Forming of crude oil mixtures with increased yield of target fractions

Simple item page
dc.citation.epage386
dc.citation.issue3
dc.citation.spage383
dc.citation.volume11
dc.contributor.affiliationState Higher Educational Institution “Ukrainian State Chemical Technological University”
dc.contributor.affiliationLviv Polytechnic National University
dc.contributor.affiliationJSC “Ukrtatnafta”
dc.contributor.authorTertyshna, Olena
dc.contributor.authorMartynenko, Vitalina
dc.contributor.authorZamikula, Kostyantyn
dc.contributor.authorTopilnytskyy, Petro
dc.contributor.authorHolych, Yurii
dc.coverage.placenameLviv
dc.date.accessioned2018-06-21T09:53:12Z
dc.date.available2018-06-21T09:53:12Z
dc.date.created2017-01-20
dc.date.issued2017-01-20
dc.description.abstractПроаналізовано і узагальнено результати дослідження компонентного складу і фізико-хімічних властивостей 5 зразків нафти. Виявлено та встановлено взаємозв’язок між компонентним, структурно-груповим складом та фізико-хімічними характеристиками з метою експресної та достовірної класифікації нафти. Розроблено принцип визначення рецептури та порядку формування нафтових сумішей, які забезпечують максимальний вихід цільових фракцій, що базується на поєднанні методів моделювання, кластерного та статистичного аналізів. Експериментально підтверджено доцільність запропоно- ваного способу формування нафтових сумішей.
dc.description.abstractResearch results of 5 samples of crude oil have been analyzed and generalized. The relationship between component, structural-group composition and physicochemical properties have been determined to classify crude oil reliably and rapidly. Compounding and sequence of crude oil mixture forming have been developed to provide the maximum yield of target fractions. These principles are based on combination of simulation method, cluster and statistic analyses. The expediency of the proposed forming method has been confirmed experimentally.
dc.format.extent383-386
dc.format.pages4
dc.identifier.citationForming of crude oil mixtures with increased yield of target fractions / Olena Tertyshna, Vitalina Martynenko, Kostyantyn Zamikula, Petro Topilnytskyy, Yurii Holych // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2017. — Vol 11. — No 3. — P. 383–386.
dc.identifier.citationenForming of crude oil mixtures with increased yield of target fractions / Olena Tertyshna, Vitalina Martynenko, Kostyantyn Zamikula, Petro Topilnytskyy, Yurii Holych // Chemistry & Chemical Technology. — Lviv : Lviv Politechnic Publishing House, 2017. — Vol 11. — No 3. — P. 383–386.
dc.identifier.urihttps://ena.lpnu.ua/handle/ntb/42091
dc.language.isoen
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofChemistry & Chemical Technology, 3 (11), 2017
dc.relation.references[1] Evdokimov I., Losev A., Fesan A.: Burenie Nefti, 2012, 1, 27.
dc.relation.references[2] Ovcharov S., Pikalov G., Pikaloc S.: Khim. Technol. Topliv Masel, 2005, 1, 37.
dc.relation.references[3] ASTM D 86-05 Standard test method for distillation of petroleum products at atmospheric pressure EN ISO 3405:2000 Petroleum products – Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000).
dc.relation.references[4] ASTM D 1298-99e2 Standard test method for density, relative density (specific gravity), or API gravity of crude petroleum and liquid petroleum products by hydrometer method EN ISO 3675:1998 Crude petroleum and liquid petroleum products – Laboratory determination of density – Hydrometer method (ISO 3675:1998).
dc.relation.references[5] ASTM D 4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital DensityMeter.
dc.relation.references[6] ASTM D 445-04е1 Standard test method for kinematic viscosity of transparent and opaque liquids (the calculation of dynamic viscosity).
dc.relation.references[7] ASTM D97-17 Standard Test Method for Pour Point of Petroleum Products. (ISO 3016:1994 Petroleum Products – Determination of Pour Point).
dc.relation.references[8] Eremenko V., Pereidenko A.: Vost. Evr. Zh. Perdovykh Technol., 2010, 43, 40.
dc.relation.references[9] Umanets T.: Zagalna Teoria Statystyky. Znannia, Kyiv 2006.
dc.relation.references[10] Tertyshna O.: VIII Int. Conf. “Advance in Petroleum and Gas Chemistry and Petrochemistry”, Ukraine, Lviv 2016, 24.
dc.relation.references[11] Ovcharov S., Pikalov G., Pikalov S., Ovcharova A.: Sbornik Nauchn. Trudov SevKavNIPIgaza, 2004, 41, 319.
dc.relation.referencesen[1] Evdokimov I., Losev A., Fesan A., Burenie Nefti, 2012, 1, 27.
dc.relation.referencesen[2] Ovcharov S., Pikalov G., Pikaloc S., Khim. Technol. Topliv Masel, 2005, 1, 37.
dc.relation.referencesen[3] ASTM D 86-05 Standard test method for distillation of petroleum products at atmospheric pressure EN ISO 3405:2000 Petroleum products – Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000).
dc.relation.referencesen[4] ASTM D 1298-99e2 Standard test method for density, relative density (specific gravity), or API gravity of crude petroleum and liquid petroleum products by hydrometer method EN ISO 3675:1998 Crude petroleum and liquid petroleum products – Laboratory determination of density – Hydrometer method (ISO 3675:1998).
dc.relation.referencesen[5] ASTM D 4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital DensityMeter.
dc.relation.referencesen[6] ASTM D 445-04e1 Standard test method for kinematic viscosity of transparent and opaque liquids (the calculation of dynamic viscosity).
dc.relation.referencesen[7] ASTM D97-17 Standard Test Method for Pour Point of Petroleum Products. (ISO 3016:1994 Petroleum Products – Determination of Pour Point).
dc.relation.referencesen[8] Eremenko V., Pereidenko A., Vost. Evr. Zh. Perdovykh Technol., 2010, 43, 40.
dc.relation.referencesen[9] Umanets T., Zagalna Teoria Statystyky. Znannia, Kyiv 2006.
dc.relation.referencesen[10] Tertyshna O., VIII Int. Conf. "Advance in Petroleum and Gas Chemistry and Petrochemistry", Ukraine, Lviv 2016, 24.
dc.relation.referencesen[11] Ovcharov S., Pikalov G., Pikalov S., Ovcharova A., Sbornik Nauchn. Trudov SevKavNIPIgaza, 2004, 41, 319.
dc.rights.holder© Національний університет „Львівська політехніка“, 2017
dc.rights.holder© Tertyshna O., Martynenko V., Zamikula K., Topilnytskyy P., Holych Yu., 2017
dc.subjectнафта
dc.subjectсуміш
dc.subjectкомпаундування
dc.subjectмоделювання
dc.subjectцільова фракція
dc.subjectcrude oil
dc.subjectmixture
dc.subjectcompounding
dc.subjectsimulation
dc.subjecttarget fraction
dc.titleForming of crude oil mixtures with increased yield of target fractions
dc.title.alternativeФормування нафтових сумішей з підвищеним виходом цільових фракцій
dc.typeArticle

Files

Original bundle

Now showing 1 - 2 of 2
Thumbnail Image
Name:
2017v11n3_Tertyshna_O-Forming_of_crude_oil_383-386.pdf
Size:
335.92 KB
Format:
Adobe Portable Document Format
Download
Thumbnail Image
Name:
2017v11n3_Tertyshna_O-Forming_of_crude_oil_383-386__COVER.png
Size:
514.29 KB
Format:
Portable Network Graphics
Download

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
3.02 KB
Format:
Plain Text
Description:
Download

Collections

Chemistry & Chemical Technology. – 2017. – Vol. 11, No. 3