi Q. et al., Prog. Org. Coat., 2006, 55, 296. https://doi.org/10.1016/j.porgcoat.2006.01.007
dc.relation.referencesen21. He H., Li K.,Wang J. et al.:Mater. Design, 2011, 32, 4521. https://doi.org/10.1016/j.matdes.2011.03.026
dc.relation.referencesen22. Mohan T., KannyK., Compos. Part A-Appl. S., 2011, 42, 385. https://doi.org/10.1016/j.compositesa.2010.12.010
dc.relation.referencesen23. Yung K., Zhu B., Yue T. et al., Compos. Sci. Technol., 2009, 69, 260. https://doi.org/10.1016/j.compscitech.2008.10.014
dc.relation.referencesen24. Yilmar M., Unal H.,Mimaroglu A., Express Polym. Lett., 2008, 2, 890. https://doi.org/10.3144/expresspolymlett.2008.104
dc.relation.referencesen25. Astakhova O., ShvedM., Zubal O. et al., Chem. Chem. Technol., 2019, 13, 112. https://doi.org/10.23939/chcht13.01.112
dc.relation.referencesen26. Ivanov V., Rukovodstvo k Prakticheskim Rabotam po Khimii Polimerov. Izd-vo Leningrad. Univ., Leningrad 1982.
dc.relation.urihttps://doi.org/10.23939/chcht07.01.073
dc.relation.urihttps://doi.org/10.23939/chcht08.03.309
dc.relation.urihttps://doi.org/10.14314/polimery.2016.316
dc.relation.urihttps://doi.org/10.1007/s10854-014-1847-9
dc.relation.urihttps://doi.org/10.1177/096369350101000301
dc.relation.urihttps://doi.org/10.1016/S0965-9773(99)00170-1
dc.relation.urihttps://doi.org/10.1016/j.compscitech.2006.12.007
dc.relation.urihttps://doi.org/10.1016/S0043-1648(03)00190-X
dc.relation.urihttps://doi.org/10.1016/j.carbon.2013.03.050
dc.relation.urihttps://doi.org/10.1002/(SICI)1097-4628(19970328)63:13<1741::AID-APP5>3.0.CO;2-G
dc.relation.urihttps://doi.org/10.1016/S0254-0584(97)80073-9
dc.relation.urihttps://doi.org/10.1002/app.13542
dc.relation.urihttps://doi.org/10.1002/mame.200500223
dc.relation.urihttps://doi.org/10.1016/j.compositesb.2011.11.047
dc.relation.urihttps://doi.org/10.1016/j.porgcoat.2006.01.007
dc.relation.urihttps://doi.org/10.1016/j.matdes.2011.03.026
dc.relation.urihttps://doi.org/10.1016/j.compositesa.2010.12.010
dc.relation.urihttps://doi.org/10.1016/j.compscitech.2008.10.014
dc.relation.urihttps://doi.org/10.3144/expresspolymlett.2008.104
dc.relation.urihttps://doi.org/10.23939/chcht13.01.112
dc.rights.holder© Національний університет „Львівська політехніка“, 2019
dc.rights.holder© Bratychak M., Astakhova O., Shyshchak O., Zubal O., Sienkiewicz M., Ivashkiv O., 2019
dc.subjectепоксидна смола
dc.subjectолігоестеракрилат
dc.subjectпероксид
dc.subjectCaCO3
dc.subjectгель-фракція
dc.subjectфізико-механічні властивості
dc.subjectСЕМ
dc.subjectepoxy resin
dc.subjectoligoesteracrylate
dc.subjectperoxide
dc.subjectCaCO3
dc.subjectgel-fraction
dc.subjectphysico-mechanical properties
dc.subjectSEM
dc.titleEpoxy Composites Filled with Natural Calcium Carbonate. 1. Epoxy Composites Obtained in the Presence of Monoperoxy Derivative of Epidian-6 Epoxy Resin
dc.title.alternativeЕпоксидні композити з натуральним наповнювачем карбонатом кальцію. 1. Одержання епоксидних композитів у присутності монопероксидної похідної епоксидної смоли epidian-6
dc.typeArticle

Files

Original bundle
Now showing 1 - 2 of 2
No Thumbnail Available
Name:
2019v13n3_Bratychak_M-Epoxy_Composites_Filled_360-364.pdf
Size:
643.14 KB
Format:
Adobe Portable Document Format
Download
No Thumbnail Available
Name:
2019v13n3_Bratychak_M-Epoxy_Composites_Filled_360-364__COVER.png
Size:
517.06 KB
Format:
Portable Network Graphics
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
3.02 KB
Format:
Plain Text
Description:
Download

Collections

Chemistry & Chemical Technology. – 2019. – Vol. 13, No. 3