Dielectric behavior of SBS/polyaniline thermally processable blends

Simple item page
dc.citation.epage446
dc.citation.issue4
dc.citation.journalTitleChemistry & Chemical Technology
dc.citation.spage441
dc.citation.volume12
dc.contributor.affiliationUniversidade Federal do Rio de Janeiro, Cidade Universitária, Rio de Janeiro, Brasil
dc.contributor.affiliationSri Jayachamarajendra College of Engineering, Mysore, India
dc.contributor.authorFernando, G.
dc.contributor.authorSouza, Jr.
dc.contributor.authorSoares, Bluma G.
dc.contributor.authorSilveira, Fabiola
dc.contributor.authorRenukappa, N. M.
dc.contributor.authorSiddaramaiah
dc.coverage.placenameLviv
dc.date.accessioned2019-06-21T07:58:03Z
dc.date.available2019-06-21T07:58:03Z
dc.date.created2018-01-20
dc.date.issued2018-01-20
dc.description.abstractОдержано триблок-кополімерні суміші сти- рен-бутадієн-стирену (СБС) з різними концентраціями поліані- ліну (ПАН). Визначено вплив таких параметрів, як концент- рація ПАН, частота та температура на електричні влас- тивості: густину, діелектричну проникність, тангенс кута втрат та провідність змінного струму. Показано, що незначне зменшення об'ємного питомого опору як функції температури, є корисним за умов утрудненого контролю температури. Встановлено, що зразок із 45% мас. ПАН потенційно може бути використаний у полі електромагнітного випромінювання. Доведено, що електрична провідність суміші переважає йонне транспортування. Одержані матеріали можна викорис- товувати як стратегічний, недорогий, екологічно чистий матеріал у різних суміжних сферах.
dc.description.abstract1Styrene–butadiene–styrene triblock copolymer (SBS) blends were prepared using different weight ratios of conducting polyaniline (PANI). Several electrical properties such as volume resistivity, dielectric constant, dissipation factor and alternating current conductivity of the blends were studied pointing to understand the influence of different parameters like PANI concentration, frequency, and temperature on these properties. The prepared materials present a slight reduction in volume resistivity as a function of temperature, being useful in conditions where the temperature control is hard. More than this, dielectric constant tests allowed inferring that among tested samples, the one filled with 45 wt % of PANI is potentially able to be used in the electromagnetic dissipation field. Finally, the alternating current tests allowed to prove that the electrical conduction of the blend is mainly dominated by ionic transportation. Therefore, prepared materials can be considered as a strategic, low-cost, environmentally friendly material which can be used in various border fields.
dc.format.extent441-446
dc.format.pages6
dc.identifier.citationDielectric behavior of SBS/polyaniline thermally processable blends / Fernando G., Souza Jr., Bluma G. Soares, Fabiola Silveira, N. M. Renukappa, Siddaramaiah // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 4. — P. 441–446.
dc.identifier.citationenDielectric behavior of SBS/polyaniline thermally processable blends / Fernando G., Souza Jr., Bluma G. Soares, Fabiola Silveira, N. M. Renukappa, Siddaramaiah // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2018. — Vol 12. — No 4. — P. 441–446.
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/45208
dc.language.isoen
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofChemistry & Chemical Technology, 4 (12), 2018
dc.relation.references[1]Melad O., Jarur M.: Chem. Chem. Technol., 2016, 10, 41.https://doi.org/10.23939/chcht10.01.041
dc.relation.references[2] Yatsyshyn M., Makogon V., Reshetnyak O. et al.: Chem. Chem. Technol., 2016, 10, 429. https://doi.org/10.23939/chcht10.04.429
dc.relation.references[3] Thorat S., Kulkarni M., Thorat G.: Chem. Chem. Technol.,2015, 9, 143. https://doi.org/10.23939/chcht09.02.143
dc.relation.references[4] Souza Jr F., da Silva A., de Oliveira G. et al.: Ind. Crops Prod.,2015, 68, 97. https://doi.org/10.1016/j.indcrop.2014.09.032
dc.relation.references[5] Souza Jr F., Soares B., Mantovani G. et al.: Polymer, 2006, 47,2163. https://doi.org/10.1016/j.polymer.2006.01.033
dc.relation.references[6] Souza Jr F., Soares B., Siddaramaiah et al.:Mater. Sci. Eng. A,2008, 476, 240. https://doi.org/10.1016/j.msea.2007.05.099
dc.relation.references[7] Liao C., ZhangM., YaoM. et al.: AdvMater., 2015, 27, 7493.https://doi.org/10.1002/adma.201402625
dc.relation.references[8]Mokhtari F., Salehi M., Zamani F. et al.: Text. Prog., 2016, 48,119. https://doi.org/10.1080/00405167.2016.1201934
dc.relation.references[9] Souza Jr F., Pinto J., Soares B.: Eur. Polym. J., 2007, 43, 2007.https://doi.org/10.1016/j.eurpolymj.2007.02.037
dc.relation.references[10] Kumar V., Yokozeki T., Goto T., Takahashi T.: Polymer, 2016,86, 129. https://doi.org/10.1016/j.polymer.2016.01.054
dc.relation.references[11] Ferreira S., da Silva A., Souza Jr. F. et al.: J. BiobasedMater. Bioenerg., 2014, 8, 578. https://doi.org/10.1166/jbmb.2014.1478
dc.relation.references[12] Souza Jr F., Soares B., Dahmouche K.: J. Polym. Sci. B, 2007,45, 3069. https://doi.org/10.1002/polb.21305
dc.relation.references[13] Khatoon H., Ahmad S.: J. Ind. Eng. Chem., 2017, 53, 1.https://doi.org/10.1016/j.jiec.2017.03.036
dc.relation.references[14]Malti A., Tu D., Edberg J. et al.: Org. Electron., 2017, 50, 304.https://doi.org/10.1016/j.orgel.2017.07.043
dc.relation.references[15] Stejskal J., Bober P., TrchováM. et al.: SyntheticMet., 2017,224, 109. https://doi.org/10.1016/j.synthmet.2016.12.029
dc.relation.references[16]Mehra N., Mu L., Ji T. et al.: Compos. Sci. Technol., 2017,151, 115. https://doi.org/10.1016/j.compscitech.2017.08.010
dc.relation.references[17] Souza Jr F., Michel R., Soares B.: Polym. Test., 2005, 24, 998.https://doi.org/10.1016/j.polymertesting.2005.08.001
dc.relation.references[18] Qi S., Craig D.: Adv. Drug. Deliv. Rev., 2016, 100, 67.https://doi.org/10.1016/j.addr.2016.01.003
dc.relation.references[19]MurariuM., Dubois P.: Adv. Drug. Deliv. Rev., 2016, 107, 17.https://doi.org/10.1016/j.addr.2016.04.003
dc.relation.references[20] Rafique I., Kausar A., Anwar Z., Muhammad B.: Polym. Plast. Technol. Eng., 2016, 55, 312.https://doi.org/10.1080/03602559.2015.1070874
dc.relation.references[21] Aïssa B., HabibM., Abdul-Hafidh E. et al.: Int. J. Mater. Eng. Innovat., 2015, 6, 185.https://doi.org/10.1504/IJMATEI.2015.072207
dc.relation.references[22] Sousa A., Vilela C., Fonseca A. et al.: Polym. Chem., 2015, 6,5961. https://doi.org/10.1039/C5PY00686D
dc.relation.references[23] Drakopoulos S., Karger-Kocsis J., Kmetty Á. et al.: Carbohydr. Polym., 2017, 157, 711.https://doi.org/10.1016/j.carbpol.2016.10.036
dc.relation.references[24] Saba N., ParidahM., JawaidM.: Constr. Build. Mater., 2015,76, 87. https://doi.org/10.1016/j.conbuildmat.2014.11.043
dc.relation.references[25] Das A., Sallat A., Böhme F. et al.: ACS Appl. Mater. Interface., 2015, 7, 20623. https://doi.org/10.1021/acsami.5b05041
dc.relation.references[26] Imbernon L., Oikonomou E., Norvez S., Leibler L.: Polym. Chem., 2015, 6, 4271. https://doi.org/10.1039/C5PY00459D
dc.relation.references[27] Yu B-C., Jung J-W., Park K., Goodenough J.: Energ. Environ. Sci., 2017, 10, 86. https://doi.org/10.1039/C6EE02770A
dc.relation.references[28] HamsanM., Shukur M., Kadir M.: Ionics, 2017, 23; 3429. https://doi.org/10.1007/s11581-017-2155-1
dc.relation.references[29] Zeglio E., Schmidt M., Thelakkat M. et al.: Chem. Mater.,2017, 29, 4293. https://doi.org/10.1021/acs.chemmater.7b00474
dc.relation.references[30] Suriani A., NurhafizahM., Mohamed A. et al.: J. Mater. Sci.,2017, 52, 6611. https://doi.org/10.1007/s10853-017-0897-9
dc.relation.references[31] George N., Bipinbal P., Bhadran B. et al.: Polymer, 2017, 112,264. https://doi.org/10.1016/j.polymer.2017.01.082
dc.relation.references[32] Li L., Zhao P., Luo Y. et al.: RSC Adv., 2017, 7, 1093.https://doi.org/10.1039/C6RA26155H
dc.relation.references[33] Kim H., Ahn K., Lee S.: Polymer, 2017, 110, 187.https://doi.org/10.1016/j.polymer.2017.01.007
dc.relation.references[34] García-Uriostegui L., Pineda-Torres G., López-Ramírez S. et al.: Polym. Eng. Sci., 2017, 57, 1214.https://doi.org/10.1002/pen.24499
dc.relation.references[35] Yin Q., Wen Y., Jia H. et al.: J. Mater. Sci., 2017, 52, 10814.https://doi.org/10.1007/s10853-017-1251-y
dc.relation.references[36] Qi X., Xiu H., Wei Y. et al.: Compos. Sci. Technol., 2017, 139,8. https://doi.org/10.1016/j.compscitech.2016.12.007
dc.relation.references[37] Perrin F., Oueiny C.: React. Funct. Polym., 2017, 114, 86.https://doi.org/10.1016/j.reactfunctpolym.2017.03.009
dc.relation.references[38] Souza Jr F., Pinto J., de Oliveira G., Soares B.: Polym. Test.,2007, 26, 720. https://doi.org/10.1016/j.polymertesting.2007.03.004
dc.relation.references[39] Souza Jr F., Soares B., Siddaramaiah et al.: Polymer, 2006, 47,7548. https://doi.org/10.1016/j.polymer.2006.08.026
dc.relation.references[40] Souza Jr F., Soares B.: Polym. Test., 2006, 25, 512.https://doi.org/10.1016/j.polymertesting.2006.01.014
dc.relation.references[41] Souza Jr F., Soares B., Pinto J.:Macromol. Mater. Eng., 2006,291, 463. https://doi.org/10.1002/mame.200500406
dc.relation.references[42] Souza Jr F., Sirelli L., Michel R. et al.: J. Appl. Polym. Sci.,2006, 102, 535. https://doi.org/10.1002/app.24280
dc.relation.references[43] Grove T., MastersM., Miers R.: Am. J. Phys., 2005, 73, 52.https://doi.org/10.1119/1.1794757
dc.relation.references[44] Souza Jr F., Oliveira G., Anzai T. et al.:Macromol. Mater. Eng., 2009, 294, 739. https://doi.org/10.1002/mame.200900111
dc.relation.references[45] Bohren C.: Am. J. Phys., 2017, 85, 165.https://doi.org/10.1119/1.4975385
dc.relation.references[46] Xiang T., Zheng Q., Qin S.: IEEE Trans. Dielectr. Electr. Insul., 2017, 24, 1197. https://doi.org/10.1109/TDEI.2017.005956
dc.relation.references[47]Matsouka D., Vassiliadis S., Mitilineos S. et al.: J. Text Inst.,2017, 109, 1. https://doi.org/10.1080/00405000.2017.1330174
dc.relation.references[48] Luo X., Wang J., Dooner M., Clarke J.: Appl. Energ., 2015,137, 511. https://doi.org/10.1016/j.apenergy.2014.09.081
dc.relation.references[49] Bhavani G., Ganesan S., Selvasekarapandian S. et al.: Ionics,2016, 22, 581. https://doi.org/10.1007/s11581-015-1565-1
dc.relation.references[50] Baskey H., Johari E., Akhtar M.: IEEE Trans. Electromagn. Compat., 2017, 59, 1060.https://doi.org/10.1109/TEMC.2016.2639060
dc.relation.references[51] AbdallaM.: Prog. Electromagn. Res. Lett., 2013, 39, 63.https://doi.org/10.2528/PIERL13022207
dc.relation.references[52]Wang Y., Chen Y., Zhou Y., Fu H.: DEStech. Trans. Comput. Sci. Eng., 2016. https://doi.org/10.12783/dtcse/iceiti2016/6153
dc.relation.references[53] Bhadra S., Singha N., Khastgir D.: Curr. Appl. Phys., 2009, 9,396. https://doi.org/10.1016/j.cap.2008.03.009
dc.relation.references[54] Samet M., Levchenko V., Boiteux G. et al.: J. Chem. Phys.,2015, 142, 194703. https://doi.org/10.1063/1.4919877
dc.relation.references[55] Yousefi N., Sun X., Lin X. et al.: Adv. Mater., 2014, 26, 5480.https://doi.org/10.1002/adma.201305293
dc.relation.references[56] Rogti F., Ferhat M.: J. Electrost., 2014, 72, 91.https://doi.org/10.1016/j.elstat.2013.11.012
dc.relation.references[57] Yu X., Yi B., Liu F., Wang X.: React. Funct. Polym., 2008, 68,1557. https://doi.org/10.1016/j.reactfunctpolym.2008.08.009
dc.relation.references[58] Chaloupka A., Wedel A., Taha I. et al.:alysis. Mater. Sci. Forum., 2015, 825-826, 944.https://doi.org/10.4028/www.scientific.net/MSF.825-826.944
dc.relation.references[59] SabaN., JawaidM., AlothmanO., ParidahM.:Constr. Build. Mater.,2016, 106, 149. https://doi.org/10.1016/j.conbuildmat.2015.12.075
dc.relation.references[60] Shukla N., Thakur A., Shukla A., Marx D.: Int. J. Electrochem. Sci., 2014, 9, 7644.
dc.relation.references[61] Amin A., Ahmed E., SabaaM. et al.: Polym Bull., 2016, 73,147. https://doi.org/10.1007/s00289-015-1477-2
dc.relation.referencesen[1]Melad O., Jarur M., Chem. Chem. Technol., 2016, 10, 41.https://doi.org/10.23939/chcht10.01.041
dc.relation.referencesen[2] Yatsyshyn M., Makogon V., Reshetnyak O. et al., Chem. Chem. Technol., 2016, 10, 429. https://doi.org/10.23939/chcht10.04.429
dc.relation.referencesen[3] Thorat S., Kulkarni M., Thorat G., Chem. Chem. Technol.,2015, 9, 143. https://doi.org/10.23939/chcht09.02.143
dc.relation.referencesen[4] Souza Jr F., da Silva A., de Oliveira G. et al., Ind. Crops Prod.,2015, 68, 97. https://doi.org/10.1016/j.indcrop.2014.09.032
dc.relation.referencesen[5] Souza Jr F., Soares B., Mantovani G. et al., Polymer, 2006, 47,2163. https://doi.org/10.1016/j.polymer.2006.01.033
dc.relation.referencesen[6] Souza Jr F., Soares B., Siddaramaiah et al.:Mater. Sci. Eng. A,2008, 476, 240. https://doi.org/10.1016/j.msea.2007.05.099
dc.relation.referencesen[7] Liao C., ZhangM., YaoM. et al., AdvMater., 2015, 27, 7493.https://doi.org/10.1002/adma.201402625
dc.relation.referencesen[8]Mokhtari F., Salehi M., Zamani F. et al., Text. Prog., 2016, 48,119. https://doi.org/10.1080/00405167.2016.1201934
dc.relation.referencesen[9] Souza Jr F., Pinto J., Soares B., Eur. Polym. J., 2007, 43, 2007.https://doi.org/10.1016/j.eurpolymj.2007.02.037
dc.relation.referencesen[10] Kumar V., Yokozeki T., Goto T., Takahashi T., Polymer, 2016,86, 129. https://doi.org/10.1016/j.polymer.2016.01.054
dc.relation.referencesen[11] Ferreira S., da Silva A., Souza Jr. F. et al., J. BiobasedMater. Bioenerg., 2014, 8, 578. https://doi.org/10.1166/jbmb.2014.1478
dc.relation.referencesen[12] Souza Jr F., Soares B., Dahmouche K., J. Polym. Sci. B, 2007,45, 3069. https://doi.org/10.1002/polb.21305
dc.relation.referencesen[13] Khatoon H., Ahmad S., J. Ind. Eng. Chem., 2017, 53, 1.https://doi.org/10.1016/j.jiec.2017.03.036
dc.relation.referencesen[14]Malti A., Tu D., Edberg J. et al., Org. Electron., 2017, 50, 304.https://doi.org/10.1016/j.orgel.2017.07.043
dc.relation.referencesen[15] Stejskal J., Bober P., TrchováM. et al., SyntheticMet., 2017,224, 109. https://doi.org/10.1016/j.synthmet.2016.12.029
dc.relation.referencesen[16]Mehra N., Mu L., Ji T. et al., Compos. Sci. Technol., 2017,151, 115. https://doi.org/10.1016/j.compscitech.2017.08.010
dc.relation.referencesen[17] Souza Jr F., Michel R., Soares B., Polym. Test., 2005, 24, 998.https://doi.org/10.1016/j.polymertesting.2005.08.001
dc.relation.referencesen[18] Qi S., Craig D., Adv. Drug. Deliv. Rev., 2016, 100, 67.https://doi.org/10.1016/j.addr.2016.01.003
dc.relation.referencesen[19]MurariuM., Dubois P., Adv. Drug. Deliv. Rev., 2016, 107, 17.https://doi.org/10.1016/j.addr.2016.04.003
dc.relation.referencesen[20] Rafique I., Kausar A., Anwar Z., Muhammad B., Polym. Plast. Technol. Eng., 2016, 55, 312.https://doi.org/10.1080/03602559.2015.1070874
dc.relation.referencesen[21] Aïssa B., HabibM., Abdul-Hafidh E. et al., Int. J. Mater. Eng. Innovat., 2015, 6, 185.https://doi.org/10.1504/IJMATEI.2015.072207
dc.relation.referencesen[22] Sousa A., Vilela C., Fonseca A. et al., Polym. Chem., 2015, 6,5961. https://doi.org/10.1039/P.5PY00686D
dc.relation.referencesen[23] Drakopoulos S., Karger-Kocsis J., Kmetty Á. et al., Carbohydr. Polym., 2017, 157, 711.https://doi.org/10.1016/j.carbpol.2016.10.036
dc.relation.referencesen[24] Saba N., ParidahM., JawaidM., Constr. Build. Mater., 2015,76, 87. https://doi.org/10.1016/j.conbuildmat.2014.11.043
dc.relation.referencesen[25] Das A., Sallat A., Böhme F. et al., ACS Appl. Mater. Interface., 2015, 7, 20623. https://doi.org/10.1021/acsami.5b05041
dc.relation.referencesen[26] Imbernon L., Oikonomou E., Norvez S., Leibler L., Polym. Chem., 2015, 6, 4271. https://doi.org/10.1039/P.5PY00459D
dc.relation.referencesen[27] Yu B-C., Jung J-W., Park K., Goodenough J., Energ. Environ. Sci., 2017, 10, 86. https://doi.org/10.1039/P.6EE02770A
dc.relation.referencesen[28] HamsanM., Shukur M., Kadir M., Ionics, 2017, 23; 3429. https://doi.org/10.1007/s11581-017-2155-1
dc.relation.referencesen[29] Zeglio E., Schmidt M., Thelakkat M. et al., Chem. Mater.,2017, 29, 4293. https://doi.org/10.1021/acs.chemmater.7b00474
dc.relation.referencesen[30] Suriani A., NurhafizahM., Mohamed A. et al., J. Mater. Sci.,2017, 52, 6611. https://doi.org/10.1007/s10853-017-0897-9
dc.relation.referencesen[31] George N., Bipinbal P., Bhadran B. et al., Polymer, 2017, 112,264. https://doi.org/10.1016/j.polymer.2017.01.082
dc.relation.referencesen[32] Li L., Zhao P., Luo Y. et al., RSC Adv., 2017, 7, 1093.https://doi.org/10.1039/P.6RA26155H
dc.relation.referencesen[33] Kim H., Ahn K., Lee S., Polymer, 2017, 110, 187.https://doi.org/10.1016/j.polymer.2017.01.007
dc.relation.referencesen[34] García-Uriostegui L., Pineda-Torres G., López-Ramírez S. et al., Polym. Eng. Sci., 2017, 57, 1214.https://doi.org/10.1002/pen.24499
dc.relation.referencesen[35] Yin Q., Wen Y., Jia H. et al., J. Mater. Sci., 2017, 52, 10814.https://doi.org/10.1007/s10853-017-1251-y
dc.relation.referencesen[36] Qi X., Xiu H., Wei Y. et al., Compos. Sci. Technol., 2017, 139,8. https://doi.org/10.1016/j.compscitech.2016.12.007
dc.relation.referencesen[37] Perrin F., Oueiny C., React. Funct. Polym., 2017, 114, 86.https://doi.org/10.1016/j.reactfunctpolym.2017.03.009
dc.relation.referencesen[38] Souza Jr F., Pinto J., de Oliveira G., Soares B., Polym. Test.,2007, 26, 720. https://doi.org/10.1016/j.polymertesting.2007.03.004
dc.relation.referencesen[39] Souza Jr F., Soares B., Siddaramaiah et al., Polymer, 2006, 47,7548. https://doi.org/10.1016/j.polymer.2006.08.026
dc.relation.referencesen[40] Souza Jr F., Soares B., Polym. Test., 2006, 25, 512.https://doi.org/10.1016/j.polymertesting.2006.01.014
dc.relation.referencesen[41] Souza Jr F., Soares B., Pinto J.:Macromol. Mater. Eng., 2006,291, 463. https://doi.org/10.1002/mame.200500406
dc.relation.referencesen[42] Souza Jr F., Sirelli L., Michel R. et al., J. Appl. Polym. Sci.,2006, 102, 535. https://doi.org/10.1002/app.24280
dc.relation.referencesen[43] Grove T., MastersM., Miers R., Am. J. Phys., 2005, 73, 52.https://doi.org/10.1119/1.1794757
dc.relation.referencesen[44] Souza Jr F., Oliveira G., Anzai T. et al.:Macromol. Mater. Eng., 2009, 294, 739. https://doi.org/10.1002/mame.200900111
dc.relation.referencesen[45] Bohren C., Am. J. Phys., 2017, 85, 165.https://doi.org/10.1119/1.4975385
dc.relation.referencesen[46] Xiang T., Zheng Q., Qin S., IEEE Trans. Dielectr. Electr. Insul., 2017, 24, 1197. https://doi.org/10.1109/TDEI.2017.005956
dc.relation.referencesen[47]Matsouka D., Vassiliadis S., Mitilineos S. et al., J. Text Inst.,2017, 109, 1. https://doi.org/10.1080/00405000.2017.1330174
dc.relation.referencesen[48] Luo X., Wang J., Dooner M., Clarke J., Appl. Energ., 2015,137, 511. https://doi.org/10.1016/j.apenergy.2014.09.081
dc.relation.referencesen[49] Bhavani G., Ganesan S., Selvasekarapandian S. et al., Ionics,2016, 22, 581. https://doi.org/10.1007/s11581-015-1565-1
dc.relation.referencesen[50] Baskey H., Johari E., Akhtar M., IEEE Trans. Electromagn. Compat., 2017, 59, 1060.https://doi.org/10.1109/TEMC.2016.2639060
dc.relation.referencesen[51] AbdallaM., Prog. Electromagn. Res. Lett., 2013, 39, 63.https://doi.org/10.2528/PIERL13022207
dc.relation.referencesen[52]Wang Y., Chen Y., Zhou Y., Fu H., DEStech. Trans. Comput. Sci. Eng., 2016. https://doi.org/10.12783/dtcse/iceiti2016/6153
dc.relation.referencesen[53] Bhadra S., Singha N., Khastgir D., Curr. Appl. Phys., 2009, 9,396. https://doi.org/10.1016/j.cap.2008.03.009
dc.relation.referencesen[54] Samet M., Levchenko V., Boiteux G. et al., J. Chem. Phys.,2015, 142, 194703. https://doi.org/10.1063/1.4919877
dc.relation.referencesen[55] Yousefi N., Sun X., Lin X. et al., Adv. Mater., 2014, 26, 5480.https://doi.org/10.1002/adma.201305293
dc.relation.referencesen[56] Rogti F., Ferhat M., J. Electrost., 2014, 72, 91.https://doi.org/10.1016/j.elstat.2013.11.012
dc.relation.referencesen[57] Yu X., Yi B., Liu F., Wang X., React. Funct. Polym., 2008, 68,1557. https://doi.org/10.1016/j.reactfunctpolym.2008.08.009
dc.relation.referencesen[58] Chaloupka A., Wedel A., Taha I. et al.:alysis. Mater. Sci. Forum., 2015, 825-826, 944.https://doi.org/10.4028/www.scientific.net/MSF.825-826.944
dc.relation.referencesen[59] SabaN., JawaidM., AlothmanO., ParidahM.:Constr. Build. Mater.,2016, 106, 149. https://doi.org/10.1016/j.conbuildmat.2015.12.075
dc.relation.referencesen[60] Shukla N., Thakur A., Shukla A., Marx D., Int. J. Electrochem. Sci., 2014, 9, 7644.
dc.relation.referencesen[61] Amin A., Ahmed E., SabaaM. et al., Polym Bull., 2016, 73,147. https://doi.org/10.1007/s00289-015-1477-2
dc.relation.urihttps://doi.org/10.23939/chcht10.01.041
dc.relation.urihttps://doi.org/10.23939/chcht10.04.429
dc.relation.urihttps://doi.org/10.23939/chcht09.02.143
dc.relation.urihttps://doi.org/10.1016/j.indcrop.2014.09.032
dc.relation.urihttps://doi.org/10.1016/j.polymer.2006.01.033
dc.relation.urihttps://doi.org/10.1016/j.msea.2007.05.099
dc.relation.urihttps://doi.org/10.1002/adma.201402625
dc.relation.urihttps://doi.org/10.1080/00405167.2016.1201934
dc.relation.urihttps://doi.org/10.1016/j.eurpolymj.2007.02.037
dc.relation.urihttps://doi.org/10.1016/j.polymer.2016.01.054
dc.relation.urihttps://doi.org/10.1166/jbmb.2014.1478
dc.relation.urihttps://doi.org/10.1002/polb.21305
dc.relation.urihttps://doi.org/10.1016/j.jiec.2017.03.036
dc.relation.urihttps://doi.org/10.1016/j.orgel.2017.07.043
dc.relation.urihttps://doi.org/10.1016/j.synthmet.2016.12.029
dc.relation.urihttps://doi.org/10.1016/j.compscitech.2017.08.010
dc.relation.urihttps://doi.org/10.1016/j.polymertesting.2005.08.001
dc.relation.urihttps://doi.org/10.1016/j.addr.2016.01.003
dc.relation.urihttps://doi.org/10.1016/j.addr.2016.04.003
dc.relation.urihttps://doi.org/10.1080/03602559.2015.1070874
dc.relation.urihttps://doi.org/10.1504/IJMATEI.2015.072207
dc.relation.urihttps://doi.org/10.1039/C5PY00686D
dc.relation.urihttps://doi.org/10.1016/j.carbpol.2016.10.036
dc.relation.urihttps://doi.org/10.1016/j.conbuildmat.2014.11.043
dc.relation.urihttps://doi.org/10.1021/acsami.5b05041
dc.relation.urihttps://doi.org/10.1039/C5PY00459D
dc.relation.urihttps://doi.org/10.1039/C6EE02770A
dc.relation.urihttps://doi.org/10.1007/s11581-017-2155-1
dc.relation.urihttps://doi.org/10.1021/acs.chemmater.7b00474
dc.relation.urihttps://doi.org/10.1007/s10853-017-0897-9
dc.relation.urihttps://doi.org/10.1016/j.polymer.2017.01.082
dc.relation.urihttps://doi.org/10.1039/C6RA26155H
dc.relation.urihttps://doi.org/10.1016/j.polymer.2017.01.007
dc.relation.urihttps://doi.org/10.1002/pen.24499
dc.relation.urihttps://doi.org/10.1007/s10853-017-1251-y
dc.relation.urihttps://doi.org/10.1016/j.compscitech.2016.12.007
dc.relation.urihttps://doi.org/10.1016/j.reactfunctpolym.2017.03.009
dc.relation.urihttps://doi.org/10.1016/j.polymertesting.2007.03.004
dc.relation.urihttps://doi.org/10.1016/j.polymer.2006.08.026
dc.relation.urihttps://doi.org/10.1016/j.polymertesting.2006.01.014
dc.relation.urihttps://doi.org/10.1002/mame.200500406
dc.relation.urihttps://doi.org/10.1002/app.24280
dc.relation.urihttps://doi.org/10.1119/1.1794757
dc.relation.urihttps://doi.org/10.1002/mame.200900111
dc.relation.urihttps://doi.org/10.1119/1.4975385
dc.relation.urihttps://doi.org/10.1109/TDEI.2017.005956
dc.relation.urihttps://doi.org/10.1080/00405000.2017.1330174
dc.relation.urihttps://doi.org/10.1016/j.apenergy.2014.09.081
dc.relation.urihttps://doi.org/10.1007/s11581-015-1565-1
dc.relation.urihttps://doi.org/10.1109/TEMC.2016.2639060
dc.relation.urihttps://doi.org/10.2528/PIERL13022207
dc.relation.urihttps://doi.org/10.12783/dtcse/iceiti2016/6153
dc.relation.urihttps://doi.org/10.1016/j.cap.2008.03.009
dc.relation.urihttps://doi.org/10.1063/1.4919877
dc.relation.urihttps://doi.org/10.1002/adma.201305293
dc.relation.urihttps://doi.org/10.1016/j.elstat.2013.11.012
dc.relation.urihttps://doi.org/10.1016/j.reactfunctpolym.2008.08.009
dc.relation.urihttps://doi.org/10.4028/www.scientific.net/MSF.825-826.944
dc.relation.urihttps://doi.org/10.1016/j.conbuildmat.2015.12.075
dc.relation.urihttps://doi.org/10.1007/s00289-015-1477-2
dc.rights.holder© Національний університет „Львівська політехніка“, 2018
dc.rights.holder©Souza Jr. F., Soares B., Silveira F., Renukappa N., Siddaramaiah,2018
dc.subjectСБС
dc.subjectполіанілін
dc.subjectсуміш розплавів
dc.subjectдіелектрична поведінка
dc.subjectSBS
dc.subjectpolyaniline
dc.subjectmelt blending
dc.subjectdielectric behavior
dc.titleDielectric behavior of SBS/polyaniline thermally processable blends
dc.title.alternativeДіелектрична поведінка термообробленої суміші СБС/поліанілін
dc.typeArticle

Files

Original bundle

Now showing 1 - 2 of 2
Thumbnail Image
Name:
2018v12n4_Fernando_G-Dielectric_behavior_of_441-446.pdf
Size:
408.99 KB
Format:
Adobe Portable Document Format
Download
Thumbnail Image
Name:
2018v12n4_Fernando_G-Dielectric_behavior_of_441-446__COVER.png
Size:
559.33 KB
Format:
Portable Network Graphics
Download

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
3.02 KB
Format:
Plain Text
Description:
Download

Collections

Chemistry & Chemical Technology. – 2018. – Vol. 12, No. 4